Abstract:In order to achieve wide speed-range operation in traction applications, an investigation of a permanent magnet (PM) flux-modulated motor with a mechanical flux-weakening solution is presented in this article. This PM flux-modulated motor consists of two sets of windings, i.e., windings I and II, and two rotors, i.e., the outer rotor and the inner rotor. The two sets of windings are connected in series. By adjusting the inner rotor position, the phase angle between the two voltage vectors of windings I and II is accordingly changed. Hence, with the speed increasing, even though the magnitudes of the two voltage vectors of windings I and II are increased, the voltage magnitude of the total series-connected windings can be maintained (instead of increased) within the voltage limit. As a result, a mechanical flux-weakening solution for wide speed-range operation is achieved. Differing from conventional electrical flux-weakening solutions, this mechanical solution shows the advantage that the flux-weakening capability is not heavily dependent on the power rating of the motor. A comparative study is conducted between the presented PM flux-modulated motor with the mechanical solution and a conventional interior PM synchronous motor (IPMSM) as well as a surface-mounted PM synchronous motor (SPMSM) with the electrical solution. The results indicate that compared to the IPMSM and SPMSM, the presented PM flux-modulated motor exhibits the advantages of high torque/power density, high torque per PM volume, and high flux-weakening capability. Finally, a prototype of the presented PM flux-modulated motor is fabricated, and experimental validation of the mechanical flux-weakening solution is provided.

A pole-changing flux reversal permanent magnet motor

Harmonic Analysis of Airgap Magnetic Fields in Doubly-Fed Flux Reversal Permanent Magnet Machines.

Performance Analysis of Asymmetric-Excited Flux Reversal Permanent Magnet Linear Machines

Novel Modular-Rotor Switched-Flux Permanent Magnet Machines

Winding Configurations and Pole/Tooth Combinations of Doubly-Fed Flux-Switching Permanent Magnet Machines

Pole-changing Field Modulation Permanent Magnet Motor based on Magnetomotive Force Offset

Comparative Analysis of Doubly Fed Flux-Reversal Permanent Magnet Machines with Different PM Arrangements and Consequent-Pole Topologies

Design and Optimization of Novel Doubly-Fed Consequent-Pole Flux Reversal Machine

Design and Analysis of a Novel Dual-PM Flux Reversal Machine for Electric Vehicle Propulsion

Design and Investigation of Flux-Reversal Permanent-Magnet Motor with Less Rare-Earth Magnet for Low-Cost Application

A Novel Doubly-Fed Flux-Switching Permanent Magnet Machine with Armature Windings Wound on Both Stator Poles and Rotor Teeth

Electronic Pole Changing Technique of Multi-Phase Induction Motor

Design Optimization with Outer Rotor Interior Permanent Magnet Synchronous Motor with Hybird Permanent Magnet

Analysis of a New Partitioned-primary Flux-reversal Hybrid-Excited Linear Motor

Design and analysis of a hybrid permanent magnet variable leakage flux motor for low core loss and wide speed range

Comparative Study of Biased Flux PM Machines Having Different Stator Core Segments and Armature Winding Configurations

Analysis of a Novel Double-Sided Yokeless Multitooth Linear Switched-Flux PM Motor

Investigation of a PM Flux-Modulated Motor With Mechanical Flux-Weakening Solution for Wide Speed-Range Operation in Traction Applications

Novel Fault-Tolerant Doubly Fed Flux Reversal Machine with Armature Windings Wound on Both Stator and Rotor Teeth

Novel Permanent Magnet Switching Flux Motors

New Dual-PM Spoke-Type Flux-Reversal Machines for Direct-Drive Applications