Abstract:<p>Commercial lithium-ion batteries still undergo safety concerns due to using perilous and flammable liquid electrolytes that are prone to fire and leakage issues. Meanwhile, the development of high energy density lithium-metal batteries with conventional liquid electrolytes has also encountered bottlenecks because of the growth of lithium-dendrites and parasitic reactions. Therefore, the use of flammable liquid electrolytes in lithium batteries is the main obstacle to be overcome, and at the same time, the contradiction between high energy density and high safety for practical applications needs to be addressed. Currently, solid polymer electrolyte has been considered as a promising solution, and hence solid polymer-based lithium batteries have attracted much attention due to their high safety compared to their counterparts. However, its low ionic conductivity, poor mechanical properties, and insufficient cycle life restrict their practical applications. At present, there are fewer comprehensive reviews available on lithium batteries based on polymer electrolyte systems, so it is substantial worthy of summarizing the existing literature and timely apprises of incessantly improving strategies of this field. This review summarizes the ion transfer mechanism and performance requirements of polymer electrolytes for lithium batteries, the classification and design of polymer electrolytes, and the essential principles and characterization for electrode/electrolyte interface construction and the research of composite electrolyte. Finally, the current status and development prospects of polymer electrolytes are briefly summarized and discussed, enabling a foundation for the wide application of solid polymer electrolyte-based batteries.</p>

What problem does this paper attempt to address?

The paper primarily explores the application of polymer electrolytes in solid-state lithium-ion batteries and the challenges they face. Specifically, the paper attempts to address the following key issues: 1. **Safety Issues**: Traditional liquid electrolyte lithium batteries are prone to flammability and leakage, which limits their large-scale application. Therefore, the study of solid-state electrolytes (especially polymer electrolytes) aims to improve battery safety. 2. **Energy Density Issues**: The energy density of liquid electrolyte lithium batteries has approached a bottleneck, making it difficult to meet the demand for high-energy-density batteries. Polymer electrolytes can be used in conjunction with lithium metal anodes, significantly enhancing the battery's energy density. 3. **Lithium Dendrite Issues**: Liquid electrolytes easily lead to the growth of lithium dendrites, which can pierce the separator and cause short circuits. Polymer electrolytes can effectively slow down the growth of lithium dendrites, reducing the risk of short circuits. 4. **Mechanical Performance Issues**: Ideal solid-state polymer electrolytes need to have good mechanical strength and a certain degree of flexibility to inhibit the growth of metal dendrites and buffer the volume changes of electrodes, ensuring good contact between the electrodes and the electrolyte during charge and discharge cycles. 5. **Ionic Conductivity Issues**: Currently, most polymer electrolytes have low ionic conductivity. It is necessary to improve ionic conductivity by increasing the dissociation ability of lithium salts and reducing the crystallinity of the polymer matrix. In summary, this paper aims to comprehensively summarize and evaluate the research progress of polymer electrolytes in solid-state lithium-ion batteries, discuss the challenges they face in practical applications, and propose improvement strategies to promote the widespread application of solid-state polymer electrolytes in the field of lithium batteries.

Reviewing the current status and development of polymer electrolytes for solid-state lithium batteries

Incombustible Polymer Electrolyte Boosting Safety of Solid‐State Lithium Batteries: A Review

Polymer electrolytes and interfaces in solid-state lithium metal batteries

A review of solid-state lithium metal batteries through in-situ solidification

A comprehensive review of single ion-conducting polymer electrolytes as a key component of lithium metal batteries: From structural design to applications

Polymeric Electrolytes for Solid‐state Lithium Ion Batteries: Structure Design, Electrochemical Properties and Cell Performances

Key issues and modification strategies towards high-performance polymer all-solid-state lithium-sulfur batteries

Polymer-based electrolytes for all-solid-state lithium–sulfur batteries: from fundamental research to performance improvement

Flame-retarding quasi-solid polymer electrolytes for high-safety lithium metal batteries

Research Progresses of in Situ Polymerized Electrolytes for Solid-state Lithium Metal Batteries

In‐situ polymerized solid/quasi‐solid polymer electrolyte for lithium‐metal batteries: recent progress and perspectives

Review—In Situ Polymerization for Integration and Interfacial Protection Towards Solid State Lithium Batteries

Review of ionic liquids containing, polymer/inorganic hybrid electrolytes for lithium metal batteries

Recent Progress of Polymer Electrolytes for Solid-State Lithium Batteries

Solid-state polymer electrolytes in lithium batteries: latest progress and perspective

Designing polymer electrolytes for advanced solid lithium-ion batteries: Recent advances and future perspectives

Polymer electrolyte design strategies for high-performance and safe lithium-ion batteries: Recent developments and future prospects

Recent Advances in Porous Polymers for Solid-State Rechargeable Lithium Batteries

Applications of Polymer Electrolytes in Lithium-Ion Batteries: A Review

Recent advances of newly designed in-situ polymerized electrolyte for high energy density/safe solid Li metal batteries

Progress in Solid Polymer Electrolytes for Lithium‐Ion Batteries and Beyond