Abstract:Glassy polymers exhibit a strong thermomechanical coupling when subjected to mechanical loading. A homogeneous strain distribution can be achieved in uniaxial compression conditions. However, a clear temperature increase is observed when the loading rate is relatively high, which further results in a decrease in stress due to thermal softening. In tensile tests, necking instability can easily occur. A temperature change is accompanied by the nucleation and propagation of necked regions. In this work, we apply the effective temperature theory, which can capture the nonequilibrium structure evolution of amorphous polymers, to investigate the thermomechanical behavior of glassy polymers. We demonstrate that a finite element model based on the effective temperature theory can well capture the stress response and the temperature increase of polycarbonate (PC) compressed at different loading rates. We further combine experiments and simulations to investigate the effects of the loading rate and aging treatment on the necking behavior in amorphous glassy polymer poly(ethylene terephthalate)-glycol (PETG) in uniaxial tension loading tests. Through employing digital image correlation and infrared thermometry, the strain distribution and the temperature field can be fully characterized during the formation and propagation of necked regions. The model captures all important features of localization behavior observed in experiments, including the force–displacement relationship, and the strain and temperature distribution with necking propagation. However, it underestimates the maximum strain and temperature when the displacement is large. Both experimental and simulative results indicate that increasing loading rate and aging time can induce an increase of the intrinsic strain softening due to a more active structural state caused by mechanical rejuvenation. This further leads to more pronounced localized behavior and a ductile–brittle transition. Our work proves that the effective temperature model is a powerful theoretical framework to predict the complex thermomechanical response of glassy polymers.

A new perspective on the glass transition, tack and rheology of oligomeric epoxy resins

Effect of Monomer Structure on Crystallization and Glass Transition of Flexible Copolyesters

Glass Transition in Gels

A Finite Deformation Fractional Viscoplastic Model for the Glass Transition Behavior of Amorphous Polymers

Thermomechanical Coupling in Glassy Polymers: an Effective Temperature Theory

X-ray Scattering Study and Molecular Simulation of Glass Forming Liquids: Propylene Carbonate and Salol

Glass Transition Behavior of Wet Polymers.

Glass transition of an epoxy resin induced by temperature, pressure and chemical conversion: a configurational entropy rationale

Supramolecular structure of epoxy oligomers

Universality of Dynamic and Thermodynamic Behavior of Polymers near their Glass Transition

Molecular Dynamics Study of Cured ED-20 Epoxy Resin for Predicting the Glass Transition Temperature and Relationship with Structure Features

Linear and nonlinear mechanical properties of a series of epoxy resins

The Effect of Nonterminal Liquid Crystalline Epoxy Resin Structure and Curing Agents on the Glass Transition of Polymer Networks

A new approach for the interpretation of the dynamic and mechanical properties of polymer nanocomposites above and below the glass transition region

Data-driven identification and analysis of the glass transition in polymer melts

Temperature Dependence of Structural Relaxation in Glass-Forming Liquids and Polymers

Quantitatively Connecting Experimental Time-Temperature-Superposition-Breakdown of Polymers near the Glass Transition to Dynamic Heterogeneity via the Heterogeneous Rouse Model

Relative effects of polymer composition and sample preparation on glass dynamics

The thermo-optical coefficient as an alternative probe for the structural arrest of polymeric glass formers

Glass Transition Dependence of Ultrahigh Strain Rate Response in Amine Cured Epoxy Resins

Studies on the Modification of Commercial Bisphenol-A-Based Epoxy Resin Using Different Multifunctional Epoxy Systems