Abstract:Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, Ahead of Print. Although there are many studies related to design, modeling, and optimization of fused deposition modeling (FDM) process parameters in the literature, the absence of a systematic approach to increase the reliability of model selection and optimization results is an important shortcoming that must be addressed. To make up for this deficiency, a new strategy was proposed to obtain desired quality on mechanical properties by adjusting FDM process parameters. This attempt involves manufacturing, modeling, and optimization point of view. The D-optimal method was employed to form experiment set, including process parameters. A hybrid approach neuro regression combining artificial neural network (ANN) and regression analysis together was used for modeling of FDM process. The most significant advantage of the neuro-regression approach compared to ANN is that the mathematical models can be used directly without needing any transformation. This is not possible in neural networks and, therefore, significantly limits and complicates the use of models obtained using ANN. The present study aims at optimization of the FDM process parameters, including infill density, infill pattern, layer thickness, and print speed on ultimate strength, fracture strength, and fracture strain for polylactide (PLA). In this regard, modified versions of the optimization algorithms Differential Evolution, Nelder Mead, and Simulated Annealing were used to find the best or elite designs. Linear or nonlinear models consisting of polynomial, trigonometric, and logarithmic expressions and their hybrid forms were employed to define the strength and strain behavior of PLA. It is concluded that (a) implementations of the optimization algorithms provide a 19% improving the minimum strain value if it is compared with the experimental results, (b) infill pattern types (x2) were found as honeycomb, triangle, and cubic for the designs in terms of maximum fracture strength, minimum strain, and maximum ultimate tensile strength respectively, (c) many alternatives near optimum local designs could be obtained based on Nelder Mead algorithm for fracture strength and ultimate strength parameters. Thus, this allows work in a wide range of applications without depending on a single result for production.

Optimizing FDM 3D printing parameters for improved tensile strength using the Takagi–Sugeno fuzzy neural network

Experimental study of the effect of different 3D printing parameters on tensile strength, using artificial neural network

Optimizing FDM process parameters: predictive insights through taguchi, regression, and neural networks

An artificial neural network-based predictive model for tensile behavior estimation under uncertainty for fused deposition modeling

A novel systematically optimized tabular neural network (TabNet) algorithm for predicting the tensile modulus of additively manufactured PLA parts

Machine Learning Study of the Effect of Process Parameters on Tensile Strength of FFF PLA and PLA-CF

Optimization of tensile strength in 3D printed PLA parts via meta-heuristic approaches: a comparative study

Experimental investigation and neural network development for modeling tensile properties of polymethyl methacrylate (PMMA) filament material

Optimization of FDM 3D printing process parameters for multi-material using artificial neural network

Manufacturing-induced stochastic constitutive behaviors of additive manufactured specimens: testing, data-driven modeling, and optimization

Machine learning models to predict the relationship between printing parameters and tensile strength of 3D Poly (lactic acid) scaffolds for tissue engineering applications

Machine Learning-Assisted Pattern Recognition Algorithms for Estimating Ultimate Tensile Strength in Fused Deposition Modeled Polylactic Acid Specimens

Optimization of Tensile Strength and Cost-Effectiveness of Polyethylene Terephthalate Glycol in Fused Deposition Modeling Using the Taguchi Method and Analysis of Variance

Optimization of FFF process parameters to improve the tensile strength and impact energy of polylactic acid/carbon nanotube composite

Tensile failure strength and separation angle of FDM 3D printing PLA material: Experimental and theoretical analyses

Development of artificial intelligence‐based neural network prediction model for responses of additive manufactured polylactic acid parts

Prediction of tensile strength using machine learning algorithms in fused deposition modeling

Experimental Study of the Tensile Behavior of Structures Obtained by FDM 3D Printing Process

A new strategy for manufacturing, modeling, and optimization of 3D printed polylactide based on multiple nonlinear neuro regression analysis and stochastic optimization methods

Effect of Printing Parameters on the Tensile Properties of 3D-Printed Polylactic Acid (PLA) Based on Fused Deposition Modeling

Effect of Printing Parameters on the Mechanical Properties of Parts Fabricated with Open-Source 3D Printers in PLA by Fused Deposition Modeling