Abstract:An increasing number of studies on non-contact vital sign detection using radar are now beginning to turn to data-driven neural network approaches rather than traditional signal-processing methods. However, there are few radar datasets available for deep learning due to the difficulty of acquiring and labeling the data, which require specialized equipment and physician collaboration. This paper presents a new model of heartbeat-induced chest wall motion (CWM) with the goal of generating a large amount of simulation data to support deep learning methods. An in-depth analysis of published CWM data collected by the VICON Infrared (IR) motion capture system and continuous wave (CW) radar system during respiratory hold was used to summarize the motion characteristics of each stage within a cardiac cycle. In combination with the physiological properties of the heartbeat, appropriate mathematical functions were selected to describe these movement properties. The model produced simulation data that closely matched the measured data as evaluated by dynamic time warping (DTW) and the root-mean-squared error (RMSE). By adjusting the model parameters, the heartbeat signals of different individuals were simulated. This will accelerate the application of data-driven deep learning methods in radar-based non-contact vital sign detection research and further advance the field.

What problem does this paper attempt to address?

The main problem that this paper attempts to solve is to accurately model the chest - wall motion (CWM) caused by heartbeats in non - contact radar vital - sign detection, so as to generate high - quality simulated data to support the application of deep - learning methods. Specifically, the paper aims to: 1. **Solve the problem of insufficient data**: Due to the difficulties in obtaining and annotating radar data, the radar data sets available for deep learning are very limited. Therefore, a method that can generate a large amount of simulated data is required to make up for the lack of actual data. 2. **Improve the accuracy of heartbeat - signal extraction**: In non - contact radar vital - sign detection, the respiratory signal and the heartbeat signal are often intertwined and difficult to separate. Traditional signal - processing methods (such as band - pass filters) may cause waveform distortion or loss of physical meaning. Therefore, a more accurate method is needed to extract and simulate the heartbeat signal. 3. **Establish a physiologically reasonable mathematical model**: Through in - depth analysis of the published CWM data and in combination with electrocardiogram (ECG) feature points, construct a mathematical model that can reflect the motion characteristics of each stage of the cardiac cycle. This model should be able to generate simulated data that highly matches the measured data. ### Main contributions - **Consistent CWM patterns**: Through the VICON infrared motion - capture system and the continuous - wave (CW) radar system, it has been verified that the chest - wall motion caused by heartbeats has a consistent pattern. - **CWM characteristics of each stage of the cardiac cycle**: The CWM characteristics of each stage of the cardiac cycle have been identified and summarized, providing a basis for subsequent modeling. - **Construction and verification of the mathematical model**: Combining physiological characteristics and CWM characteristics, a mathematical model has been constructed, and the high - fidelity of the simulated data generated by it has been verified through qualitative analysis, quantitative analysis, and spectral analysis. ### Structural overview - **Section 2**: Public VICON and 24 - GHz CW radar data are analyzed in detail, the chest - wall motion patterns caused by heartbeats are summarized, and a mathematical model is constructed based on this. - **Section 3**: Qualitative and quantitative analyses are carried out on the data generated by the model, and a comparison is made with the actually collected data to verify the rationality and effectiveness of the model. - **Section 4**: The limitations and potential applications of the model are discussed. - **Section 5**: Conclusions. ### Construction of the mathematical model To construct the CWM model, the author divides the cardiac cycle into 10 stages and selects appropriate functions for fitting according to the motion characteristics of each stage. For example, in the isovolumetric contraction period (IVC), the Sigmoid function is used to describe the characteristics of myocardial motion; in the rapid ejection period (RPE), the exponential decay function is used to describe the change in velocity. The selection of these functions is based on the velocity - change waveform characteristics of the actual signal and takes into account the transitions and interactions between the various stages. In this way, this model can generate high - quality simulated data and support the application of data - driven deep - learning methods in non - contact radar vital - sign detection.

Chest Wall Motion Model of Cardiac Activity for Radar-Based Vital-Sign-Detection System

Doppler Radar Noncontact Imaging of Human Cardiac Motion

Doppler Vital Signs Detection in the Presence of Large-Scale Random Body Movements

Nmr-VSM: Non-Touch Motion-Robust Vital Sign Monitoring via UWB Radar Based on Deep Learning

Cardiogram Detection with a Millimeter-wave Radar Sensor

Investigating Respiration-Heartbeat Separation Through a Multi-Point Scattering Chest Wall Motion Model: 60 GHz FMCW Radar Assessment

Using FMCW Millimeter-Wave Radar to Realize the Detection of Vital Signs

Noncontact Cardiac Activity Detection Based on Single-Channel ISM Band FMCW Radar

A new method for vital sign detection using FMCW radar based on random body motion cancellation

Motion-Tolerant Non-Contact Heart-Rate Measurements from Radar Sensor Fusion

mmRH: Noncontact Vital Sign Detection With an FMCW mm-Wave Radar

Millimeter-wave Radar Vital Signs Detection Based on Modified Independent Component Analysis

Simulation and Measurement of Human Respiration and Heartbeat with Millimeter- Wave Radar

mm-Wave Radar-Based Vital Signs Monitoring and Arrhythmia Detection Using Machine Learning

Intelligent Heart Rate Extraction Method Based on Millimeter Wave Radar

Motion-Robust Contactless Heartbeat Sensing Using 4-D Imaging Radar

Vital Signs Detection of Moving Targets Using FMCW Radar

Vital Sign Detection during Large-Scale and Fast Body Movements Based on an Adaptive Noise Cancellation Algorithm Using a Single Doppler Radar Sensor

Contactless Simultaneous Breathing and Heart Rate Detections in Physical Activity Using IR-UWB Radars

Contactless multiscale measurement of cardiac motion using biomedical radar sensor

Non-Contact Realtime Vital Signs Monitoring System Based on Millimeter Wave FMCW Radar