Abstract:Increasing demand for electrochemical energy storage devices with high energy density, high power density, and long lifespan has posed significant challenges for developing suitable electrodes and electrolyte systems with fast charge transport kinetics and superior cycling stability. 1 As one of the promising electrode materials explored recently, MXenes (M n+1 X n T x ) are a group of two-dimensional transition metal carbides and/or nitrides, in which M is early transition metal, X presents C and/or N, T x stands for the surface groups such as =O, -OH, -Cl or -F. They exhibit excellent high-rate performance in electrochemical energy storage applications due to their unique properties: superior electronic conductivity (~15 000 S cm -1 ) and large interlayer spacing (~1 nm). 2 The charge storage mechanism and performance of the MXenes electrode is highly dependent on the electrode and electrolyte composition. For example, Ti 3 C 2 T x has shown rapid pseudocapacitive (de)intercalation of protons and transformation between the oxygen surface groups (=O) and hydroxyl (-OH) groups in acidic aqueous electrolytes. 3,4 As a result, Ti 3 C 2 T x exhibits an ultrahigh volumetric capacitance of 1500 F cm -3 in H 2 SO 4 electrolyte. 5 In less corrosive neutral aqueous electrolytes, the cation intercalation is accompanied by negligible charge transfer, leading to ultrafast charge storage. 6 Consequently, a moderate capacitance with superior cycling stability is reported in neutral electrolytes compared to acidic electrolytes. In contrast to dilute aqueous electrolyte, which has a limited electrochemical stability window (ESW), the highly concentrated water-in-salt (WIS) electrolyte possesses a large ESW (∼3.0 V) owing to the depressed activity of free water. Besides, the unique solvation structure of WIS electrolyte induces a novel intercalation of fully-solvated Li + at positive potential and increases the capacitance of MXene. 7 As a result, WIS electrolyte helps overcome the drawback of the low energy density of MXene in neutral aqueous electrolytes. In our research, we explored the impact of MXene structure and a novel electrolyte system on the pseudocapacitive performance of MXene. The charge storage behavior of Ti 3 C 2 T x in a molecular crowding electrolyte was explored. Interestingly, Ti 3 C 2 T x displayed one pair of redox peaks with low polarization, differing from both dilute neutral aqueous electrolyte and WIS electrolyte, which may be attributed to the intercalation of Polyethylene glycol (PEG)-solvated Li + cluster. The in situ X-ray diffraction are employed to better understand the charge storage process. We also constructed a MXene/polymer heterostructure with enlarged interlayer spacing. The unique heterostructure delivered a significantly enhanced rate performance in neutral aqueous electrolyte. (a high capacitance retention of 81% at 10 A g -1 ) Reference: Simon, P. & Gogotsi, Y. Nature Materials 7 , 845–854 (2008). Anasori, B. et al. Nature Reviews Materials 2 , 16098 (2017). Mu, X. et al . Advanced Functional Materials 29 , 1902953 (2019). Zhan, C. et al. J. Phys. Chem. Lett. 9 , 1223–1228 (2018). Lukatskaya, M. R. et al. Nat Energy 2 , 1–6 (2017). Ando, Y. et al. Advanced Functional Materials 30 , 2000820 (2020). Wang, X. et al . ACS Nano 15 , 15274–15284 (2021).

Simultaneous intercalation of sodium ion and DMSO into Ti3C2 MXene/epoxy with high electrical conductivity: Synthesis and investigation

MXene-transition Metal Sulfide Composite Electrodes for Supercapacitors: Synthesis and Electrochemical Characterization

3D Ti3C2Tx MXene/C Hybrid Foam/epoxy Nanocomposites with Superior Electromagnetic Interference Shielding Performances and Robust Mechanical Properties

Preparation and Characterization of Epoxy Resin Filled with Ti3C2Tx MXene Nanosheets with Excellent Electric Conductivity

Electrical properties of MXene thin films prepared from non-aqueous polar aprotic solvents

Tailoring Interlayer Structure and Surface Chemical State Intensifies Redox Reaction Activity of Ti3c2tx Mxene

Fast and High-Yield Anhydrous Synthesis of Ti3 C2 Tx MXene with High Electrical Conductivity and Exceptional Mechanical Strength

Preparation and mechanical performances of carbon fiber reinforced epoxy composites by Mxene nanosheets coating

Superior Role of MXene Nanosheet As Hybridization Matrix over Graphene in Enhancing Interfacial Electronic Coupling and Functionalities of Metal Oxide

An Organic Solvent-Assisted Intercalation and Collection (OAIC) for Ti3C2Tx MXene with Controllable Sizes and Improved Yield

Intercalation of Polyacrylonitrile Nanoparticles in Ti 3 C 2 T x MXene Layers for Improved Supercapacitance

Significantly improved dielectric and mechanical performance of Ti3C2Tx MXene/silicone rubber nanocomposites

Synthesis of Ti3C2 Mxene through In Situ HF and Direct HF Etching Procedures as Electrolyte Fillers in Dye-Sensitized Solar Cell

Nanoscale Surface and Bulk Electronic Properties of Ti3C2Tx MXene Unraveled by Multimodal X‐Ray Spectromicroscopy

Step‐by‐Step Guide for Synthesis and Delamination of Ti3C2Tx MXene

Enhancing the Chemical Stability of MXene Through Synergy of Hydrogen Bond and Coordination Bond in Aqueous Solution

High-Rate Electrochemical Energy Storage of MXene in Neutral Aqueous Electrolytes

A continuous interfacial bridging approach to fabricate ultrastrong hydroxylated carbon nanotubes intercalated MXene films with superior electromagnetic interference shielding and thermal dissipating properties

Elastomer nanocomposites containing MXene for mechanical robustness and electrical and thermal conductivity

Electrochemical characterization of Ti3C2T MXene prepared via a molten salt etching route in an acetonitrile-based electrolyte

Ti3C2Tx MXene modification using silicane or quaternary ammonium salt via covalent bonding or interaction for high‐performance composites