Abstract:For the filling and reconstruction of non-healing bone defects, the application of porous ceramic scaffold as bone substitutes is considered to be a reasonable choice. In bone tissue engineering, an ideal scaffold must satisfy several criterias such as open porosity, having high compressive strength (it depends where in body, and if external fixatures are used) and the practicability for cell migration. Many researchers have focused on enhancing the mechanical properties of hydroxyapatite scaffolds by combining it with other biomaterials, such as bioglass and polymers. Nevertheless, there is still a lack of suitable scaffolds based on porous biomaterials. In this study, zirconia scaffolds from two different templates (polyurethane (PU) and Acrylonitrile Butadiene Styrene (ABS) templates) were successfully fabricated with dissimilar fabrication techniques. The scaffold surfaces were further modified with mesoporous bioglass for the purpose of bone tissue engineering. In the study of PU template scaffold, high porosity (~88%) sol-gel derived yttria-stabilized zirconia (YSZ) scaffold was prepared by a polyurethane (PU) foam replica method using sol-gel derived zirconia for the first time, and double coated with Mesoporous Bioglass (MBGs) coating. For the ABS template scaffold, two types of templates (cube and cylinder) with different strut spacings were used and fabricated by a 3D Rapid Prototyper. Subsequently, zirconia scaffolds with low porosity (63±2.8% to 68±2.5%) were fabricated by embedding the zirconia powder slurry into the ABS templates and burning out the ABS to produce a uniform porous structure. The zirconia scaffolds were double coated with mesoporous bioglass by dip coating for the first time. The porosities of the scaffolds were calculated before and after coating. The microstructures were then examined using scanning electron microscopy and the mechanical properties were evaluated using compressive test. Accordingly, relationships between microstructure, processing and mechanical behaviour of the porous zirconia was discussed. Scaffold biocompatibility and bioactivity was also evaluated using a bone marrow stromal cell (BMSC) proliferation test and a simulated body fluid test.

Quantifying pore characteristics in polymer glass–ceramics composite scaffolds using micro-tomography

3d Microtomographic Characterization Of Precision Fused Deposited Biocompatible Polymer Scaffolds

Computed Tomography of Polymeric Biomedical Implants from Bench to Bedside

Free-form Fabrication and Micro-Ct Characterization of Poly-/Spl Epsiv/-Caprolactone Tissue Scaffolds

Effect of Porosity and Pore Shape on the Mechanical and Biological Properties of Additively Manufactured Bone Scaffolds.

Effect of Porosity and Pore Shapes on the Mechanical and Biological Properties of Additively Manufactured Bone Scaffolds

In Vitro Evaluation of Pore Size Graded Bone Scaffolds with Different Material Composition

Micro-Computed-Tomography-Guided Analysis of In Vitro Structural Modifications in Two Types of 45S5 Bioactive Glass Based Scaffolds

Preparation and Characterization of Three-Dimensional Porous Β-Tricalcium Phosphate Scaffolds with Controlled Porous Architecture

3D microtomographic characterization of precision extruded poly-?-caprolactone scaffolds

Determining the Permeability of Porous Bioceramic Scaffolds: Significance, Overview of Current Methods and Challenges Ahead

Comparing ceramic Fischer-Koch-S and gyroid TPMS scaffolds for potential in bone tissue engineering

Strength, Toughness, and Reliability of a Porous Glass/biopolymer Composite Scaffold

Development of Porous Photopolymer Resin-SWCNT Produced by Digital Light Processing Technology Using for Bone Femur Application

Fabrication and characterization of gelatin-based biocompatible porous composite scaffold for bone tissue engineering

Fabrication and characterization of a bioactive composite scaffold based on polymeric collagen/gelatin/nano β-TCP for alveolar bone regeneration

Mechanical properties and biocompatibility of porous titanium scaffolds for bone tissue engineering

Bone Tissue Regeneration: the Role of Finely Tuned Pore Architecture of Bioactive Scaffolds Before Clinical Translation

Fabrication of Bioceramic Scaffolds with Pre-Designed Internal Architecture by Gel Casting and Indirect Stereolithography Techniques

Analysis of Mechanical Properties and Permeability of Trabecular-Like Porous Scaffold by Additive Manufacturing

Nanostructured Mesoporous Bioglass Coated Zirconia Scaffolds for Bone Tissue Engineering