Abstract:The objective of this paper is to develop and evaluate a new integrated multigenerational system comprised of cryogenic air separation, hydrate-based desalination, combined cycle and oxyfuel power plants, carbon dioxide amine absorption, and transcritical carbon dioxide power cycle, employing liquefied natural gas cold energy. This integrated multi-generation system, applicable for liquefied natural gas importer terminals with access to seawater, produces approximately 2,533 MW net output power and 1,985 kg/h fresh water. In addition, this integrated multi-generation process produces 16,735,861 kg/h high-purity liquid oxygen (100 mol%), 4,773,633 kg/h liquid nitrogen with 99.71 mol% purity, more than 31,724,465 kg/h high-purity gaseous nitrogen (99.9 mol%), and 90,903,230 kg/h low-purity gaseous nitrogen (83.38 mol%). About 5907.3 MW of produced power is generated by liquefied natural gas expander. The performance of this system is evaluated by energetic methods. The results of energy analysis show the specific energy consumptions of the air separation products are 0.551 kW/kg and 1.93 kW/kg for liquid oxygen and nitrogen, respectively. Moreover, in the hydrate-based desalination subsystem, the specific energy consumption is 0.5 kW/m 3 for produced pure water. The combined cycle power plant includes two gas turbines, three steam turbines, and a three-pressure level heat recovery steam generation. The thermal efficiencies of gas turbine cycles (Bryton), steam turbine cycles (Rankine) and combined power cycles are 26.3 %, 29.6 %, and 36.2 %, respectively. The flue gases from power plants enter the carbon dioxide amine absorption subsystem. The separated carbon dioxide is used as a working fluid to produce 372.1 MW power in transcritical carbon dioxide cycle. The results of energy analysis for carbon dioxide amine absorption subsystem show that the specific energy consumption, the ratio of captured carbon dioxide per unit mass of liquefied natural gas and the carbon dioxide removal efficiency are 6.60 kW/kg, 33.91 kg/tone, and 90.06 %, respectively. Approximately 2,905,000 kg/h of liquid carbon dioxide is obtained as the byproduct of this multi-generation process. Additionally, sensitivity analysis is conducted to determine key parameters influencing the main energetic indexes. Finally, the amount of attainable regasified natural gas reaches 257,523 tone/h by applying this multi-generation system with total 86 % energy efficiency.

A low-carbon polygeneration system based on a waste heat recovery system, a LNG cold energy process, and a CO2 liquefaction and separation unit

A fuel gas waste heat recovery-based multigeneration plant integrated with a LNG cold energy process, a water desalination unit, and a CO2 separation process

Exergoeconomic and environmental investigation of an innovative poly‐generation plant driven by a solid oxide fuel cell for production of electricity, cooling, desalinated water, and hydrogen

Introducing and performance evaluation of a novel Multi-Generation process for producing Power, fresh Water, oxygen and nitrogen integrated with liquefied natural gas regasification and carbon dioxide removal process

Simulation and multi-aspect analysis of a novel waste heat recovery process for a power plant producing electricity, heating, desalinated water, liquefied carbon dioxide, and natural gas

Environmental and exergoeconomic analysis of a low-carbon polygeneration process based on biomass energy, a geothermal source and a high-temperature fuel cell

Proposal of biomass/geothermal hybrid driven poly-generation plant centering cooling, heating, power, and hydrogen production with CO 2 capturing: Design and 3E evaluation

Development of an Integrated Structure for the Tri-Generation of Power, Liquid Carbon Dioxide, and Medium Pressure Steam Using a Molten Carbonate Fuel Cell, a Dual Pressure Linde-Hampson Liquefaction Plant, and a Heat Recovery Steam Generator

Development and comprehensive analyses of a hybrid solar–geothermal driven polygeneration system: Thermodynamic, exergoeconomic, and emergoenvironmental aspects

An innovative hybrid system for the polygeneration of power, heat, and liquid carbon dioxide using solid oxide fuel cell/electrolyzer technology and oxyfuel power generation cycle

Energy and Exergy Analysis of Poly-Generation System of Hydrogen and Electricity Via Coal Partial Gasification

Eco-friendly multi-heat recovery applied to an innovative integration of flue gas-driven multigeneration process and geothermal power plant: Feasibility characterization from thermo-economic-environmental aspect

Comprehensive assessment and sustainability improvement of a natural gas power plant utilizing an environmentally friendly combined cooling heating and power-desalination arrangement

Proposal and assessment of a new geothermal-based multigeneration system for cooling, heating, power, and hydrogen production, using LNG cold energy recovery

Comprehensive analysis and optimization of a low-carbon multi-generation system driven by municipal solid waste and solar thermal energy integrated with a microbial fuel cell

Energy, exergy and economic analyses of solid oxide fuel cell based polygeneration system with integrated carbon capture, desalination and liquefied natural gas cold energy utilization

Economic assessing and optimizing according to the environmental factor of a reforming cycle for producing hydrogen, cooling, and distilled water

Assessment of a sustainable multigeneration system integrating supercritical CO 2 Brayton cycle and LNG regasification: Thermodynamic and exergoeconomic evaluation

Integrating Geothermal Energy and Desalination Unit into a Poly-Generation Configuration: Comprehensive Study and Optimization

Performance Assessment of a Novel Polygeneration System Based on the Integration of Waste Plasma Gasification, Tire Pyrolysis, Gas Turbine, Supercritical CO2 Cycle and Organic Rankine Cycle

A conceptual hydrogen, heat and power polygeneration system based on biomass gasification, SOFC and waste heat recovery units: Energy, exergy, economic and emergy (4E) assessment