Abstract:BACKGROUND AND OBJECTIVE: The methods proposed in literature to estimate the position of hand joints Centers of Rotation (CoRs) typically require computationally non-trivial optimization routines and exploit a high number of markers to calculate CoRs positions from surface marker trajectories. Moreover, most of the existing works evaluated the accuracy only in simulation. This work proposes a new procedure, based on the Pratt circle fit, to estimate joints CoRs position in 2D through marker-based acquisitions.METHODS: The advantage of the Pratt circle fit lies in its simplicity and computational speed, and in the possibility of exploiting a reduced markerset for calculating CoRs. By applying simplifying assumptions regarding the movement of the fingers (i.e., planar and decoupled flexion-extension movements of each joint occurring in the same flexion plane for all the joints of the finger), it is possible to determine the position of the CoR of each joint in 2D. For this reason, the estimation of the Carpo-MetaCarpal joint of the thumb was not included in this work, as it exhibits a more complex movement associated to the combination of a flexion-extension and adduction-abduction degree of freedom. The errors in estimating CoRs were evaluated by conducting experimental acquisitions on an anthropomorphic robotic hand and comparing the position of the estimated CoR with the real position of the CoR. The repeatability of the method and its capability to estimate anatomically plausible CoRs were evaluated through experimental acquisitions conducted on five healthy volunteers.RESULTS: Errors in estimating finger joints CoRs were in the order of 0.70 mm and 0.18 mm respectively along the finger longitudinal direction (i.e., x coordinate) and thickness (i.e., y coordinate). Standard Deviations of CoRs positions were comparable to the ones obtained in literature (i.e., below 2 mm and 1 mm respectively for the x and y coordinates), thus demonstrating the repeatability of the method. The Anatomical Plausibility Rate of the proposed approach was between 80% and 100%.CONCLUSIONS: The performance of the Pratt-based CoRs estimation procedure proposed in this work was comparable to other existing methods, with the advantage of exploiting a simple fitting algorithm and a reduced markerset with respect to the state-of-the-art techniques.

A marker-based approach to determine the centers of rotation of finger joints

Identify Finger Rotation Angles With ArUco Markers and Action Cameras

Experimental investigation on the centros of abduction/adduction of the metacarpophalangeal joints of human hand

The Joint-Space Reconstruction of Human Fingers by Using a Highly Under-Actuated Exoskeleton

Estimation of Contact Regions Between Hands and Objects During Human Multi-Digit Grasping

Comparison of Modelling and Tracking Methods for Analysing Elbow and Forearm Kinematics

A novel functional calibration method for real-time elbow joint angles estimation with magnetic-inertial sensors

Joint Parameter Estimation Using Magneto and Inertial Measurement Units

Improved Estimation of Elbow Flexion Angle from IMU Measurements Using Anatomical Constraints

Using Virtual Markers To Explore Kinematics Of Articular Bearing Surfaces Of Knee Joints

The passive biomechanics of the thumb carpometacarpal joint: An in vitro study

Real Time Human Motion Compensation Based On Joint Dof Constraints For Upper Limb Soft Tissue Artefacts

Quantitative Analysis of Finger Motion Coordination in Hand Manipulative and Gestic Acts.

An efficient procedure for locating joint centers on 3D scanned human models: using hip joint centers as an example

An Improved Calibration Method of EMG-driven Musculoskeletal Model for Estimating Wrist Joint Angles.

A Kind of Precise and Efficient Algorithm on Judging the Center of Joint Rotation

Minimal detectable difference of the finger and wrist range of motion: comparison of goniometry and 3D motion analysis

Estimation of joint contact pressure in the index finger using a hybrid finite element musculoskeletal approach

Novel IMU-based Adaptive Estimator of the Center of Rotation of Joints for Movement Analysis

Unconstrained Kinematic MRI Tracking of Wrist Carpal Bones

Interactive Hand Pose Estimation: Boosting accuracy in localizing extended finger joints