Abstract:Charge balance is one of the most important factors for realizing high performance OLEDs. In this work, we provide a novel strategy to improve the charge balance in OLEDs by optimizing the hole injection layer and the electron transporting layer and thereby controlling the charge carrier supplies in the device. Red OLEDs with improved performance were achieved. Charge balance is one of the most important factors for realizing high performance organic light emitting devices (OLEDs). In this work, we provide a novel strategy to improve the charge balance in OLEDs by optimizing the hole injection layer (HIL) as well as the electron transporting layer (ETL) and thereby controlling the charge carrier supplies in the device. First, we develop a p‐dopant material (PD02), with a lowest unoccupied molecular orbit (LUMO) of −4.63 eV, much shallower than that of the commercial material (PD01) of which the LUMO is −5.04 eV. Nevertheless, this enables us to modulate the supply of holes to the emissive layer through tuning doping concentration. We demonstrate that device performances are significantly improved by employing such a scheme. With a 23% molar doping of PD02, a bottom emission red OLED achieves an external quantum efficiency (EQE) of over 30%, an operating voltage of 3.4 V and a LT95 ~15,000 h at 10 mA/cm2, with a Digital Cinema Initiative P3 (DCI‐P3) chromaticity of CIE (X, Y) = (0.68, 0.32). Moreover, the efficiency roll‐off is suppressed up till ~3500 cd/m2, a desirable feature in display applications. The lateral conductivity of by using such HIL is also found to be much lower than that of PD01, resulting in reduced crosstalk among RGB pixels. Next, a new electron transporting material (ETM‐02) with a deep LUMO of −2.86 eV is also introduced to further optimize the charge balance. Although devices with ETM‐02 shows lower voltage and higher EQE, lifetime is compromised. In order to improve lifetime, additional fine tuning of the charge balance is essential. Finally, a second p‐dopant PD03 with a LUMO of −4.91 eV is added to the HIL to further extend the modulation flexibility in the hole injection. A double‐layer HIL consisting of 8 nm of HTM:16% PD02 and 2 nm of HTM:3% PD03, where the former is in contact with anode, is adopted in the device structure. The bottom emission deep red device achieve EQE over 30%, an operating voltage of 3.2 V and an improved LT95 ~13,000 h at 10 mA/cm2 with a BT.2020 range chromaticity of CIE (X, Y) = (0.701, 0.299). In the double HIL configuration, the introduction of PD03 provides one more parameter for tuning and therefore improves the overall device performances.

Reducing Spontaneous Orientational Polarization via Semiconductor Dilution Improves OLED Efficiency and Lifetime

Controlling Polarization‐Induced Polaron Accumulation in OLEDs via Device Design

Linear Carbene Metal Amides As a New Class of Emitters for Highly Efficient Solution-Processed and Vapor-Deposited OLEDs (conference Presentation)

Exciton- and Polaron-Induced Reversible Dipole Reorientation in Amorphous Organic Semiconductor Films

Process Engineered Spontaneous Orientation Polarization in Organic Light-Emitting Devices

Improved Light Extraction in Organic Light‐Emitting Diodes via Semiconductor Dilution

Achieving Efficient and Stable Blue Organic Light-Emitting Diodes Via Suppressing Triplet–Polaron Annihilation Processes

Improving the Performance of Solution-Processed Small Molecule OLEDs Via Micro-Aggregation Formed by an Alcohol Additive Incorporation

Effect of solvent polarity on the performance of thermally activated delayed fluorescence OLEDs

A Comprehensive Model of the Degradation of Organic Light-Emitting Diodes and Application for Efficient Stable Blue Phosphorescent Devices with Reduced Influence of Polarons

Exciton Regulation for Organic Light-Emitting Diodes with Improved Efficiency and Roll-Off by Managing the Bipolar Spacer Layers Based on Interfacial Exciplexes

Employing ∼100% Excitons in OLEDs by Utilizing a Fluorescent Molecule with Hybridized Local and Charge‐Transfer Excited State

High Fluorescence Rate of Thermally Activated Delayed Fluorescence Emitters for Efficient and Stable Blue OLEDs

Reducing Efficiency Roll-off of Phosphorescent Organic Light Emitting Diodes by Using Phosphor Assisted Energy Funneling

The Improvement of the Performance of Sky-Blue OLEDs by Decreasing Interface Traps and Balancing Carriers with PSVA Treatment

Charge balance in OLEDs: Optimization of hole injection layer using novel p‐dopants

Solution-Processed Self-Stratifying Layer with Controllable Dielectric Polarization for High-Luminance Organic Light-Emitting Diodes

Role of Molecular Orbital Energy Levels in OLED Performance

Impact of Spontaneous Orientational Polarization on Triplet-Triplet Upconversion-Based Blue Organic Light-Emitting Diodes

Molecular‐Scale Strategies to Achieve High Efficiency and Low Efficiency Roll‐off in Simplified Solution‐Processed Organic Light‐Emitting Diodes

Highly Efficient OLEDs on ITO-free Polymeric Substrates