Abstract:Temperature distribution of the 220 kV cable layers in flat formation and its surrounding soil when using cross‐linked polyethylene (XLPE)/ZnO 5 wt.% nano‐composite for cable insulation and polyvinyl chloride (PVC)/SiO2 1 wt.% nano‐composite for cable jacket for: (A) wet sand soil and (B) wet clay soil. In most underground power cables, cross‐linked polyethylene (XLPE) is utilized as the main insulating material, while polyvinyl chloride (PVC) is usually used as a nonmetallic sheath or jacketing for the cable. Accordingly, improving the electrical and thermal characteristics of these materials leads to an increase in cable dielectric strength, besides a rise in the current capacity of the underground power cables. Thus, enhancing the thermal characteristics of cable insulation is the goal of many research studies. In this regard, increasing the current capacity of underground power cables is an essential topic for electrical distribution and transmission networks. This usually occurs by increasing the cross‐sectional area of the cable conductor, which means raising the cost of transmitting electrical energy. Another proposed alternative may be to improve the thermal properties of the dielectric material using nanotechnology to allow better dissipation of heat resulting from the cable losses. This article proposes the use of nano‐composite dielectrics to increase the current capacities of underground power cables. Nano‐fillers are used to enhance the thermal and electrical characteristics of XLPE and PVC, which represent cable dielectric materials. Accordingly, in this paper, many experiments are conducted on various nano‐dielectric materials to choose the most appropriate nano‐dielectrics for improving both the thermal and electrical properties. Hence, measurements are performed on the thermal and electrical properties of dielectric nano‐materials manufactured in the laboratory. Further, calculations of the cable's current capacities by the use of the measured properties of nano‐dielectrics are done considering several backfill soils. From the obtained measurements and calculations carried out on cable capacities, it is concluded that the use of XLPE/ZnO 5 wt.% as the insulation and PVC/ZnO 5 wt.% as the jacket material increased the cable current capacity by 6.2% for a cable of 33 kV rating, 9.2% for 66 kV cable, and 15.7% for 220 kV cable when wet clay is used as backfill soil. From the calculations carried out it is found that the use of nano‐composite dielectrics reduces the temperature of the cable components by significant values. For example, the core temperature of the 33 kV cable is reduced by 15.6°C, while for the 66 kV cable, the cable core temperature is decreased by 12.6°C, and for 220 kV the conductor temperature is reduced from 71.3°C to 58.3°C when each cable is loaded by its rating.

Exploring the potential of CuO nanoneedles and CNT/PVC nanocomposites in medium voltage cable technology

Enhancing the performance of optoelectronic potential of CuO/Al nanoplats in a PVC for medium voltage cables applications

Electrical Insulation Performance of Cross‐linked Polyethylene/mgo Nanocomposite Material for ±320 Kv High‐voltage Direct‐current Cables

PVC nanocomposites for cable insulation with enhanced dielectric properties, partial discharge resistance and mechanical performance

Tailoring Electrical Properties of PVC/PEC/Co 3 O 4 Nanocomposites by Electron Beam Irradiation for Advanced Medium Voltage Cable Applications

The influence of silane-grafted aluminum oxide nanoparticles on the interfacial interaction phase and electric performance of polyvinyl chloride-based nanocomposite

Enhancement of the underground cable current capacity by using nano‐dielectrics

Tailoring the optical and dielectric properties of PVC/CuO nanocomposites

Tailoring the linear and nonlinear optical properties of PVC/PE blend polymer by insertion the spindle copper nanoparticles

Improving the distribution system capability by incorporating ZnO nanoparticles into high-density polyethylene cable materials

Polypropylene‐based nanocomposites for HVDC cable insulation

Highly conductive polymer nanocomposites for emerging high voltage power cable shields: experiment, simulation and applications

Polypropylene nanocomposites doped with carbon nanohorns for high-voltage power cable insulation applications

Effect of Different Nanoparticles on Tuning Electrical Properties of Polypropylene Nanocomposites

Effect of Multi-Dimensional Zinc Oxide on Electrical Properties of Polypropylene Nanocomposites for HVDC Cables

The Dielectric Properties Improvement of Cable Insulation Layer by Different Morphology Nanoparticles Doping into LDPE

Nanocomposites Based on Magnesium-oxide/ Aluminum-Nitride/Polypropylene for HVDC Cable Insulation

Influence of Nanoparticle Surface Coating on Electrical Conductivity of Polyethylene/aluminium Oxide Nanocomposites for HVDC Cable Insulations

Highly insulating thermoplastic nanocomposites based on a polyolefin ternary blend for high-voltage direct current power cables

Influence of Nano-Doped LDPE Cable Insulating Materials on the Insulation and Thermal Conductivity Properties