Abstract:Further experiments are conducted in this study using a different chemical etchant, namely, HF + HNO3 + CH3COOH, with slight modifications in temperature. The chemicals used are HF + HNO3 + CH3COOH at temperatures of 50 °C and room temperature, with etching time durations of 2, 5, 10, and 15 min, respectively. Finally, an ultralow reflectivity of below 2% is achieved after a 5 min etching duration using the chemical etchant HF + HNO3 + CH3COOH at 50 °C on the mc‐silicon wafer. This study proposes a method to enhance the efficiency and optical properties of silicon solar cells made from as‐cut boron‐doped p‐type multicrystalline silicon (mi‐Si) wafers through acid‐based chemical texturization. Achieving lower reflectance is crucial for improving solar cell efficiency, and this can be attained through optimized chemical etching. The research demonstrates achieving a reflectance below 2% on the wafer surface after optimal chemical etching. Wet chemical etching is employed as the surface treatment method, using the same chemical etchant with varying conditions for the texturing process. The study compares temperature‐maintained chemical etching and without temperature maintenance. The chemicals used include HF + HNO3 + CH3COOH at temperatures of 50 °C and room temperature, with etching durations of 2, 5, 10, and 15 minutes, respectively. The as‐cut boron‐doped p‐type mc‐Si wafer grains are analyzed using UV‐vis spectroscopy, optical microscopy, Fourier transform infrared spectroscopy, thickness profilometry, scanning electron microscopy, and X‐ray diffraction spectroscopy, both before and after etching. Among the different conditions tested, the chemical etchant HF + HNO3 + CH3COOH at 50 °C for a 5‐minute etching duration yields favorable results, with reflectivity below 2%. The orientation of mc‐silicon wafer grains is determined using X‐ray diffraction spectroscopy.

Effect of Temperature and Particle Size on the Acid Leaching Process for Solar Grade Silicon Production

Comparative study on removal of metallurgical silicon impurities by different acid leaching methods

MD Simulation and Transport Property Analysis of Silicon in High-Temperature Molten Fluoride Salts Electrolyte

How particle sizes affect silver leaching from c-Si photovoltaic solar cells: Insights from integrated experimental and numerical investigations

A High-Efficiency and Energy-Saving Method for Purifying Industrial Silicon for Silicone Use

Effects of solidification rate on the leaching behavior of metallic impurities in metallurgical grade silicon

Influence of Iron, Aluminum, Calcium, Titanium and Vanadium Impurities Removal from Silicon Based on Cu-catalyzed Chemical Leaching

Influence of Silicon Size Distribution on Hydrochlorination Process of Solar-grade Silicon in Spouted Reactor via MP-PIC Approach

Purification of Diatomaceous Earth using Acid Leaching Process to Produce High Purity Silica for Solar-Grade Silicon

The effect of the temperature of heat treatment process and the concentration and duration of acid leaching on the size and crystallinity of nano-silica powders formed by the dissociation of natural diatom frustule

Understanding the Effects of Heat Transfer on the Purification of Metallurgical Silicon by Directional Solidification in Cast Furnaces

Hydrometallurgical purification of solar cell silicon scraps through chemical etching with HF-HNO3-H2SO4

Effects Of Applied Power On Temperature Of Electromagnetic Levitation Of Silicon And Silicon-Iron Droplets

Effects Of Electrolytic Parameters On The Deposition Of Boron At The Cathode During Molten Salt Electrolysis Of Silicon

Influence of Temperature on Acid‐Based Wet Chemical Texturization for Ultralow Optical Reflectance (<2%) of mc‐Si Wafer for PV Applications

Effects of H2O2, Cu(NO3)2 and HF temperatures on surface texturization of diamond-wire-sawn multicrystalline silicon wafer

Effect of Temperature on Dephosphorization of Ferrosilicon Using Electromagnetic Levitation Technology under Vacuum

Effects of HF Acid on Dissolution of Elemental Si

Ultrasonic-enhanced sulfuric acid leaching kinetics of high-grade germanium-containing materials

Experimental Research on Deep Silicon Removal in Spent SCR Catalysts

Thermodynamics analysis and experiments on Ti-bearing blast furnace slag leaching enhanced by sulfuric acid roasting