Abstract:Soft robots have strong adaptive ability to unstructured environment due to their large deformation capacity.This type of robots can arbitrarily change their size and shape,and have wide potential applications in detection,succor,biology and medicine.Ionic electroactive polymers (EAPs) actuators are expected to be one of the most ideal driving mechanisms for soft robot due to their extraordinary features such as lightweight,flexibility and low-energy consumption.However,traditional EAP actuators e.g.ionic-polymer metal composites (IPMCs) have the defects of durability in open air due to evaporation of water contained in the electrolytes,resulting in corresponding performance reduction.In addition,electrolysis of the water at relatively low operating voltages may cause deterioration of these actuators.Ionic liquids are more thermally and electrochemically stable than water,with unique advantages including negligible volatility,low melting point and high ionic conductivity,and they are therefore can be used in the application of ionic EAP actuators.In this work,a novel ionogel based soft manipulator is developed,which can be operated at low driving voltage with high electrochemical stability.Aiming at the defects of traditional smart material (e.g IPMC),a high performance ionogel based actuator was developed based on UV curing technology,which can be easily extended to 3D printing technology for sophisticated actuators.This new actuator is composed of five layers of different materials.The electroactive component layer sandwiched is ionogel,with a thickness of approximately 0.4 mm,and serves as a reservoir for the ions.The outside layers of activated carbon are used as the electrodes with a thickness of about 0.05 mm.In order to increase the conductivity of the electrodes,gold foil with a thickness of 12 μm is coated on both sides of the component as capping layers.The design method of the soft mechanism is put forward according to screw theory.The degree of freedom and constraint of the soft mechanism can be obtained from compliance matrix.Therefore,an improved freedom and constraint topology (FACT) method is used to design the configuration of the soft robot.The deformation mechanism of the ionogel based actuator is analyzed based on Nernst-Planck model of ions migration in porous media and cantilever beam theory.A soft manipulator with three fingers is developed,which is consisted of one common electrode,three independent electrodes and ionogel based actuators.At last,experiments are carried out to validate the effectiveness of the ionogel based actuator and soft manipulator.The experimental results show that the proposed actuator has good actuation capability,which can work stable in open air for 300 s with square signal (amplitude 3 V,period 30 s,50％ duty circle).Moreover,the soft manipulator can capture the objective with a mass of 105 mg driven by 3.5 V direct voltage.As a proof of concept,we demonstrate that the ionogel based actuator has excellent performance and broad application prospects in robotics.In future,we will extend the proposed model to incorporate the material nonlinearities of the ionogel,including nonlinear viscoelasticity and hysteresis.And the output force of the actuator will also be analyzed in further study.

Enhanced actuation performance of multiple stimuli responsive PDMS-based bilayer actuators by adding ionic liquid

Biomimetic Soft Actuator: Rapid Response to Multiple Stimuli with Programmable Control

Thermal and light-driven soft actuators based on a conductive polypyrrole nanofibers integrated poly(N-isopropylacrylamide) hydrogel with intelligent response

High-Performance Nanocellulose-Based Ionic Electroactive Soft Actuators

Highly Bidirectional Bendable Actuator Engineered by LCST-UCST Bilayer Hydrogel with Enhanced Interface.

Bending and sensing performances of electro-ionic soft actuators based on carboxylated cellulose nanofibers reinforced with graphene nanoplatelets

Slot‐Die‐Printed Electroactive Polymer Actuators with High‐Strain Sensitivity for Soft Robotic Applications

Designing Multistimuli-Responsive Anisotropic Bilayer Hydrogel Actuators by Integrating LCST Phase Transition and Photochromic Isomerization

Flexible Actuators Based on Conductive Polymer Ionogels and Their Electromechanical Modeling

Dual Salt- and Thermo-Responsive Programmable Bilayer Hydrogel Actuators with Pseudo-Interpenetrating Double-Network Structures.

Graphene oxide and low-density polyethylene based highly sensitive biomimetic soft actuators powered by multiple clean energies of humidity and light

Smart Bionic Applications Based on a Multiple Stimulus Response GO-PDANP/PDMS Bilayer Flexible Actuator

Multi-stimuli responsive, shape deformation, and synergetic biomimetic actuator

Development of soft manipulator based on ionogel

Bilayer Hydrogel Actuators with High Mechanical Properties and Programmable Actuation via the Synergy of Double-Network and Synchronized Ultraviolet Polymerization Strategies

High-Performance Multiresponsive Bilayer Actuators Based on Micro-/Nanostructured Polypyrrole for Robust Smart Devices

High Performance Soft Electrochemical Actuators Based on Hierarchical Conductive Polymer Ionogels

Simultaneous Surface Covalent Bonding and Radical Polymerization for Constructing Robust Soft Actuators with Fast Underwater Response

Programmable and Bidirectional Bending of Soft Actuators Based on Janus Structure with Sticky Tough PAA-Clay Hydrogel.

Bioinspired bilayer hydrogel-based actuator with rapidly bidirectional actuation, programmable deformation and devisable functionality

Novel multi-responsive soft actuator assembled with a graphene oxide nanoribbons doped strain hydrogel sensor with high sensitive and NIR-triggered performances