Radial basis point interpolation for strain field calculation in digital image correlation

Jiayi Du,Jian Zhao,Jiahui Liu,Dong Zhao

DOI: https://doi.org/10.1364/ao.520232

IF: 1.9

2024-05-09

Applied Optics

Abstract:Jiayi Du, Jian Zhao, Jiahui Liu, Dong Zhao In order to extract smooth and accurate strain fields from the noisy displacement fields obtained by digital image correlation (DIC), a ... [Appl. Opt. 63, 3929-3943 (2024)]

optics

What problem does this paper attempt to address?

Strain field estimation based on digital image correlation and radial basis function

xiangjun dai,fujun yang,zhenning chen,xinxing shao,xiaoyuan he

DOI: https://doi.org/10.1016/j.optlaseng.2014.05.007

IF: 5.666

2015-01-01

Optics and Lasers in Engineering

Abstract:Two methods based on digital image correlation (DIC) and radial basis function (RBF) were proposed to obtain the accurate strain field in this paper. One is a combined method. RBF was applied to remove the noisy discrete displacement data first. After that, the strain was computed by a local least-squares algorithm. The other is a partial derivative of RBF (PD-RBF) based strain estimation method which integrated denoising with differential process. The effectiveness and accuracy of the proposed methods were verified through two numerical simulation experiments. A practical application on the normal strain measurement of an aluminum alloy beam under symmetric four-point bending via an outer loading frame was also presented. The measurement results are in good accordance with the data obtained by strain gauges. Furthermore, a shape parameter selection method based on rate of convergence was suggested. The new method simplifies the choice of the good shape parameter.
Digital image correlation using iterative least squares and pointwise least squares for displacement field and strain field measurements

Bing Pan,Anand Asundi,Huimin Xie,Jianxin Gao

DOI: https://doi.org/10.1016/j.optlaseng.2008.10.014

IF: 5.666

2009-01-01

Optics and Lasers in Engineering

Abstract:Digital image correlation (DIC) method using iterative least squares algorithm (ILS) for displacement field measurement and pointwise least squares algorithm (PLS) for strain field measurement is proposed in this paper. A more general and practical intensity change model is employed with consideration of the linear intensity change of the deformed image, followed by an iterative least squares algorithm for calculating displacement field with sub-pixel accuracy. The concept of correlation function is not used in the ILS method, even though we prove that the algorithm is actually equivalent to the optimization of the sum of squared difference correlation function using improved Newton–Raphson method. Besides, different from the conventional strain estimation approaches based on smoothing the displacement fields first and followed by differentiation of the smoothed displacement fields, a simple yet effective PLS algorithm is proposed for extracting strain fields from the computed displacement fields. The effectiveness and accuracy of the proposed techniques is verified through numerical simulation experiments. A practical application of the algorithms to residual plastic deformation field measurement of GH4169 alloy subjected to tensile fatigue is also presented.
Full-Field Strain Measurement Using A Two-Dimensional Savitzky-Golay Digital Differentiator in Digital Image Correlation

Bing Pan,Huimin Xie,Zhiqiang Guo,Tao Hua

DOI: https://doi.org/10.1117/1.2714926

IF: 1.3

2007-01-01

Optical Engineering

Abstract:Many published research works regarding digital image correlation (DIC) have been focused on the improvements of the accuracy of displacement estimation. However, the original displacement fields calculated at discrete locations using DIC are unavoidably contaminated by noises. If the strain fields are directly computed by differentiating the original displacement fields, the noises will be amplified even at a higher level, and the resulting strain fields are untrustworthy. Based on the principle of local least-square fitting using two-dimensional (2D) polynomials, a 2D Savitzky-Golay (SG) digital differentiator is deduced and used to calculate strain fields from the original displacement fields obtained by DIC. The calculation process can be easily implemented by convolving the SG digital differentiator with the estimated displacement fields. Both homogeneous and inhomogeneous deformation images are employed to verify the proposed technique. The calculated strain fields clearly demonstrate that the proposed technique is simple and effective. (C) 2007 Society of Photo-Optical Instrumentation Engineers.
A Practical and Effective Regularized Polynomial Smoothing (RPS) Method for High-Gradient Strain Field Measurement in Digital Image Correlation

Xin Li,Gang Fang,Jiaqing Zhao,Zhengming Zhang,Libin Sun,Haitao Wang,Xinxin Wu

DOI: https://doi.org/10.1016/j.optlaseng.2019.04.017

IF: 5.666

2019-01-01

Optics and Lasers in Engineering

Abstract:Digital image correlation (DIC) is an effective tool for studying the deformation of tested materials. However, high-gradient strain field (HSF) measurement remains a challenging issue in DIC, because multifold factors have a significant effect on the first correlation calculation step of the original displacement and the exact strain reconstruction in the second post-processing step. In this study, we focus on the second step. The formerly proposed local Hermite has been proven as an accurate and robust method, yet substantial programming work is involved in constructing a Hermite element. To solve this issue, a regularized polynomial smoothing (RPS) method is proposed, which replaces the Hermite function of the polynomial. The RPS applies the same kernel function as the point-wise least-squares (PLS) method for easy implementation. Tikhonov regularization and the generalized cross-validation (GCV) function are also used to decrease unavoidable noise and weaken the dependence on window size. The experiments demonstrate that, in the matched/overmatched case, Tikhonov regularization in RPS can greatly decrease the degree of morbidity caused by ill-posed problems in the PLS method, thereby ensuring smoothness and stability of the solution. Moreover, the influences of window size and polynomial order of both the RPS and PLS are also closely studied. In conclusion, the proposed RPS provides a practical, robust and accurate method for HSF measurement.
Digital Image Correlation Strain Measurement Based on Moving Least-squares Fitting

张金奎,李亚智,张丽,张小娟

DOI: https://doi.org/10.3969/j.issn.1671-1815.2010.03.021

2010-01-01

Abstract:In order to obtain a reliable displacement field for digital speckle image correlation technique,a new displacement analysis method based on moving least squares analysis is proposed and a reliable strain field is obtained.The authors improve on the original cross search method and the improved search algorithm is more efficient.The validity of the suggested method and the relevant computer code were verified through the analysis of the computer-simulated speckle images.The method was also used to measure strain in the tensile test of a composite laminate plate.The results agree fairly well with those obtained by the conventional measurement.
Strain field denoising for digital image correlation using a regularized cost-function

bing pan,jieyu yuan,yong xia

DOI: https://doi.org/10.1016/j.optlaseng.2014.03.016

IF: 5.666

2015-01-01

Optics and Lasers in Engineering

Abstract:In digital image correlation (DIC), the widely used forward-additive Newton–Raphson (FA-NR) algorithm and the recently introduced equivalent but more efficient inverse-compositional Gauss–Newton (IC-GN) algorithm are capable of providing both displacements and displacement gradients (strains) for each calculation point. However, the obtained displacement gradients are seriously corrupted by various noises, and for this reason these directly computed strains are usually considered as useless information and therefore discarded. To extract strain distributions more accurately, much research efforts have been dedicated to how to smooth and differentiate the noisy displacement fields using appropriate numerical approaches. In this contribution, contrary to these existing strain estimation approaches, a novel and alternative strain estimation approach, based on denoising the noisy strain fields obtained by FA-NR or IC-GN algorithm using a regularized cost-function, is proposed. The effectiveness and practicality of the proposed strain estimation technique is carefully examined using both computer-simulated images with imposed homogeneous and inhomogeneous deformation, and experimentally obtained images. Experimental results reveal that the strains obtained by the proposed method are comparable to those determined by post-processing of the displacement fields using conventional pointwise least squares strain estimation approach.
Displacement smoothing and strain estimation using Savitaky-Golay filters in digital image correlation

Pan Bing,Hui Min Xie,Hua Tao,Wei Ning Wang,Fang Yan

DOI: https://doi.org/10.4028/www.scientific.net/KEM.326-328.135

2006-01-01

Key Engineering Materials

Abstract:Recently, many research works were concentrated on how to improve the accuracy of displacement fields in digital image correlation (DIC). However, the original displacement fields calculated at discrete locations using DIC are unavoidably contaminated by noises. If the strain fields are directly computed by differentiating the original displacement fields, the noises will be amplified even at a higher level and the resulting strain fields are untrustworthy. To acquire reliably estimation of strain fields, in this paper, Savitaky-Golay (SG) filters are introduced to obtain smoothed displacement fields and reasonable strain estimation. The principle of two-dimensional SG filters is described in detail first. Then images of uniaxial tensile and three-point bending experiments were used to verify the proposed approach. The resulting smoothed displacement fields and strain fields clearly show that the proposed method is simple and effective.
A Weak-Form Method for Strain Field Calculation with Digital Image Correlation

Leiting Dong,Qiuhong Yang,Junbo Wang

DOI: https://doi.org/10.1016/j.optlaseng.2019.05.012

IF: 5.666

2019-01-01

Optics and Lasers in Engineering

Abstract:In digital image correlation (DIC), iterative spatial-domain cross-correlation algorithms have been routinely used to extract displacement fields from the recorded images. Then, strain fields are computed from the noisy displacement fields by a proper numerical different approach, like pointwise least squares fitting, which is tricky in choosing optimal calculation parameters. This work proposes an alternative weak-form framework to calculate strain fields from noisy displacement measurements by DIC. While direct numerical differentiation may amplify the noise in the displacement fields, the proposed method transfers differentiation into integration by employing the idea of the weak-form, which is the foundation of modern computational mechanics. By selecting cosine series as trial/test functions and employing their orthogonality, a semi-analytical formula for calculating the strain field is given. Moreover, the Filon's method is used in this study to improve the accuracy of numerical integration as sinusoidal terms are involved. The effectiveness of the proposed method is verified by numerical examples. It is found that the proposed method is comparable to the famous PLS algorithm when it is for simple strain fields, while it is better in accuracy and its insensitivity to noise when large-gradient or highly-oscillating strain fields are to be measured.
A strain mode spectral digital image correlation method for displacement field analysis

Shihao Han,Yuming He,Jian Lei,Yuyang Xie,Yongbo Yang

DOI: https://doi.org/10.1007/s10409-023-22430-x

IF: 3.5

2023-01-01

Acta Mechanica Sinica

Abstract:A spectral image correlation method considering the effect of displacement gradients upon displacement analysis in the Fourier frequency domain is proposed. A spectral image correlation criterion is studied and established to match the target subset image with the reference subset image in the frequency domain. An iterative algorithm for calculating displacement and strain is then derived, and the Hessian matrix remains unchanged within an iterative process. During the formation of the Hessian matrix, the greyscale gradients of the reference subset image can be calculated using the fast Fourier transform with high computational efficiency and accuracy. An accurate Fourier transform resampling technique, instead of the traditional interpolation method, is used to reconstruct or up-date the target image at a subpixel position in the deformed subset image. To verify the validity and accuracy of the proposed method, a series of images (2D-Challenge 1.0, sample 6) provided by the International DIC Challenge Committee (IDCC) was used for displacement analysis. The analyzed error results show that the proposed method is better than the published literature in accuracy. The second simulation experimental result with a strain of 50% is performed and the corresponding displacement accuracy is about 0.0032 pixel under the condition of 41 × 41 subset. Finally, a 14.85% uniaxial tensile test of a silicone rubber specimen is performed, and the analyzed displacement and strain distribution are given.
Self-Adaptive Strain Field Calculation Based on Digital Image Correlation

Li Xin,Zhao Jiaqing,Zhang Zhengming,Wang Haitao,Sun Libin,Wu Xinxin

DOI: https://doi.org/10.3788/AOS202141.2312002

2021-01-01

Acta Optica Sinica

Abstract:For measurement methods of heterogeneous deformation strain with digital image correlation (DIC) technology, the accuracy of the reconstructed strain is greatly affected by the manually selected parameters. Through error analysis of the partial least squares (PLS) method and the regularized polynomial smoothing (RPS) method, a DIC-based self-adaptive strain field calculation method is proposed in this paper to solve this problem. The method searches for the parameter combination with the minimum total error within the given parameter range and uses the optimal parameters to obtain a strain field with higher accuracy. The measurement result is slightly affected by the type of the deformation field. The simulation experiment results show that the calculation accuracy of the method is close to that of the PLS method at the optimal parameters. This research effectively solves the problem of selecting the optimal parameters of PLS and RPS methods.
A Post-Processing Method Based on Radial Basis Functions for the Fast Retrieval of the Strain Field in Digital Image Correlation Methods

Corrado Groth,Andrea Chiappa,Stefano Porziani,Marco Evangelos Biancolini,Emanuele Marotta,Pietro Salvini

DOI: https://doi.org/10.3390/ma15227936

2022-11-10

Abstract:Digital image correlation methods allow the determination of the displacement (and thus the strain) field of a target by picture comparisons, without the application of strain gauges or other invasive devices. Homologous sites are mapped from the undeformed to the deformed configuration, and displacements retrieved at a cloud of points in a scattered fashion. Radial basis functions (RBF) offer a rapid and reliable tool to post-process on-the-fly data from image correlation, in order to compute deformations directly without the need for generating a numerical grid over the measurement points. Displacements and associated strains can be computed only where desired, tracking automatically only the most reliable features for each image. In this work, a post-processing strain evaluation method for large displacement problems, based on RBF and the Green-Lagrange tensor, is presented and demonstrated for several test cases. At first, the proposed method is adopted on a set of artificially generated pictures, demonstrating a faster convergence with respect to FEM even when few points are used. Finally, the approach is applied to cases for which experimental results are available in the literature, exhibiting a good agreement.
Digital Image Correlation Using Energy Minimization in Full-Field Displacement and Strain Measurement

Huo Xing,Cheng Teng,Tan Jieqing,Gao Yue,Cai Yulong

DOI: https://doi.org/10.1117/12.2019069

2013-01-01

Abstract:Digital image correlation (DIC) method is an effective way for full-field strain measurement. Optical flow estimation methods combined with a global searching strategy for displacement field measurement are introduced in this paper. Compared with the conventional DIC method, this strategy can lessen possible mismatching between the reference image and warped image. By minimization the energy function of displacement field, displacement continuity and displacement gradients continuity among calculation points are achieved. For detecting large displacements, a coarse-to-fine strategy is also employed. More importantly, the architecture parallelization of optical flow estimation and searching strategy can decrease the running time of this method for time-critical conditions.This proposed method is universally applicable to the images with shadows, rotation, and large deformation. Several pairs of simulated digital speckle images were used to evaluate the performance of this novel DIC method, and the experimental results clearly demonstrate its robustness and effectiveness.
Improved Hermite finite element smoothing method for full-field strain measurement over arbitrary region of interest in digital image correlation

Jiaqing Zhao,Pan Zeng,Bin Pan,Liping Lei,Hongfei Du,Wenbin He,Yang Liu,Yuejie Xu

DOI: https://doi.org/10.1016/j.optlaseng.2012.04.008

IF: 5.666

2012-01-01

Optics and Lasers in Engineering

Abstract:We investigate the finite element method and the Tikhonov regularization for smoothing noisy displacement field obtained from the digital image correlation (DIC). Among various finite elements, the C2 continuous Hermite finite element has been proven to be an effective high-order element which ensures both continuity and smoothness of the final strain field. However, the standard Hermite element is required to be rectangular, which cannot tackle the region of interest of arbitrary shape. To overcome this constraint, we propose the improved Hermite finite element smoothing method (IHFESM) to extend the generality of Hermite finite element that is able to measure the arbitrary region of interest. The IHFESM is implemented by eliminating the contribution to the global regularization matrix from the invalid region. The proposed method could be employed to smooth the noisy displacement field obtained by DIC, and reconstruct the reliable strain field by differentiation. The effectiveness of IHFESM is verified by two tension experiments of plates with three and four holes.
On the Image Correlation Measurement of Displacement Fields With Strong Strain Gradients Or Discontinuities

Wei Tong,Hang Yao

DOI: https://doi.org/10.1007/978-1-4020-6239-1_334

2007-01-01

Abstract:Digital image correlation (DIC) based full-field deformation measurement technique has been successfully used to map both nominally homogenous and non-homogenous deformation fields [15]. Among the key parameters in a digital image correlation analysis are grid point selection, subset size and shape, local mapping function for the subset, and the image correlation criterion and its optimization solution algorithm used. In particular, the affine deformation mapping function (equivalent to the assumption that the subset deforms uniformly) is most commonly used. For a given deformation field with a very high strain gradient (such as the strain field around a sharp crack tip [1] and the boundary region across a shear band or tensile deformation band due to certain material softening behaviour [4]), such a choice of the local mapping function for a given subset is questionably. Furthermore, the common use of a uniform grid point set with subset centred at each grid point would also not be proper to achieve the optimum balance between the spatial resolution and accuracy of displacement field measurements. Several novel digital image correlation analysis methods are presented here to specifically address the above mentioned issues.
Random Error in Strain Calculation Using Regularized Polynomial Smoothing (RPS) and Point-wise Least Squares (PLS) in Digital Image Correlation

Xin Li,Gang Fang,Jiaqing Zhao,Zhengming Zhang,Libin Sun,Haitao Wang,Xinxin Wu

DOI: https://doi.org/10.1016/j.optlaseng.2021.106590

IF: 5.666

2021-01-01

Optics and Lasers in Engineering

Abstract:The strain error analysis is greatly concerned recently as digital image correlation (DIC) is used to measure the heterogeneous deformation. This paper focuses on the estimation of random error and under-matched error caused by two strain calculation methods, i.e. the point-wise least squares (PLS) and the regularized polynomial smoothing method (RPS). Two assumptions are put forward on the noise error of the calculated displacement that are: a) it is pure random error without bias and b) in each strain window, it is the independent Gaussian white noise with zero-mean. Based on the assumptions, the random error of displacement and strain is estimated, and the under-matched error of displacement and strain is theoretically analyzed by the aid of Laplacian operator. These two error solutions are verified by some stimulated experiments. Then for the typical kernel function of 3rd order polynomial, a self-adaptive algorithm minimizing the total error is proposed to choose the optimal parameters, i.e. window size and parameter... Experiments show that when the original displacement noise conforms to the assumptions strictly, 1) the estimated random error and under-matched error agrees very well with the experimental value, 2) the self-adaptive algorithm can give the optimal parameters in restoring the displacement and strain field, and 3) the estimation of random error and under-matched error is affected by DIC noise greatly, and it is better to use low-pass Gaussian filter before utilizing self-adaptive algorithm.
The Mechanism of Strain Influence on Interpolation Induced Systematic Errors in Digital Image Correlation Method

Yang Liu,Qingchuan Zhang,Yong Su,Zeren Gao,Zheng Fan,Shangquan Wu

DOI: https://doi.org/10.1016/j.optlaseng.2019.04.023

IF: 5.666

2019-01-01

Optics and Lasers in Engineering

Abstract:Digital image correlation methods are widely used in displacement and strain measurements nowadays. Although the influence of strain on measurement accuracy has been extensively discussed, its mechanism is still unknown. In this work, numerical simulations using first-order shape functions are carried out to calculate the displacement of uniform tensile and compressive deformation, and the systematic errors corresponding to different strain values are illustrated and compared. An obvious reduction in the systematic errors can be observed when the strain value is greater than 0.01. The subset size also has an impact on the systematic errors; in particular, systematic errors can be eliminated using a suitable subset size. Furthermore, the mechanism of the influence of strain and subset size on systematic errors is revealed: the sub-pixel interpolation errors in deformed subsets bring forth systematic errors, and the existence of strain contributes to the sizes of the induced systematic errors. An analytical formula describing the relationship between systematic errors and strain/subset size is deduced and verified. This work can help researchers predict systematic errors for certain strains and subset sizes, while furthering our understanding of the role of strain in correlation calculations.
Application of Digital Image Correlation Method to In-Situ Dynamic Strain Measurement

Liexiong Lin,Hao Lu,Jijin Xu,Junmei Chen,Chun Yu

DOI: https://doi.org/10.1007/s12204-017-1864-y

2017-01-01

Journal of Shanghai Jiaotong University (Science)

Abstract:Application of digital image correlation (DIC) method to determination of in-situ dynamic strain is presented in this study. Firstly, an integrative software is programmed based on the DIC algorithms and point-wise least-squares fitting technique. Then, simulated speckle images are generated to study the computational accuracy of this software. The experimental setup and procedures for measuring in-situ dynamic strain through both DIC and strain gauge are proposed. The DIC results are close to those measured by strain gauge. This fact reveals that DIC is a practical and effective tool for in-situ dynamic strain measurement. Finally, the full-field in-situ dynamic strain of another specimen is measured by DIC, and the overall distribution of the strain in the measurement area is clearly shown.
Full-Field Strain Measurement Based on Least-Square Fitting of Local Displacement for Digital Image Correlation Method

Bing Pan,Huimin Xie

DOI: https://doi.org/10.3321/j.issn:0253-2239.2007.11.012

2007-01-01

Abstract:In order to obtain reliable strain field, full-field strain measurement based on least-square fitting of local displacement for digital image correlation method is proposed. The principle of digital image correlation (DIC) method is introduced, and full-field strain measurement based on local least-square fitting is expatiated, strain calculation near the border, hole and crack are also discussed. The results from homogeneous deformation test and the tensile test of the aluminum specimen with a hole in the center obviously demonstrated the validity of this technique. Large strain calculating window is recommended to use in case of homogeneous deformation, so calculation results approach true value; For inhomogeneous deformation, large calculating window should be selected to according to the noise level of the local displacement field, but when displacement field has high accuracy, smaller calculating window is selected.
Improved Digital Image Correlation Method for Eliminating Pixel Shape-Induced Errors in Shear-Strain Calculations

Bei Peng,Chengcheng Huang,Wu Zhou,Huijun Yu,Zhi Zeng

DOI: https://doi.org/10.1520/jte20120085

2013-01-01

Journal of Testing and Evaluation

Abstract:Digital image correlation is widely used in non-contact displacement/strain measurements for numerous engineering applications. Under rigid body rotation or shear deformation, however, the calculated surface strain of specimens is unreliable when camera pixels are characterized by non-square geometry, that is, the width-to-height ratio of pixels is not I. This study analyzes the computational errors introduced by cameras, and proposes a modified least-squares method that eliminates such errors when the strain field is calculated. Experimental results confirm that the algorithm validly and effectively computes shear strain.
Deformation Measurement by Two-Dimensional Multi-Camera Full-Field Digital Image Correlation

Cong Liu,Yuntong Dai,Meiling Dai,Xiaopeng Liu,Chengpeng Zhu,Xinxing Shao,Xiaoyuan He

DOI: https://doi.org/10.3788/AOS201636.1212002

2016-01-01

Acta Optica Sinica

Abstract:The factors impacting strain precision in the digital image correlation (DIC) method is derived theoretically.It is pointed out that the precision of strain calculation will decrease as the calculation window gets small.In order to improve the effective image resolution,a novel perspective to two-dimensional multi-camera fullfield DIC method is proposed for slender specimen.The sub-pixel position of matching feature point pairs is found based on feature point detection and matching algorithm.The matching feature point pairs are registered with high precision using the DIC method.Finally,a gradually optimized homography solution method is developed to solve the image transformation to get the seamless stitched images before and after deformation.Two sets of experiments including pure translation and three-point bending of rubber beam are conducted.In the pure translation experiments,the mean error and root-mean-square error of calculated strain are within 50 με,which verifies the validity of this method.Two-dimensional and three-dimensional multi-camera DIC methods are compared through the three-point bending experiments.Based on the results,merits and demerits of the proposed method are discussed.

Radial basis point interpolation for strain field calculation in digital image correlation

Strain field estimation based on digital image correlation and radial basis function

Digital image correlation using iterative least squares and pointwise least squares for displacement field and strain field measurements

Full-Field Strain Measurement Using A Two-Dimensional Savitzky-Golay Digital Differentiator in Digital Image Correlation

A Practical and Effective Regularized Polynomial Smoothing (RPS) Method for High-Gradient Strain Field Measurement in Digital Image Correlation

Digital Image Correlation Strain Measurement Based on Moving Least-squares Fitting

Strain field denoising for digital image correlation using a regularized cost-function

Displacement smoothing and strain estimation using Savitaky-Golay filters in digital image correlation

A Weak-Form Method for Strain Field Calculation with Digital Image Correlation

A strain mode spectral digital image correlation method for displacement field analysis

Self-Adaptive Strain Field Calculation Based on Digital Image Correlation

A Post-Processing Method Based on Radial Basis Functions for the Fast Retrieval of the Strain Field in Digital Image Correlation Methods

Digital Image Correlation Using Energy Minimization in Full-Field Displacement and Strain Measurement

Improved Hermite finite element smoothing method for full-field strain measurement over arbitrary region of interest in digital image correlation

On the Image Correlation Measurement of Displacement Fields With Strong Strain Gradients Or Discontinuities

Random Error in Strain Calculation Using Regularized Polynomial Smoothing (RPS) and Point-wise Least Squares (PLS) in Digital Image Correlation

The Mechanism of Strain Influence on Interpolation Induced Systematic Errors in Digital Image Correlation Method

Application of Digital Image Correlation Method to In-Situ Dynamic Strain Measurement

Full-Field Strain Measurement Based on Least-Square Fitting of Local Displacement for Digital Image Correlation Method

Improved Digital Image Correlation Method for Eliminating Pixel Shape-Induced Errors in Shear-Strain Calculations

Deformation Measurement by Two-Dimensional Multi-Camera Full-Field Digital Image Correlation