Abstract:Wheel–rail adhesion is a complex tribological problem of wheel–rail rolling contact and is closely related to the operational safety of high-speed trains. A new design concept of high-speed trains was recently proposed with an expectation of a reduction of equivalent weight and total energy consumption by installing aerodynamic wings (aero-wings) on the roof, but it was accompanied by the disadvantage of deteriorating wheel–rail adhesion performance. In this study, a comprehensive multi-body dynamics (MBD) model of the high-speed train with predesigned aero-wings is established using the commercial software SIMPACK, in which the real aerodynamic characteristics of the train are taken into account. The available adhesion and adhesion margin are employed to evaluate the wheel–rail adhesion performance. The influences of aero-wing lift, train speed, and contact conditions on the wheel–rail adhesion level are discussed. The results show that the load transfer caused by the action of aerodynamic load and braking torque was the main reason for the inconsistent adhesion condition of four wheelsets. The influences of aero-wing lift and train speed on the wheel–rail adhesion performance are coupled; the available adhesion of both motor car and trailer is negatively correlated with aero-wing lift and train speed under all contact conditions, while the variation law of adhesion margin with train speed shows differences under different contact conditions. When the wheel–rail interface was polluted by a 'third-body medium' such as water and oil, the wheel–rail adhesion performance was dramatically reduced and the wheelset tended to reach adhesion saturation and slide. However, track irregularity had little effect on the adhesion performance and could be ignored to save calculation time. These results are of positive significance for reducing the wheel idling or sliding phenomenon and to ensure the safe operation of high-speed trains with aero-wings.

Introducing wheel-rail adhesion control into longitudinal train dynamics

Research on wheel-rail dynamic interaction of high-speed railway under low adhesion condition

Train energy simulation with locomotive adhesion model

A numerical study on locomotive wheel wear on curved track subjected to adhesion control

A transient three-dimensional wheel-rail adhesion model under wet condition considering starvation and surface roughness

Wheel-rail contact wear analysis on curved lubricated track for heavy haul locomotive studies

Explicit finite element simulations of dynamic low adhesion behavior between wheel and rail in the presence of high-frequency vibrations

Non-Hertzian contact analysis of heavy-haul locomotive wheel/rail dynamic interactions under changeable friction conditions

Investigating the stick-slip vibration behavior of a locomotive with adhesion control in a curve

Integrated Model Predictive Control of High-Speed Railway Running Gears with Driven Independently Rotating Wheels

Numerical and experimental investigation of the wheel/rail interaction and dynamics for a high-speed gauge-changeable railway vehicle

Wheel/rail adhesion and analysis by using full scale roller rig

Investigating the effect of rail profile deviation on hunting instability of high-speed railway vehicle under multi-parameter coupling

Explicit Dynamics Simulation of High-Speed Railway Bearing Based On ANSYS/LS-DYNA

Assessing the fast non-Hertzian methods for wheel-rail rolling contact integrated in the vehicle dynamics simulation

Impact of wheel profile evolution on the lateral motion characteristics of a high-speed vehicle navigating through turnout

A novel approach for longitudinal train dynamics simulations with multibody codes

Numerical study of wheel–rail adhesion performance of new-concept high-speed trains with aerodynamic wings

Effect of gauge corner lubrication on wheel/rail non-Hertzian contact and rail surface damage on the curves

Theoretical modelling of a vehicle-slab track coupled dynamics system considering longitudinal vibrations and interface interactions

Research on the Identification of Nonlinear Wheel–Rail Adhesion Characteristics Model Parameters in Electric Traction System Based on the Improved TLBO Algorithm