Abstract:This study presents the preliminary outcomes of a methodology for the physical and mechanical characterization of various chestnut elements in different states of preservation. Strategizing conservation and retrofit interventions for timber is necessary, and to do this, it is necessary to establish an estimation of physical (transmissivity, thermal conductivity, humidity level, etc.) and mechanical properties (density, compressive or bending strength, etc.). This essential information is typically associated with timber defects, but there are lack of correlations. The primary objective is to establish correlations between thermal and density properties with the aim of preserving original assets. The investigation delves into the relationship between timber density and thermal properties through experimental non-destructive testing (NDT). Two NDTs were employed with the aim of correlating: penetrometric testing and active thermography investigations. The parametric study on the excitation period yielded valuable insights into the temporal dynamics of heat transfer within the timber, underscoring the significance of selecting appropriate excitation periods to capture precise thermal properties. Tabular data on relative humidity for salified, dried, and new samples provided a quantitative backdrop to these observations, unveiling the nuanced effects of humidity on the timber's thermal response. The results of this study are positioned to inform future conservation efforts by laying the groundwork for a comprehensive understanding of timber's mechanical properties. Particularly, the challenge lies in accurately estimating density, where surface tests are often less reliable than in-depth ones. Therefore, it is crucial to seek validation through other NDT tests, such as thermographic analysis and visual inspection, and hygrometric tests recognizing their importance in enhancing the reliability of density assessments. This approach will contribute to the development of more discerning preservation strategies.

Evaluation of Timber Degradation Caused by Insects to Quantify the Mechanical Strength of Load-Bearing Elements

Correlation between thermal and density properties of chestnuts: preliminary results of experimental non-destructive testing

Wood modification with N-methylol and N-methyl compounds: a case study on how non-fixated chemicals in modified wood may affect the classification of their durability

Comparative studies on the durability and moisture performance of wood modified with cyclic N-methylol and N-methyl compounds

Influence of test methodology on the characterization of the parallel-to-grain timber embedment strength and foundation modulus of dowels

Inspection and structural assessment of traditional timber floors: a practical systematization

Small-scale testing of water-saturated wooden discs for determining the strength properties of timber foundation piles

Numerical analysis of timber-to-timber joints and composite beams with inclined self-tapping screws

Structural products made of beech wood: quality assessment of the raw material

Biological durability of cross laminated timber connections

Properties evaluation and defects detection in timbers by ultrasonic non-destructive technique

Decay of wooden commodities – Moisture risk analysis, service life prediction and performance assessment in the field

Selected Methods of Diagnosis of Historic Timber Structures – Principles and Possibilities of Assessment

Laboratory Durability Testing of Preservative-Treated Wood Products

Comparative durability tests of preservative-treated and chemically modified wood – Assessment and classification on the basis of different decay tests

Comparative Study on Complete Characterisation of Elastic–Ductile Compressive Behaviour of Aged and New Norway Spruce Timber

Effects of Biological and Chemical Degradation on the Properties of Scots Pine Wood—Part I: Chemical Composition and Microstructure of the Cell Wall

Fatigue and damage evolution in wood T-shaped mortise and tenon joints

A Review of the Applicability of Non-destructive Testing for the Determination of the Fire Performance of Reused Structural Timber

Decay resistance of thermally modified Eucalyptus grandis wood against wild strains of Trametes versicolor and Pycnoporus sanguineus

Influencing Factors in Acoustic Emission Detection: A Literature Review Focusing on Grain Angle and High/Low Tree Ring Density of Scots Pine