Abstract:This paper discusses the design of a 10 kV and 200 A hybrid dc circuit breaker suitable for the protection of the dc power systems in electric ships. The proposed hybrid dc circuit breaker employs a Thompson coil based ultrafast mechanical switch (MS) with the assistance of two additional solid-state power devices. A low- voltage (80 V) metal-oxidesemiconductor field-effect transistors (MOSFETs)-based commutating switch (CS) is series connected with the MS to realize the zero current turn-OFF of the MS. In this way, the arcing issue with the MS is avoided. A 15 kV SiC emitter turn-OFF thyristor-based main breaker (MB) is parallel connected with the MS and CS branch to interrupt the fault current. A stack of MOVs parallel with the MB are used to clamp the voltage across the hybrid dc circuit breaker during interruption. This paper focuses on the electronic parts of the hybrid dc circuit breaker, and a companion paper will elucidate the principle and operation of the fast acting MS and the overall operation of the hybrid dc circuit breaker. The selection and design of both the high-voltage and low- voltage electronic components in the hybrid dc circuit breaker are presented in this paper. The turn-OFF capability of the MB with and without snubber circuit is experimentally tested, validating its suitability for the hybrid dc circuit breaker application. The CSs' conduction performances are tested up to 200 A, and its current commutating during fault current interruption is also analyzed. Finally, the hybrid dc circuit breaker demonstrated a fast current interruption within 2 ms at 7 kV and 100 A.

Design and characterisation of the high‐current DC breaker driven by explosive

Preliminary study on electrical wire explosion utilized in pyro-breaker

A Novel High-Power Hybrid DC Breaker Based on Compound Power Electronic Switch With Integrated Commutation Ability

The Design and Development of a Novel 10 Kv/60 Ka Hybrid DC Circuit Breaker Based on Mixed Solid-State Switches

A Medium-Voltage Hybrid DC Circuit Breaker, Part I: Solid-State Main Breaker Based on 15 Kv SiC Emitter Turn-OFF Thyristor

Design and Analysis of a 375v/5ka Solid State DC Circuit Breaker Based on IGCT

Research on the airflow field and interruption performance of 550 kV fast circuit breaker

Analysis and Design of the High Current Rising Rate Hybrid DC Current Limiting Circuit Breaker

A Fast LVDC Vacuum Hybrid Circuit Breaker: Dielectric Recovery and Design Consideration

A Shock-Induced Pulsed Power Switch Utilizing Electro-Explosion of Exploding Bridge Wire

A State-of-the-Art 500-Kv Hybrid Circuit Breaker for a Dc Grid: the World's Largest Capacity High-Voltage Dc Circuit Breaker

A fuse‐based DC circuit breaker with vacuum interrupter enhanced by an external transverse magnetic field

Interrupting Process Simulation of HCSR Based 252 kV、85 kA Large Capacity Short-Circuit Current Breaking Device

Development and Application of a 10 Kv Mechanical DC Circuit Breaker

Design and Test of the Bidirectional Solid-State Switch for an 160kv/9ka Hybrid DC Circuit Breaker

Application of arc breaking simulation in development of extra high voltage SF<sub>6</sub> circuit breaker

Principle Analysis and Parameter Design of Resonant-Current-Assisted Arcless Soft Switching DC Circuit Breaker

A DC Combined Apparatus for DC 1.5 Kv Rail Transit Traction Systems

An Integrated Multichips Package Module With 30 kA Turn-Off Capability Based on Pulse Oscillation for Hybrid Circuit Breaker

A Multi-Break Mechanical Switch Applicable for Medium Voltage Natural Commutation DC Circuit Breakers

A Novel Oscillating-Commutation Solid-State DC Breaker Based on Compound IGCTs