Abstract:A spray reactor in which the liquid phase containing dissolved p-xylene (pX) and the catalyst is dispersed as fine droplets by a nozzle into a continuous vapor phase containing the oxidant (O2) is shown to produce high-purity terephthalic acid (TPA) with less than 25ppm 4-carboxybenzaldehyde (4-CBA) in the solid TPA product. In sharp contrast, the solid TPA product obtained from a conventional stirred reactor similar to the configuration used in the conventional Mid-Century (MC) process contains nearly 1000ppm 4-CBA even though the reactor is operated at similar pressure and temperature (15bar and 200°C) but with the gas phase dispersed into the liquid phase. The dramatic improvement in TPA product quality during spray reactor operation is attributed to two main factors: the alleviation of interphase gas–liquid mass transfer limitations that facilitates more complete oxidation of the pX and the intermediate oxidation products to TPA, and reduced backmixing that enhances the oxidation rates. Theoretical calculations show that the time constants for O2 diffusion in typical spray droplets (50μm diameter) is 1–2 orders of magnitude lower than the kinetic rate constant confirming complete O2 penetration and saturation of the droplets. Further, the usage of CO2 as an inert gas and the dominance of acetic acid (>50mol.%) in the vapor phase under reaction conditions create an environment that falls outside of the flammability envelope. Mathematical modeling of the stirred reactor using MC process conditions accurately predicts the steady state temperatures observed in industrial reactors. The model also clearly divulges that the cooling provided by partial evaporation of the acetic acid solvent is vital to maintain stable steady state operation. By eliminating the need for a hydrogenation step, the spray reactor has the potential to not only reduce capital and operating costs but also provide environmental benefits.

A New Process To Prepare Thiophene-2-Carbonyl Chloride, a Key Raw Material in the Synthesis of Tioxazafen, Utilizing a Catalytic Liquid Phase Aerobic Oxidation Reaction

Progress in the Research and Development of P-Xylene Liquid Phase Oxidation Process

Recent Advances in Catalysts for Toluene Elimination Via Catalytic Oxidation

Synthesis technology of 3-n-propyl-2, 4-dihydroxyacetophenone

Synthesis of 2-Chloro-3-chloromethyl-thiophene and Tioconazole Via Phase Transfer Catalysis

New process for canthaxanthin synthesis

New Synthesis Process of 2,7-Dimethyl-2,4,6-octatriene-1,8-dial

Catalyst-free Biphasic Oxidation of Thiophenes in Continuous-Flow

Highly Efficient and Greener Synthesis of TS-1 in a Flow System by Recycling the Mother Liquid

A Much Cleaner Oxidation Process for 2,2′-Dibenzothiazole Disulfide Synthesis Catalyzed by Phosphotungstic Acid

Triazine Frameworks for the Photocatalytic Selective Oxidation of Toluene.

Efficient and Eco-Friendly Preparation of 4-Methyl-5-formyl-thiazole

A spray reactor concept for catalytic oxidation of p-xylene to produce high-purity terephthalic acid

Development of a continuous flow process for the synthesis of mesotrione

Photocatalytic Partial Oxidation of 5-Hydroxymethylfurfural (HMF) to 2,5-Diformylfuran (DFF) over a Covalent Triazine Framework in Water

The efficient catalytic oxidation of 2,3,6-trimethylphenol with air over composite catalyst to synthesize Vitamin E intermediate

A Green Process for the Oxidative Lactonization of 1,2-Benzenedimethanol by Tungstic Acid with Aqueous H2O2

Greenness Assessment and Synthesis for the Bio-Based Production of the Solvent 2,2,5,5-Tetramethyloxolane (TMO)

Manufacturing Process Development for Belzutifan, Part 3: Completing a Streamlined Through-Process with a Safe and Scalable Oxidation

Development of a Cost-Efficient Process Toward a Key Synthetic Intermediate of the EZH2 Inhibitor PF-06821497

Efficient Oxidation with Singlet Oxygen from 5,10,15,20-Tetraphenylporphyrin under Blue LED Irradiation and Air Atmosphere: Simplified Preparation of Key Building Blocks for Natural Product Synthesis