Abstract:As a promising positive electrode material for high energy lithium-ion batteries, Li-rich manganese based cathode materials (LNCM) have a capacity over 250 mA h g(-1) but suffer from capacity fade and voltage decay during electrochemical cycling. Surface coating and bulk doping can improve the performance of LNCM from different aspects but both of them have shortcomings. Herein, we contrive to integrate the advantages of surface coating and bulk doping by YF3 modification. The phase transformation and gradient diffusion at the interface between the coating layer and bulk region were investigated by XRD, XPS, SEM, EDS and TEM. A LNCM material modified with 5 wt% YF3(0.05-YF3) shows an enhanced initial coulombic efficiency of 87.56% and an improved rate performance of 179.6 mA h g(-1) at 5C compared to 76.94% and 148.3 mA h g(-1) for the pristine, a discharge capacity of 217.9 mA h g(-1) and a retention of 85.2% after 150 cycles at 0.5C compared to 161.2 mAhg(-1),72.71% compared to the pristine. The improved performance can be attributed to the fact that part of Li2MnO3 had been activated during the YF3 modification and secondary calcination process, forming a spinel phase with three dimensional Li+ diffusion channels, which are beneficial to enhance rate performance. Besides, some F- ions diffused into the bulk region due to the gradient and bonded with TM, which are help to stabilize the structure. Further treatment at high temperature of the secondary calcination for the 0.05-YF3 modified materials show a lower voltage decay of 331.9 mV after 100 cycles at 0.5C compared to 608.6 mV for pristine, which further confirms the diffusion of F- and its effects on reducing the voltage decay and stabilizing the structure during cycling.

Unlocking the power of lithium trifluoride, LiMF3 (M = Mn, Co, Fe, Ni, and V), materials through DFT: a paradigm shift in electrode candidates for high-performance Li-ion batteries

Ordered LiNi0.5Mn1.5O4 Cathode in Bis(fluorosulfonyl)imide-Based Ionic Liquid Electrolyte: Importance of the Cathode-Electrolyte Interphase

Highly Fluorinated Interphases Enable High-Voltage Li-Metal Batteries

Unveiling the potential of lithium fluoride phosphate (Li 2 MPO 4 F, M = Fe, V, Mn) for the next generation of lithium-ion batteries: A comparative study based on first principles and molecular dynamic simulations

Ab initio study of lithium transition metal fluorophosphate cathodes for rechargeable batteries

Elucidating the Limit of Lithium Difluorophosphate Electrolyte Additive for High‐Voltage Li/Mn‐Rich Layered Oxide || Graphite Li Ion Batteries

Lithium intercalation mechanisms and critical role of multi-doping in LiFexMn2-x-yTiyO4 as high-capacity cathode material for Lithium-ion batteries

A theoretical investigation on the two-dimensional Fe/Mn tricarbides (XC 3 ) as promising electrode materials for lithium-ion batteries

Multicore-Shell Iron Fluoride @ Carbon Microspheres as Long-life Cathode for High-Energy Lithium Battery

A 3.90 V iron-based fluorosulphate material for lithium-ion batteries crystallizing in the triplite structure

Research on the synergistic effect of fluoroethylene carbonate and lithium difluoro(oxalato)borate in electrolyte on LiNi0.5Mn1.5O4-based high-voltage lithium-ion batteries

A first principle study of structural and electrical properties of novel Li2FeO3/Li2FeO2F Li-ion battery cathode material

Lithium Difluorophosphate As a Promising Electrolyte Lithium Additive for High-Voltage Lithium-Ion Batteries

LiF-Rich Interfaces and HF Elimination Achieved by a Multifunctional Additive Enable High-Performance Li/LiNi0.8Co0.1Mn0.1O2 Batteries.

A critical revelation of lithium ferromanganese phosphate (LMFP) performance in a Mn-rich cathode for Li-ion batteries using Fe equivalents to occupy a Mn site

A Promising Solid‐State Synthesis of LiMn 1‐ y Fe y PO 4 Cathode for Lithium‐ion Batteries

LiF-Rich Electrode-Electrolyte Interfaces Enabled by Bifunctional Electrolyte Additive to Achieve High-Performance Li/LiNi 0.8 Co 0.1 Mn 0.1 O 2 Batteries

Metal Fluoride Cathode Materials for Lithium Rechargeable Batteries: Focus on Iron Fluorides

Re-understanding the Function Mechanism of Surface Coating: Modified Li-rich Layered Li1.2Mn0.54Ni0.13Co0.13O2 Cathodes with YF3 for High Performance Lithium-Ions Batteries

Metal-Organic Framework-Derived Nanoconfinements of CoF<sub>2</sub> and Mixed-Conducting Wiring for High-Performance Metal Fluoride-Lithium Battery

First-principles calculations to investigate the impact of fluorine doping on electrochemical properties of Li-rich Li2MnO3 layered cathode materials