Abstract:Nonlinear quasi-zero stiffness (QZS) has recently attracted significant attention from the scientific and engineering community as a method for designing low-frequency vibration isolators. However, previous studies primarily used bistable structures and linear springs to provide negative and positive stiffness, respectively, which limits the QZS range and loading capacity of QZS isolators. This work proposes a novel nonlinear stiffness-modulated anti-vibration structure combined with a disc spring group and a volute spring and demonstrates its feasibility for low-frequency vibration isolation under heavy loads. The asymmetrical negative stiffness provided by the disc spring group and hardened positive stiffness provided by the volute spring compensate each other to construct QZS characteristics. Their nonlinearities can weaken each other, which can lead to a wide QZS range. At the QZS position, the disc springs and the volute spring together provide the positive force, which ensures a large loading capacity. By adjusting the design parameters, different QZS characteristics can be conveniently realized. Compared with traditional QZS structures and typical X-shaped structures, the QZS range of the proposed anti-vibration structure can be, respectively, extended by 2.3 and 1.5 times without sacrificing loading capacity. The dynamic equation is derived from the original nonlinear force expression rather than the typical polynomial approximation expression, which can improve the accuracy of the results, especially under large excitation. The displacement transmissibility obtained by the alternating frequency–time harmonic balance method indicates that the proposed anti-vibration structure exhibits the best vibration isolation performance compared with the linear isolators, traditional QZS isolators, and typical X-shaped isolators. In addition, such a stiffness-modulated anti-vibration structure has a higher sensitivity to damping and a lower sensitivity to base excitation amplitude, which makes it more potential for engineering applications. Besides, the validity of the theoretical analysis is verified by static compression tests and dynamic experiments. This work provides a new method for designing and analysing QZS isolators for heavy-duty low-frequency vibration isolation required in many engineering practices.

Machine Learning-Driven Design Optimization of Buckling-Induced Quasi-Zero Stiffness Metastructures for Low-Frequency Vibration Isolation

Design of a metastructure for vibration isolation with quasi-zero-stiffness characteristics using bistable curved beam

A Straight-Arch-straight Beam Tandem Quasi-Zero Stiffness Structure

Inverse-designed metastructures with customizable low dynamic stiffness characteristics for low-frequency vibration isolation

Nonlinear static and dynamic response of a metastructure exhibiting quasi-zero-stiffness characteristics for vibration control: an experimental validation

Design and Performance Study of Metamaterial with Quasi-zero Stiffness Characteristics Based on Human Body Structure

Design of broad quasi-zero stiffness platform metamaterials for vibration isolation

Uncertainty analysis of quasi-zero stiffness metastructure for vibration isolation performance

Design of piezoelectric quasi-zero-stiffness metastructures for improved low-frequency vibration isolation

Multi-layer quasi-zero-stiffness meta-structure for high-efficiency vibration isolation at low frequency

The Design and Analysis of a Novel Passive Quasi-Zero Stiffness Vibration Isolator

Modeling and Design of Zero‐Stiffness Elastomer Springs Using Machine Learning

Modeling of programmable low-frequency isolator with quasi-zero stiffness metamaterials

Parametric control of quasi-zero stiffness mechanisms for vibration isolation at near-zero frequencies

Origami-inspired quasi-zero stiffness metamaterials for low-frequency multi-direction vibration isolation

Tailored Mechanical Metamaterials with Programmable Quasi‐Zero‐Stiffness Features for Full‐Band Vibration Isolation

A tunable metamaterial using a single beam element with quasi-zero-stiffness characteristics for low-frequency vibration isolation

Data-driven Design of Well-Behaved Nonlinear Structures: A Case Study on the Von Mises Truss

3D-Printed Programmable Mechanical Metamaterials for Vibration Isolation and Buckling Control

A compact nonlinear stiffness-modulated structure for low-frequency vibration isolation under heavy loads

Design of Kagome Lattice Composite Sandwich Metastructures with High Load Bearing and Low Frequency Vibration Reduction Properties