Abstract:Organometallically prepared AlH3 and as-received Al powders were mixed with MgH2 to improve the dehydriding and rehydriding properties of MgH2. Thermal analysis shows that the onset dehydriding temperature of MgH2 is reduced by 55 degrees C (or 25 degrees C) when mixed with AlH3 (or Al). The destabilization of MgH2 is attributed to the formation of Mg-Al alloys through the reaction between MgH2 and Al. Isothermal dehydriding measurements demonstrate that AlH3 and Al both improve the dehydriding kinetic of MgH2 to some extent, and it only takes 44 min for MgH2 + AlH3 (5.4 h for MgH2 + Al) to release 60% of the hydrogen of MgH2 at 300 degrees C, but 8.6 h are required for as-milled MgH2. The apparent activation energy for the dehydriding of MgH2 is reduced from 174.6 kJ mol(-1) for as-milled MgH2 to 154.8 and 138.1 kJ mol(-1) for MgH2 mixed with Al and AlH3 respectively; this is responsible for the improvement in the dehydriding kinetics of MgH2. Despite this, AlH3 is better in destabilizing MgH2 than the as-received Al for the fact that Al* formed in situ from the decomposition of AlH3 is oxide-free on the particle surfaces, which effectively increases the chemical activity of Al*. Furthermore, the brittleness of AlH3 makes it easier to mix MgH2 with AlH3, which would result in uniform distributions of Mg and Al and shortening of the diffusion length. Concerning the reversibility, at 300 degrees C and 5 MPa H-2 and MgH2 are fully recovered in the dehydrided MgH2 + Al, and MgH2 + AlH3 samples after rehydriding for 10 h. The rehydriding kinetic of MgH2 is significantly enhanced for the dehydrided MgH2 + AlH3, but not in the case of the MgH2 + Al.

Correction: Effect of LiH on the fast hydrolysis and hydrogen generation of MgH 2 by ball milling

Synergistic Effect of LiBH4and LiAlH4Additives on Improved Hydrogen Storage Properties of Unexpected High Capacity Magnesium Hydride

Hydrogen generation from the hydrolysis of LaMg12H27 ball-milled with LiH

Correction: Enhanced Hydrogen Storage Properties of MgH2 with Numerous Hydrogen Diffusion Channels Provided by Na2Ti3O7 Nanotubes

Effect of Salts Addition on the Hydrogen Generation of Al–LiH Composite Elaborated by Ball Milling

Exploration of hydrogen generation from an Mg-LiBH4 system improved by NiCl2 addition

Improved Hydrogen Generation from the Hydrolysis of Aluminum Ball Milled with Hydride

Improving MgH2 formation kinetics and its effect on NaBH4 synthesis

Correction: Engineering lithiophilic Ni-Al@LDH interlayers on a garnet-type electrolyte for solid-state lithium metal batteries

Improved Hydrogen Storage Properties of MgH2 by Ball Milling with AlH3: Preparations, De/rehydriding Properties, and Reaction Mechanisms

Hydrogen generation from the hydrolysis of Mg powder ball-milled with AlCl3

Correction: in Situ Study of the Catalytic Mechanism for the Oxygen Reduction Reaction on a Polypyrrole Modified Carbon Supported Cobalt Hydroxide Cathode in Direct Borohydride Fuel Cells.

Study on Hydrogen Generation from the Hydrolysis of a Ball Milled Aluminum/calcium Hydride Composite

Hydrogen Generation from Mg–LiBH4 Hydrolysis Improved by AlCl3 Addition

Improved hydrogen storage kinetics of the Li-Mg-N-H system by addition of Mg(BH4)2.

Correction: Recent progress on covalent organic frameworks for photocatalytic hydrogen generation via water splitting

Correction: Additive-mediated intercalation and surface modification of MXenes

Correction: Heteroaggregation behavior of graphene oxide on Zr-based metal–organic frameworks in aqueous solutions: a combined experimental and theoretical study

Correction: Hierarchical Co/MoNi heterostructure grown on monocrystalline CoNiMoOx nanorods with robust bifunctionality for hydrazine oxidation-assisted energy-saving hydrogen evolution

Correction: An ultrasound-induced MXene doped PAM–SA super-tough hydrogel

Correction to “Kinetics on Li Deintercalation in Mg- or Li-Doped SiO/Graphite Composite Anodes for Li Ion Batteries: Dopant Effect”