Abstract:Abstract Background: The phenomenon of bronze disease is considered as the most important factor in the destruction of bronze objects. Different methods have been proposed to deal with it. The most important inhibitors used in this regard are BTA and AMT. While these inhibitors control the corrosion, they are toxic and cancerous. In ideal conditions, these inhibitors are able to slow down the activity of chlorine ion, but leave some side effects after a period of treatment. Today, plant extracts are used for this purpose. In this study, Robinia pseudoacania L extract was selected for this purpose. Material and methods: The acacia fruit extract (200ppm to 1800 ppm) was used to the prevention of corrosion inhibition of bronze alloy in corrosive sodium chloride solution 0.5 M. The Bronze alloy used in this research, was made based on the same percentage as the ancient alloys (Cu-10Sn). This alloy was used for the effect of corrosion inhibitors in the potentiostat device, the weight loss method. The experiment was conducted in split plot desgin in time based on the randomized complete design in four replications. Results: Mean comparison showed that the highest rate of corrosion inhibition (93.5%) was obtained at a concentration of 1800 ppm and with increasing the concentration of the extract, corrosion inhibition also increased. EDX analysis of the control sample matrix showed that the amount of chlorine, which is the most important factor in the destruction of bronze disease, was 8.47%wt while in the presence of corrosive sodium chloride solution, after 4 weeks, the amount of chlorine detected was 3.20%wt. According to the morphology (needle and rhombus) of these corrosion products based on the SEM image, it can be said that they are of the type of atacamite and paratacamite that have caused bronze disease in historical bronze works. At higher concentrations of acacia extract, the presence and growth of fungi has been observed, which can cause poor performance of acacia extract in the long run. Conclusion: the natural inhibitor of acacia fruit aqueous extract can play an effective role in inhibiting corrosion of bronze, but at higher concentrations, it became fungal, which can reduce the role of acacia fruit aqueous extract and even ineffective. Because natural inhibitors can play an effective role in preventing the corrosion of bronze works. But to get better performance of these inhibitors, more tests need to be done to improve and optimize.

Evaluation of green inhibitors for corrosion control of bronze by using thin layer activation method

The use of Robinia pseudoacacia L fruit extract as a green corrosion inhibitor in the protection of copper-based objects

Comparative study of the efficiency of inhibitors and coatings for bronze artifacts

Raman investigation of artificial patinas on recent bronze protected by different azole type inhibitors in an outdoor environment

Study on the compounding of cysteine modified Schiff base and decanoic acid as corrosion inhibitors for bronze with patina

Ability to Use of Robinia Pseudoacania L Fruit Extract as a Natural Corrosion Inhibitor in the Protection of Historical Bronze Objects

The Use of Robinia Pseudoacania L Fruit Extract as a Natural Corrosion Inhibitor in the Protection of Historical Bronze Objects

Green Inhibitors for Corrosion Protection of Metals and Alloys: An Overview

Anti-corrosion investigation of pyrimidine derivatives as green and sustainable corrosion inhibitor for N80 steel in highly corrosive environment: Experimental and AFM/XPS study

Corrosion inhibition of copper alloy of archaeological artifacts in chloride salt solution using Aloe vera green inhibitor

Organic Green Corrosion Inhibitors Derived from Natural and/or Biological Sources for Conservation of Metals Cultural Heritage

Enhancing Permanence of Corrosion Inhibitors Within Acrylic Protective Coatings for Outdoor Bronze Using Green Nanocontainers

Green and high-efficiency corrosion inhibitors for metals: a review

In-depth experimental assessment of two new aminocoumarin derivatives as corrosion inhibitors for carbon steel in HCl media combined with AFM, SEM/EDX, contact angle, and DFT/MDs simulations

Sustainable Inhibitors for Corrosion Mitigation in Aggressive Corrosive Media: A Comprehensive Study

Computational, theoretical and experimental studies of four amino acids as corrosion inhibitors for brass in 3% NaCl medium

A novel method to protect bronze in atmospheric environment: the click-assembly of triazole film

Assessment of the Inhibitory Efficacy of a Thiazole Derivative as an Efficient Corrosion Inhibitor for Augmenting the Resistance of MS in Acidic Environments

A Review on Green Corrosion Inhibitors for Protection of Archeological Metal Artifacts

Impact of novel ZnO/PAA nanocomposite as corrosion inhibitor on mild steel in 5% HCl

Protective treatments for copper alloy artworks: preliminary studies of sodium oxalate and limewater effectiveness against bronze disease