Photocatalytic degradation of methylene blue dye by magnetized TiO2-silica nanoparticles from rice husk

Lekan Taofeek Popoola,Adeyinka Sikiru Yusuff,Aderibigbe Tajudeen Adejare,Sabitu Babatunde Olasupo

DOI: https://doi.org/10.1007/s13201-023-02052-8

IF: 5.411

2024-01-22

Applied Water Science

Abstract:Abstract In this current study, magnetized TiO 2 -supported SiO 2 nanoparticles, synthesized from rice husk, was applied as a photocatalyst to degrade methylene blue dye (MBD) in aqueous solution using LED lamp as light source. The effects of MBD initial concentration, TiO 2 loading, pH and illumination time on the degradation efficiency of the photocatalyst on MBD was investigated using Box–Behnken design as the experimental design tool. Photocatalyst was characterized by Fourier transform infrared, scanning electron microscopy, energy-dispersive X-ray, thermogravimetric analysis and Brunauer–Emmett–Teller. At optimum predicted point where MBD initial concentration, TiO 2 loading, pH and illumination time were 10 ppm, 15%, 6 and 75 min, respectively, the predicted and experimental percentage of MBD removed were 97.66% and 96.89%, respectively. Correlation coefficient and ANOVA justified high significance of the developed model for prediction. Experimental data fitted excellently into pseudo-second-order kinetic model. The temperature effect revealed optimum MBD photocatalytic degradation at 50 °C by TiO 2 /mRH-SNP. Characterization revealed the effects of magnetization and TiO 2 addition on the synthesized SiO 2 nanoparticles from rice husk. In conclusion, magnetized TiO 2 -silica nanoparticles from rice husk could be effectively used to degrade MBD in solution.

water resources

What problem does this paper attempt to address?

The main objective of this paper is to investigate the effectiveness of using magnetized titanium dioxide-silica nanoparticles (derived from rice husk) as a photocatalyst for the degradation of methylene blue dye (MBD).

Specifically, the paper addresses the following key issues:
1. **Material Preparation and Characteristics**: Silica nanoparticles were prepared from rice husk through thermal treatment, calcination, and a two-stage ball milling process. Magnetized silica nanoparticles (mRH-SNP) were further prepared via co-precipitation. Then, titanium dioxide was loaded onto the magnetized silica nanoparticles using the sol-gel method to obtain the photocatalyst (TiO2/mRH-SNP).
2. **Experimental Design and Optimization**: The Box-Behnken design was used to optimize the factors affecting the photocatalytic degradation efficiency, including the initial concentration of methylene blue, the loading amount of titanium dioxide, the pH of the solution, and the illumination time.
3. **Performance Evaluation**: Under optimal conditions (initial methylene blue concentration of 10 ppm, titanium dioxide loading amount of 15%, pH of 6, and illumination time of 75 minutes), the predicted and experimental methylene blue removal rates reached 97.66% and 96.89%, respectively, indicating that the developed model has high predictive accuracy.
4. **Characterization and Analysis**: The catalyst was characterized in detail using Fourier-transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), thermogravimetric analysis (TGA), and BET surface area analysis. These techniques demonstrated the effects of magnetization and titanium dioxide addition on the silica nanoparticles prepared from rice husk.
5. **Reusability Testing**: The regeneration and reuse capabilities of the photocatalyst were studied. The results showed that under optimal conditions, the photocatalyst could still effectively degrade methylene blue after five consecutive cycles.

In summary, this study aims to develop an efficient and low-cost photocatalytic system to treat wastewater containing methylene blue. The optimal working conditions were identified through experimental design and optimization, and the performance of the prepared photocatalyst was verified through various characterization methods, demonstrating its potential for practical applications.