Challenges and key requirements of batteries for electric vertical takeoff and landing aircraft

Xiao-Guang Yang,Teng Liu,Shanhai Ge,Eric Rountree,Chao-Yang Wang

DOI: https://doi.org/10.1016/j.joule.2021.05.001

IF: 46.048

2021-07-01

Joule

Abstract:Electric vertical takeoff and landing (eVTOL) aircraft have attracted considerable interest as a disruptive technology to transform future transportation systems. Their unique operating profiles and requirements present grand challenges to batteries. This work identifies the primary battery requirements for eVTOL in terms of specific energy and power, fast charging, cycle life, and safety, revealing that eVTOL batteries have more stringent requirements than electric vehicle batteries in all aspects. Notably, we find that fast charging is essential for downsizing aircraft and batteries for low cost while achieving high vehicle utilization rates to maximize revenues. We experimentally demonstrate two energy-dense Li-ion battery designs that can recharge adequate energy for 80 km eVTOL trips in 5–10 min and sustain over 2,000 fast-charge cycles, laying a foundation for eVTOL batteries.

materials science, multidisciplinary,chemistry, physical,energy & fuels

What problem does this paper attempt to address?

The problems that this paper attempts to solve mainly focus on the technical challenges of batteries for electric vertical take - off and landing aircraft (eVTOL). Specifically, the paper analyzes the requirements of eVTOL batteries in the following aspects:

1. **Specific energy and power**: eVTOL batteries require higher specific energy and power to meet the energy demands of the aircraft in various stages such as take - off, hovering, climbing, cruising, and landing. By analyzing the power requirements in different flight stages, the paper points out that the peak discharge rate and continuous discharge rate of eVTOL batteries are much higher than those of electric vehicle (EV) batteries.

2. **Fast charging**: Fast charging is crucial for eVTOL, as it can reduce the size of the aircraft and the battery, thereby reducing costs and increasing vehicle utilization to maximize profits. The paper emphasizes that any fast - charging technology needs to meet three indicators simultaneously: the charging time does not exceed the passenger transfer gap (5 - 10 minutes), the charged energy is sufficient to support the next flight, and it has a long cycle life.

3. **Cycle life**: Due to the frequent use of eVTOL during peak hours, the cycle life requirements of the battery are very high. The paper estimates that eVTOL batteries may need to experience 1,600 equivalent full cycles (EFCs) per year, while a typical EV battery only needs to experience about 45 EFCs per year.

4. **Safety**: The safety requirements for eVTOL batteries are more stringent. It is not only necessary to prevent fire or explosion, but also to be able to continue working after a safety incident until a safe landing is achieved.

The paper demonstrates two high - energy - density lithium - ion battery designs through experiments. These designs can charge enough energy within 5 - 10 minutes to support an 80 - kilometer eVTOL flight and can maintain more than 2,000 fast - charging cycles. These preliminary designs lay the foundation for the development of eVTOL batteries.

Overall, this paper aims to reveal the strict requirements of eVTOL batteries in terms of specific energy, power, fast charging, cycle life, and safety, and proposes some preliminary design schemes to promote the commercialization process of eVTOL technology.