Abstract:Magnetically actuated microrobot in a liquid media is faced with the problem of head-tilting reaction caused by its hydrodynamic structure and its speed while moving horizontally. When the instance microrobot starts a lateral motion, the drag force acting on it increases. Thus, the microrobot is unable to move parallel to the surface due to the existence of drag force that cannot be neglected, particularly at high speeds such as >5 mm/s. The effect of it scales exponentially at different speeds and the head-tilting angle of the microrobot changes relative to the reference surface. To the best of our knowledge, there is no prior study on this problem, and no solution has been proposed so far. In this study, we developed and experimented with 3 control models to stabilize microrobot motion characteristics in liquid media to achieve accurate lateral locomotion. The microrobot moves in an untethered manner, and its localization is carried out by a neodymium magnet (grade N48) placed inside its polymer body. This permanent magnet is called a carrier-magnet. The fabricated microrobot is levitated diamagnetically using a pyrolytic graphite placed under it and an external permanent magnet, called a lifter-magnet (grade N48), aligned above it. The lifter-magnet is attached to a servo motor mechanism which can control carrier-magnet orientation along with roll and pitch axes. Controlling the angle of this servo motor, together with the lifter-magnet, allowed us to cope with the head-tilting reaction instantly. Based on the finite element method (FEM), analyses that were designed according to this experimental setup, the equations giving the relation of microrobot speed with servo motor angle along with the microrobot head-tilting angle with servo motor angle, were derived. The control inputs were obtained by COMSOL® (version 5.3, COMSOL Inc., Stockholm, Sweden). Using these derived equations, the rule-based model, laser model, and hybrid model techniques were proposed in this study to decrease the head-tilting angle. Motion control algorithms were applied in di-ionized water medium. According to the results for these 3 control strategies, at higher speeds (>5 mm/s) and 5 mm horizontal motion trajectory, the average head-tilting angle was reduced to 2.7° with the ruled-based model, 1.1° with the laser model, and 0.7° with the hybrid model.

Belousov-Zhabotinsky liquid marbles in robot control

Liquid Marble Photosensor

Controlled Actuation of Liquid Marbles on a Dielectric.

Electrocoalescence of liquid marbles driven by embedded electrodes for triggering bioreactions

Progress in Liquid Marbles

Belousov-Zhabotinsky reaction in liquid marbles

Liquid Marble Coalescence and Triggered Microreaction Driven by Acoustic Levitation

Switchable Opening and Closing of a Liquid Marble via Ultrasonic Levitation

Reciprocating Oscillation of a Floating Ferrofluid Marble Triggered by Magnetic Fields

Magnetic Liquid Marbles: A “Precise” Miniature Reactor

Liquid metal droplet motion transferred from an alkaline solution by a robot arm

Fabrication of Stable Monolayer Liquid Marbles with Reduced Particle Coverage and Locomotion on Hydrophilic Surface

NIR light-steered magnetic liquid marbles with switchable positive/negative phototaxis

Stabilization of Microrobot Motion Characteristics in Liquid Media

Neuromorphic Liquid Marbles With Aqueous Carbon Nanotube Cores

Magnetically Controllable Liquid Metal Marbles

A Liquid Metal Robot Driven by Hybrid-Fluid

Versatile Movements of Liquid Metal Droplet under Electrostatic Actuation in Alkaline Solutions

Closed Loop Control of Bubble-Propelled Microrobots

Multimodal Autonomous Locomotion of Liquid Crystal Elastomer Soft Robot

Unconventional Locomotion of Liquid Metal Droplets Driven by Magnetic Fields.