Abstract:In order to analytically solve crack problems regarding functionally graded materials (FGMs), some ideal assumptions are often made. They are: (1) the properties of FGMs are usually assumed to be described by very particular functions; (2) the crack is assumed to be vertical to (or parallel to) the gradient of FGMs. However, these assumptions may not be practical for actual FGMs. Since the controlling differential equations with general mechanical properties are very difficult to solve and the arbitrarily oriented crack causes great trouble in the analytical procedure, a general piecewise-exponential model (GPE model) is proposed to investigate the fracture behaviour of FGMs with general mechanical properties and an arbitrarily oriented crack. "General mechanical properties" means that the mechanical properties in the GPE model are not required to be very particularly pre-defined functions but arbitrary functions determined by fitting the experimental results of FGMs. The studied FGMs are divided into some sub-layers with each layer's properties varying exponentially so that the general mechanical properties can be approximated by a series of exponential functions and hence the stresses and displacements of each layer which may contain a mixed-mode crack can be solved analytically. By use of integral transform methods, principle of superposition, residual theorem and theory of singular integral equations, the mixed-mode crack problem can be turned into solving a group of singular integral equations from which mixed-mode stress intensity factors (SIFs) can be obtained. Finally, the influences of the nonhomogeneous and geometric parameters on the mixed-mode SIFs are analysed.

A mode-III fracture analysis of two collinear cracks in a functionally graded material using gradient elasticity theory

Investigation of Fracture Characterizations of Functionally Graded Materials

An analytical model for collinear cracks in functionally graded materials with general mechanical properties

Dynamic Caustic Analysis of a Propagating Mode-III Crack in Functionally Graded Material Based on a Higher-order Transient Crack Tip Expansion

Strain Gradient Fracture of a Mode III Crack in an Elastic Layer on a Substrate

Phase field modelling of crack propagation in functionally graded materials

Numerical Investigation on the Fracture Behaviors of Three-Dimensional Functionally Graded Materials

Strain Gradient Fracture in an Anti-Plane Cracked Material Layer

A mode III moving crack between a functionally graded coating and a homogeneous substrate

Dynamic behavior of a finite crack in the functionally graded materials

Numerical Analysis of Stress Intensity Factors in Three-Dimensional Functionally Graded Materials

Crack Analyses of Functionally Graded Materials and Finite Element Method Calculation

The Nonlocal Solution of Two Parallel Cracks in Functionally Graded Materials Subjected to Harmonic Anti-Plane Shear Waves

Transient thermoelastic responses of functionally graded materials containing collinear cracks

A General Modelling Method for Functionally Graded Materials with an Arbitrarily Oriented Crack

Fracture Analysis of A Viscoelastic Functionally Graded Materials Strip with A Central Crack

Investigation of A Mode Iii Crack in Functionally Graded Magnetoelectroelastic Materials

Fracture mechanics analysis of functionally graded layered structures with a crack crossing the interface

A Fracture Mechanics Model for an Arbitrarily Oriented Crack in Functionally Graded Materials

A Mode III Interface Crack with Surface Strain Gradient Elasticity

Investigation into the Dynamic Fracture Properties of Large Scale Functionally Graded Materials