Abstract:In the 5G era, for portable electronics to operate at high performance and low power levels, the incorporation of superior electromagnetic interference (EMI) shielding materials within the packages is of critical importance. A desirable wearable EMI shielding material is one that is lightweight, structurally flexible, air-permeable, and able to self-clean. To this end, a bioinspired electroless silver plating strategy and a one-step electrodeposition method are utilized to prepare an EMI shielding fabric (CEF-NF/PDA/Ag/50-30) that possesses these desirable properties. Porous CEF-NF mats with a spatially distributed silver coating create efficient pathways for electron movement and enable a remarkable conductivity of 370 S mm–1. When tested within a frequency range of 8.2–12.4 GHz, this highly conductive fabric not only achieves an EMI shielding effectiveness (EMI SE of 101.27 dB at 5028 dB cm2 g–1) comparable to a very thin and light metal but also retains the unique properties of fabrics—being light, structurally flexible, and breathable. In addition, it exhibits a high contact angle (CA) of 156.4° with reversible surface wettability. After having been subjected to 1000 cycles of bending, the performance of the fabric only decreases minimally. This strategy potentially provides a novel way to design and manufacture an easily integrated EMI shielding fabric for flexible wearable devices.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c08868?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c08868</a>.Manufacturing process of a CEF-NF; composition and configuration of electroless silver plating solution; calculation methods and principles of SET, SER, SEA, and SEM; crank slider mechanism; cross-sectional SEM images of the CEF-NF and CEF-NF/PDA, CEF-NF/PDA/Ag-X, and CEF-NF/PDA/Ag/Y-Z fabrics; verification of Ce4+ ions; XRD patterns of the CF, ESF, and CEF-NF and CEF-NF/PDA, CEF-NF/PDA/Ag-4 × 30, and CEF-NF/PDA/Ag/50-30 fabrics; FTIR spectra of the CEF-NF and CEF-NF/PDA, CEF-NF/PDA/Ag-4 × 30, and CEF-NF/PDA/Ag/50-30 fabrics; EMI SE of each fabric corresponding to the silver layer thickness; corresponding relationship between shielding effectiveness and shielding efficiency; comparison of EMI SE between CEF-NF/PDA/Ag-120 and ESF/PDA/Ag-120 fabrics; comparison of EMI shielding performance of several typical materials; surface roughness, apparent density, thickness, and relative compositions (CEF-NF, PDA, Ag, and cerium myristate) of the CEF-NF and CEF-NF/PDA, CEF-NF/PDA/Ag-X, and CEF-NF/PDA/Ag/Y-Z fabrics; tensile properties of the CEF-NF, CEF-NF/PDA/Ag-X fabrics, and CEF-NF/PDA/Ag/Y-Z fabrics; and time-dependent changes of the electrical conductivity of CEF-NF/PDA/Ag-4 × 30 and CEF-NF/PDA/Ag/50-30 fabrics (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c08868/suppl_file/am0c08868_si_001.pdf">PDF</a>)Experimental phenomenon during one-step electrodeposition (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c08868/suppl_file/am0c08868_si_002.mp4">MP4</a>)Bounce of droplets on a CEF-NF/PDA/Ag/50-30 fabric (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c08868/suppl_file/am0c08868_si_003.mp4">MP4</a>)Returned pre-wetting state of the CEF-NF/PDA/Ag/50-30 fabric after drying (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c08868/suppl_file/am0c08868_si_004.mp4">MP4</a>)This article has not yet been cited by other publications.

Supersonically Sprayed Washable, Wearable, Stretchable, Hydrophobic, and Antibacterial rGO/AgNW Fabric for Multifunctional Sensors and Supercapacitors

Wearable Gas/strain Sensors Based on Reduced Graphene Oxide/linen Fabrics

Wearable fabric supercapacitors using supersonically sprayed reduced graphene and tin oxide

Flexible, superhydrophobic, and self-cleaning rGO/LDH/PPy-modified fabric for full X-band electromagnetic wave absorption

AgNWs/MXene derived multifunctional knitted fabric capable of high electrothermal conversion efficiency, large strain and temperature sensing, and EMI shielding

Superhydrophobic and conductive polydimethylsiloxane/titanium dioxide@reduced graphene oxide coated cotton fabric for human motion detection

CNT–rGO Hydrogel-Integrated Fabric Composite Synthesized via an Interfacial Gelation Process for Wearable Supercapacitor Electrodes

Multifunctional and Ultrasensitive-Reduced Graphene Oxide and Pen Ink/Polyvinyl Alcohol-Decorated Modal/Spandex Fabric for High-Performance Wearable Sensors.

Wearable Cellulosic Textile Electrodes with High Washability Based on Silver Nanowires to Capture Electrocardiogram

Facile Construction of a Superhydrophobic Surface on a Textile with Excellent Electrical Conductivity and Stretchability

pH tunable multifunctional cotton fabric with GO-PANI-Ag composite coating

Preparation of Flexible Carbon Fiber Fabrics with Adjustable Surface Wettability for High-Efficiency Electromagnetic Interference Shielding

Graphene-Based Flexible and Eco-Friendly Wearable Electronics and Humidity Sensors

Highly Durable and Fast Response Fabric Strain Sensor for Movement Monitoring Under Extreme Conditions

Coating Cellulosic Material with Ag Nanowires to Fabricate Wearable IR-Reflective Device for Personal Thermal Management: The Role of Coating Method and Loading Level

Ultrastretchable and Washable Conductive Microtextiles by Coassembly of Silver Nanowires and Elastomeric Microfibers for Epidermal Human–Machine Interfaces

Fabrication of superhydrophobic conductive film at air/water interface for flexible and wearable sensors

Textile-based supercapacitors for flexible and wearable electronic applications

Breathable and wearable graphene/waterborne polyurethane coated regenerated polyethylene terephthalate fabrics for motion sensing and thermal therapy

Multifunctional Sodium Alginate Fabric Based on Reduced Graphene Oxide and Polypyrrole for Wearable Closed-Loop Point-of-care Application

Polyacrylamide–Poly(vinyl Alcohol)–sodium Alginate–Reduced Graphene Oxide/Nylon Fabrics with Multistimuli Responses