Abstract:Lithium-rich transition metal oxides are considered a promising cathodic solutions in Li-ion batteries to meet the growing energetic demand, thanks to their high specific capacity and operational voltage [1-2]. Li-rich layered materials have a general stoichiometry Li1+xTM1-xO2, in which TM is a blend of transition metals, as Ni, Mn, Co [2]. They stand out due to their high lithium concentration and specific capacity [1-2]. The higher capacity of Lithium-Rich can be attributed to the specific anionic redox reaction in the bulk at above 4.5 V. Nevertheless, large irreversible capacity loss in the first cycle, poor rate capability, mean working potential decay upon cycling and cobalt content are still major drawbacks that are hindering commercialization. In order to make these materials up scalable to industrial production, it is important to consider the reduction of costs and the toxicity of raw materials, in particular cobalt. Cobalt reduction has been identified as major driver to improve the environmental benignity of batteries and the sustainability of the overall production-consumption-recycling lifecycle. Several efforts to reduce these problems have been made, including the development of different synthetic strategies, doping and surface modification. The most, widely explored, chemical strategy to mitigate the voltage decay and structural degradation in Lithium Rich cathodes is the doping. Elemental doping can be divided into cation and anion doping. As an example, incorporation of redox inactive metals, such as Al, Zr, Ti, has been proposed in order to stabilize the lattice as well as the partial replacement of lithium ions with other alkali cations, e.g. K and Na; or doping the oxygen anion sublattice. In this communication, we present our doping approaches. In particular, the simultaneous replacement of cobalt in the layered structure with aluminum and lithium (over-lithiation). Moreover, we present over-lithiated Co-free materials where the introduction of different amount of iron has been investigated. The characterization of these novel layered materials is reported in terms of composition, structure, morphology and electrochemical performances. These approaches can be applied as a strategy to mitigate the voltage decay and reduce the Cobalt content. [1] Ji, X. et al. Journal of Power Sources 487, (2021). [2] Zhao, S. et al. Angewandte Chemie - International Edition 60, 2208–2220 (2021).

Hierarchical Defect Engineering for LiCoO2 through Low-Solubility Trace Element Doping

Controlling the Microstructure of Cobalt-Free, High-Nickel Cathode Materials with Dopant Solubility for Lithium-Ion Batteries

Mitigation of Cation Mixing of LiNiO2-based Cathode Materials by Li-doping for High-Performing Lithium-Ion Battery

Mitigating Lattice Distortion of High-Voltage LiCoO2 via Core-Shell Structure Induced by Cationic Heterogeneous Co-Doping for Lithium-Ion Batteries

Hierarchical Doping Engineering with Active/Inert Dual Elements Stabilizes LiCoO2 to 4.6 V

Constructing uniform oxygen defect engineering on primary particle level for high-stability lithium-rich cathode materials

Co-gradient Li-rich cathode relieving the capacity decay in Lithium-ion batteries

Simultaneous Enhancement of Interfacial Stability and Kinetics of Single-Crystal LiNi0.6Mn0.2Co0.2O2 Through Optimized Surface Coating and Doping

Hierarchical Linixcoyo2 Mesostructures As High-Performance Cathode Materials for Lithium Ion Batteries

Doping Strategy to Improve the Electrochemical Behavior of Lithium Rich Transition Metal Oxides As Cathodes for Lithium-Ion Batteries

Synergistic Engineering of Defects and Architecture in a Co@Co3O4@N-CNT Nanocage toward Li-Ion Batteries and HER

Structure/Interface Coupling Effect for High‐Voltage LiCoO2 Cathodes

Structure/Interface Coupling Effect for High‐Voltage LiCoO<sub>2</sub> Cathodes

Engineering Hierarchical CoO Nanospheres Wrapped by Graphene via Controllable Sulfur Doping for Superior Li Ion Storage

Mitigating Evolution of Lattice Oxygen and Stabilizing Structure of Lithium-Rich Oxides by Fabricating Surface Oxygen Defects

Composite Nanostructure Construction on the Grain Surface of Li‐Rich Layered Oxides

Structure/Interface Coupling Effect for High‐Voltage LiCoO2 Cathode

Cobalt-free composite-structured cathodes with lithium-stoichiometry control for sustainable lithium-ion batteries

Enhanced Interfacial Kinetics and High Rate Performance of LiCoO2 Thin-Film Electrodes by Al Doping and in Situ Al2O3 Coating.

Ti‐Gradient Doping to Stabilize Layered Surface Structure for High Performance High‐Ni Oxide Cathode of Li‐Ion Battery

Selective dopant segregation modulates mesoscale reaction kinetics in layered transition metal oxide