Experimental Study of Spray and Combustion Characteristics in Gas-Centered Swirl Coaxial Injectors: Influence of Recess Ratio and Gas Swirl

Jungho Lee,Ingyu Lee,Seongphil Woo,Yeoungmin Han,Youngbin Yoon

DOI: https://doi.org/10.3390/aerospace11030209

IF: 2.66

2024-03-09

Aerospace

Abstract:The spray and combustion characteristics of a gas-centered swirl coaxial (GCSC) injector used in oxidizer-rich staged combustion cycle engines were analyzed. The study focused on varying the recess ratio, presence of gas swirl, and swirl direction to improve injector performance. The impact of the recess ratio was assessed by increasing it for gas jet-type injectors with varying momentum ratios. Gas-swirl effects were studied by comparing injectors with and without swirl against a baseline of a low recess ratio gas injection. In atmospheric pressure-spray experiments, injector performance was assessed using backlight photography, cross-sectional imaging with a structured laser illumination planar imaging technique (SLIPI), and droplet analysis using ParticleMaster. Increasing the recess ratio led to reduced spray angle and droplet size, and trends of gas swirl-type injectors were similar to those of high recess ratio gas jet-type injectors. Combustion tests involved fabricating combustion chamber heads equipped with identical injectors, varying only the injector type. Oxidizer-rich combustion gas, produced by a pre-burner, and kerosene served as propellants. Combustion characteristics, including characteristic velocity, combustion efficiency, and heat flux, were evaluated. Elevated recess ratios correlated with increased characteristic velocity and reduced differences in the momentum–flux ratios of injectors. However, increasing the recess ratio yielded diminishing returns on combustion efficiency enhancement beyond a certain threshold. Gas swirling did not augment characteristic velocity but notably influenced heat flux distribution. The trends observed in spray tests were related to combustion characteristics regarding heat flux and combustion efficiency. Additionally, it was possible to estimate changes in the location and shape of the flame according to the characteristics of the injector.

engineering, aerospace

What problem does this paper attempt to address?

This paper aims to study the spray and combustion characteristics of the gas - centered swirl coaxial injector (GCSC) in the oxidizer - rich staged - combustion - cycle engine, especially to explore the effects of different recess ratios and gas swirls on these characteristics. Specifically, the study evaluates the improvement of the injector performance by changing the recess ratio, the presence or absence of gas swirl, and the swirl direction. In the experiment, the spray characteristics of the injector were evaluated by methods such as backlight photography, structured laser illumination planar imaging (SLIPI), and particle analysis, and the combustion characteristics, such as characteristic velocity, combustion efficiency, and heat flow, were evaluated by manufacturing a combustion chamber head equipped with the same type of injector for combustion tests. The main objective of the study is to understand how these parameter changes affect the spray and combustion performance, thereby providing a basis for improving the design and performance of the injector.