Abstract:Concrete pavings are widely used in the construction industry as flooring for decorative and structural purposes in the gardens, parks, and roads of America, and Europe. In the present study, the effects of pyrite, corundum, and water-retaining polymer additives on the surface wear resistance of concrete pavings were investigated. Concrete pavings were poured in 2 stages and all of the bottom layers of samples were the same, but upper layers of pavings were produced by adding pyrite in the ratio of 0.10, 0.20, 0.30, 0.40 according to the mass of the aggregate, 5 kg /m2 corundum-based surface hardener to the paving surface area, and a high amount of water-absorbing polymer at a ratio of 0.05 and 0.10 to the water content of the mixture. Vertical abrasion, splitting tensile strength, water absorption, freeze-thaw resistance, pendulum footed friction, and surface hardness measurements with Schmidt test hammer experiments were made to TS 2824 EN 1338 standard. Also, X-ray diffraction (XRD) and Scanning Electron Microscopy (SEM) analyses were carried out to characterize the produced materials. Results of the study indicate that the use of pyrite, corundum, and water-retaining polymers provided improvements in the surface wear resistance of concrete pavings.Concrete pavings are widely used in the construction industry as flooring for decorative and structural purposes in the gardens, parks, and roads of America, and Europe. In the present study, the effects of pyrite, corundum, and water-retaining polymer additives on the surface wear resistance of concrete pavings were investigated. Concrete pavings were poured in 2 stages and all of the bottom layers of samples were the same, but upper layers of pavings were produced by adding pyrite in the ratio of 0.10, 0.20, 0.30, 0.40 according to the mass of the aggregate, 5 kg /m2 corundum-based surface hardener to the paving surface area, and a high amount of water-absorbing polymer at a ratio of 0.05 and 0.10 to the water content of the mixture. Vertical abrasion, splitting tensile strength, water absorption, freeze-thaw resistance, pendulum footed friction, and surface hardness measurements with Schmidt test hammer experiments were made to TS 2824 EN 1338 standard. Also, X-ray diffraction (XRD) and Scanning Electron Microscopy (SEM) analyses were carried out to characterize the produced materials. Results of the study indicate that the use of pyrite, corundum, and water-retaining polymers provided improvements in the surface wear resistance of concrete pavings.

Resistance of some outdoor pavements to destructive combined effects in cold regions

Characterizations and Quantification of Freeze-Thaw Behaviors of Recycled Brick Aggregate Concrete

Heavy aggregate and different admixtures effect on pavings: pyrite, corundum and water-retaining polymer

Effect of SAPs and polypropylene fibres on the freeze-thaw resistance of low carbon roller compacted concrete pavement

Study on the Freeze-Thaw Resistance of Concrete Pavements in Seasonally Frozen Regions

Freeze–thaw resistance of pervious concrete produced with different aggregates and fibres

Impact of Freeze-Thaw Cycles on the Long-Term Performance of Concrete Pavement and Related Improvement Measures: A Review

Influence of Service Conditions and Mix Design on the Physical–Mechanical Properties of Roller-Compacted Concrete for Pavement

Evaluation of mechanical and durability properties of engineered cementitious composites exposed to sulfate attack and freeze–thaw cycle

Research on Performance Deterioration of Internally Cured Pavement Concrete under the Coupling Effect of Salt Freeze-Thaw

Sustainability of concrete pavements considering traffic and de-icing agents

Laboratory mix preparation and investigation of mechanical behaviour of polyurethane-bound porous rubber pavement

Chloride Permeability and Deterioration Mechanism of Pavement Concrete Under Load–Temperature Coupling

Effect of Freeze–Thaw Cycles on the Pavement Performance of SBS Modified and Composite Crumb Rubber Modified Asphalt Mixtures

Comparison of the Polishing Resistances of Concrete Pavement Surface Textures Prepared with Different Technologies Using the Aachen Polishing Machine

STRENGTH, ABRASION RESISTANCE AND FROST RESISTANCE OF FIBER CONCRETE OF HARD PAVEMENT WITH BASALT FIBER AND AIR-ENTRAINING ADMIXTURE

Shear Resistance Performance Evaluations of Rubber Asphalt Waterproof Adhesive Layer on Bridge Deck

The Effects of Hybrid Steel/Basalt Fibers on the Durability of Concrete Pavement against Freeze-Thaw Cycles

Material Design and Performance Analysis of the Anti-Ice and Antiskid Wear Layer on Pavement

Effects of Fiber and Surface Treatment on Airport Pavement Concrete against Freeze–Thawing and Salt Freezing

Influence of Combined Air-Entraining Superplasticizer and Surface Treatments on Airport Pavement Concrete Against Salt Freezing