Renewable Tar-Derived Pd@biocarbon for Mild and Efficient Selectively Hydrodeoxygenation of Vanillin

Chunli Li,Mingxia Zhang,Hao Li,Yahui Zhang
DOI: https://doi.org/10.1021/acs.energyfuels.0c04098
2021-02-18
Abstract:As an inevitable harmful waste, biomass tar has always been considered as one of the challenges of biomass resource utilization. In this paper, biomass tar is used as the carbon source for the preparation of biocarbon with different activators in one pot. The catalysts with low Pd loading were synthesized for hydrodeoxygenation (HDO) of vanillin in the presence of poly(methylhydrosiloxane) (PMHS) as the hydrogen donor, avoiding gaseous hydrogen and high temperature. The effects of different activators (KOH and K<sub>2</sub>FeO<sub>4</sub>) and carbonization temperature on the structure and catalytic performance of the as-prepared catalysts were investigated in detail. The characterization results showed that activated by K<sub>2</sub>FeO<sub>4</sub> and carbonized at 800 °C had abundant surface acid groups and a high degree of graphitization. Further evaluation of the catalytic activity showed that had the highest catalytic activity and can achieve 94.6% vanillin conversion at 65 °C for 2 h. The mechanism study indicated that the high HDO activity is attributed to the synergistic effect of the active metal Pd and biocarbon with surface acidic hydroxyl groups and the good graphitization structure. Compared with KOH, K<sub>2</sub>FeO<sub>4</sub> can improve the graphitization degree of biocarbon and lead to catalysts with stronger acidity, providing more acid sites for the HDO of vanillin. Furthermore, the as-prepared catalyst has shown favorable recyclability after four uses. These findings not only provide a new idea for the green treatment of waste biomass tar but also give a reference value for the HDO of bio-oil under mild conditions.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.energyfuels.0c04098?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.energyfuels.0c04098</a>.ICP results of the and BC-KFe-800; the semiquantitative analysis results of different oxygen-containing groups of catalysts; BET analysis results of the fresh and used ; C 1s XPS spectra of catalysts; TEM and HAADF-STEM images and corresponding EDX elemental maps of the fresh ; TEM and HAADF-STEM images and corresponding EDX elemental maps of the used ; (a) XRD patterns and (b) N<sub>2</sub> adsorption–desorption isotherms of the fresh and used ; O 1s and Pd 3d XPS spectra of the fresh and used ; two possible scenarios of how acidic surface groups on the carbon support can affect the adsorption of [H]. Acidic groups can affect the adsorption of [H] on the support near metal–support interface (a); and transfer charge to Pd particles, which affects the adsorption of [H] on the Pd (b) (<a class="ext-link" href="/doi/suppl/10.1021/acs.energyfuels.0c04098/suppl_file/ef0c04098_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.
energy & fuels,engineering, chemical
What problem does this paper attempt to address?