Disposable sensors based on biodegradable polylactic acid piezoelectret films and their application in wearable electronics

Xingchen Ma,Qianqian Hu,Ying Dai,Pengfei He,Xiaoqing Zhang

DOI: https://doi.org/10.1016/j.sna.2022.113834

2022-10-16

Abstract:The alarming rise of electronic waste has promoted increasing attention to modernizing sensing materials and devices. Especially, sensing devices featuring biodegradability and bioabsorbability are greatly desired. We therefore herein present a disposable sensor based on biodegradable flexible polylactic acid piezoelectret film (DS-PLA), which achieves significant longitudinal compressive and transverse tensile sensitivities and thus can act either as a pressure sensor or as a tensile sensor, extending its potential applications in wearable and implantable electronics. The core material-PLA piezoelectret film can be degraded in deionized water with a temperature of 170 °C in 11 h, which is of great significance for green and sustainable development. For longitudinal compressive sensing performance, a high quasi-static compressive sensitivity up to 1000 pC/N and a wide pressure detecting range of 0.03–62 kPa were obtained simultaneously. Most importantly, the compressive sensitivity does not show obvious deterioration after 1.08 million operation cycles at a pressure of 4.3 kPa, demonstrating good mechanical robustness. Transverse tensile sensitivities of S31 = 24 pC/N and S32 = 47 pC/N indicate that the short-circuit charge outputs upon stretching are significantly higher than that of the sensors based on traditional cellular polypropylene piezoelectret (~2 pC/N). Wearable DS-PLAs can be conformally attached to the surface of human skin to monitor human motions. We envision the sensor holds significant superiority in the next-generation wearable biosensors and implantable biomedical devices without maintenance and environmental damage.