The effect of moisture on the structures and properties of lead halide perovskites: a first-principles theoretical investigation

Lei Zhang,Ming-Gang Ju,WanZhen Liang

DOI: https://doi.org/10.1039/c6cp01994c

IF: 3.3

2016-01-01

Physical Chemistry Chemical Physics

Abstract:The degradation mechanism of perovskite materials when exposed to moisture and sunlight has been fully explored.

chemistry, physical,physics, atomic, molecular & chemical

What problem does this paper attempt to address?

Ab initio study of the moisture stability of lead iodine perovskites

Yunqiu He,Si-Qin Wang,Xiong-Xiong Xue,Lixin Zhang,Keqiu Chen,Wu-Xing Zhou,Yexin Feng

DOI: https://doi.org/10.1088/1361-648X/aad4d0

2018-09-05

Abstract:The stability of hybrid lead iodine perovskite in a humid environment has been a major obstacle to developing long-term photovoltaic devices. However, understanding the detailed degradation mechanism of lead iodine perovskite in moisture is still challenging. Herein, using first-principles calculations, we show that embedded water molecules will facilitate the decomposition of lead iodine perovskite. Alloying FAPbI3 and CsPbI3 to form mixed-cation lead iodine perovskites not only can optimize the tolerance factor to obtain better phase stability, but also can improve the moisture stability of them. With the accumulation of water molecules in the perovskite lattice, the optical absorption spectra show a blue-shift and decreased intensity, and the moisture stabilities of lead iodine perovskites are further lowered. The iodine vacancy in lead iodine perovskites can facilitate the water molecule migration and thus is a disadvantage in improving the moisture stability of them, which should be minimized during perovskite growth. These findings provide new insight in understanding the poor moisture stability of lead iodine perovskites, which should be helpful for the future design and optimization of stable perovskite solar cells.
Imaging the Moisture-Induced Degradation Process of 2D Organolead Halide Perovskites

Jianbo Tang,Wenming Tian,Chunyi Zhao,Qi Sun,Chunyang Zhang,Hui Cheng,Yantao Shi,Shengye Jin

DOI: https://doi.org/10.1021/acsomega.1c06989

IF: 4.1

2022-03-16

ACS Omega

Abstract:Two-dimensional (2D) and quasi-2D Ruddlesden–Popper (RP) phase organolead halide perovskites are promising materials for both photovoltaic and optoelectronic devices. Although they are known to be more stable when exposed to moisture than their 3D counterpart, chemical degradation of these materials under moisture, which not only leads to a significant drop in device performance but also leads to lead leakage, yet remains one of the most serious hurdles for their practical applications. To gain insight into the degradation mechanism of 2D/quasi-2D perovskites under moisture conditions, the degradation pathway of 2D/quasi-2D (PEA)2(MA)n−1PbnI3n+1 (PEA = C6H5C2H4NH3+, MA = CH3NH3+, and n is the number of perovskite layers between adjacent organic spacer layers) perovskite single crystals (SCs) and thin film are explored. We observe the degradation process by mapping the photoluminescence of the 2D perovskites and demonstrate that the larger-n phases all directly degrade into the relative stable n = 1 phase and MAI and PbI2, which is a mechanism different from that in previous reports and further confirmed in the 2D perovskite thin film. This degradation process is also found to be independent of the boundary and morphology of the SCs. This discovery provides a new perspective for understanding the chemical degradation of the 2D perovskite materials and may inspire new solutions for improving their moisture stability.This article has not yet been cited by other publications.

chemistry, multidisciplinary
Study on the stability of organic–inorganic perovskite solar cell materials based on first principle

Xin-Feng Diao,Yan-lin Tang,Tian-yu Tang,Quan Xie,Kun Xiang,Gao-fu Liu

DOI: https://doi.org/10.1080/00268976.2019.1665200

2019-09-12

Molecular Physics

Abstract:In order to better understand and elucidate the structural stability of perovskite materials, the lattice parameters and tolerance factors of three crystal structures of perovskite materials are calculated based on the first principle of density functional theory. We find that the perovskite crystal structures are relatively stable and is consistent with the experimental facts as the tolerance factor 0.81 < T < 1.11. The elastic modulus of three crystal structures of MAPbI3, FAPbI3 and the elastic modulus of FA0.75Cs0.25Sn0.5PB0.5I3 are studied. By Voigt-Reuss-Hill approximation, the elastic properties such as bulk modulus, shear modulus, Young's modulus and Poisson's ratio are obtained. From the elastic modulus Cij, we can find that the other six kinds of crystal structures are relatively stable except for the orthogonal structure of MAPbI3 (c). The ductility and brittle toughness of the material are also discussed by B/G and Poisson's ratio. It is found that MAPbI3 (a) is the hardest and FAPBI3 (a) the weakest. Form the three-dimensional surface view of Young's modulus it is found that their dependence in three-dimensional direction is spherical for an isotropic system. The degree of deviation of the Young's modulus sphere reflects the anisotropy of crystal structures. The degree of elastic anisotropy of organic–inorganic perovskite materials follows the order of FAPbI3(c) > MAPbI3(a) > FA0.75 Cs0.25 Sn0.5Pb0.5I3 > FAPbI3(a) > MAPbI3(b) > MAPbI3(c) >FAPbI3(b). Furthermore, by the adsorption energies and density of states (DOS) of these seven crystals for water molecules, the reasons why perovskite materials are easily denatured in high humidity environment were explored. The results show that perovskite materials are easy to denaturate in high humidity environment.

chemistry, physical,physics, atomic, molecular & chemical
Mechanism of Interaction of Water above the Methylammonium Lead Iodide Perovskite Nanocluster: Size Effect and Water-Induced Defective States

Jie Huang,Bowen Wang,Hejin Yan,Yongqing Cai

DOI: https://doi.org/10.1021/acs.jpclett.3c02807

IF: 6.888

2024-01-12

The Journal of Physical Chemistry Letters

Abstract:Water is often viewed as detrimental to organic halide perovskite stability. However, evidence highlights its efficacy as a solvent during organic perovskite liquid synthesis. This paradox prompts an investigation into water's influence on perovskite nanoclusters. Employing first principle calculations and ab initio molecular dynamics simulations, surprisingly, we discover some subsurface layers of methylammonium lead iodide (MAPbI(3)) nanoclusters exhibit stronger relaxation than surface...

chemistry, physical,physics, atomic, molecular & chemical,nanoscience & nanotechnology,materials science, multidisciplinary
Comprehensive Understanding of Heat-Induced Degradation of Triple-Cation Mixed Halide Perovskite for a Robust Solar Cell

Jianming Yang,Xianjie Liu,Yuexing Zhang,Xuerong Zheng,Xiaoxiao He,Han Wang,Fangyu Yue,Slawomir Braun,Jinquan Chen,Jianhua Xu,Yanqing Li,Yizheng Jin,Jianxin Tang,Chungang Duan,Mats Fahlman,Qinye Bao

DOI: https://doi.org/10.1016/j.nanoen.2018.10.011

IF: 17.6

2018-01-01

Nano Energy

Abstract:The triple-cation mixed halide perovskite Cs-0.05(MA(0.17)FA(0.83))(0.95)Pb(I0.83Br0.17)(3) emerges as one of the most promising candidates for photovoltaics due to superior optoelectronic properties, but the thermal stability is still a major challenge for the viability of perovskite solar cells towards commercialization. Herein, we firstly explore the thermal response of the photovoltaic performances to access device physical changes. It is shown that the efficiency loss originates from decreased charge mobility, increased trap density and generation of PbI2 charge recombination centers near the interface. In-depth analysis of evolutions in morphology, chemical composition, dynamic and electronic structure of the perovskite layer at the nanometer scales indicates that it is initial dangling bonds and vacancies on the imperfect surfaces decrease the activation energy and cause the perovskite decomposition in a layer-by-layer pathway sequentially from the film surface to bulk. Based on the results, a strategy of surface passivation to improve the thermal stability is demonstrated and discussed. This work for the first time provides insights into the physical and chemical change of such triple-cation perovskite and indicates that more effort should be invested in surface treatment for enhancing perovskite device stability.
Water Dopant Control of Structural Stability and Charge Recombination of Perovskite Solar Cells: A First-Principles Study

Jing Fu,Mengying Li,Yuchong Kang,Kun Yang,Haibo Li,Jin Zhang,Wei Ma

DOI: https://doi.org/10.1016/j.apsusc.2022.155794

IF: 6.7

2022-11-26

Applied Surface Science

Abstract:Humidity is a key factor in affecting the long-term stability of perovskite solar cells. However, how water interacts with the perovskite film and influences the individual energy conversion process in perovskite solar cells remains virtually unexplored. By using ab initio molecular dynamics and nonadiabatic molecular dynamics, we reveal that the MAX-terminated surface is more susceptible to water erosion. The intrusion of water brings in severe lattice distortion, whose degree follows the law of MAPbI 3 > MAPbBr 3 > MAPbCl 3 , thereby leading to attenuation in optical absorbance. Unexpectedly, the carrier lifetimes of hydrated MAX-terminated systems are prolonged, while the PbX-terminated surfaces are largely unaffected. This is due to the dielectric shielding effect of invading water molecules, hindering electron-hole recombination. Our results shed light on a comprehensive understanding of the complex effect of humidity on the perovskite performance, rationalize the contradictory experimental observations, and provide novel insights for further optimization of renewable energy devices.

chemistry, physical,physics, applied, condensed matter,materials science, coatings & films
Improved Crystallinity and Self-Healing Effects in Perovskite Solar Cells Via Functional Incorporation of Polyvinylpyrrolidone

Yunjuan Niu,Dingchao He,Zhengguo Zhang,Jun Zhu,Tulloch Gavin,Polycarpos Falaras,Linhua Hu

DOI: https://doi.org/10.1016/j.jechem.2021.10.029

2022-01-01

Abstract:Air moisture is the key issue for perovskites which invades the films and accelerates the damage of devices. Here, polyvinylpyrrolidone (PVP) is introduced to the methylammonium lead iodide (MAPbI(3)) perovskite precursor to control crystal growth and endow the devices with self-healing ability in a moisture environment. The strong C = O center dot center dot center dot H-N hydrogen bonding interactions between PVP and MAPbI(3) was confirmed by nuclear magnetic resonance measurements. By introducing hydrogen bonding in the MAPbI(3)-based PSCs, we form a compact perovskite film of excellent electronic quality with a power conversion efficiency (PCE) of up to 20.32%. Furthermore, the O center dot center dot center dot H-N hydrogen bonding interactions at the grain boundaries suppress the decomposition of methylammonium cations and improve the recyclable dissolution-recrystallization of perovskite. As a result, the MAPbI(3)-PVP based cells exhibited striking moisture stability and self-healing behavior, with negligible decay in efficiency after 500 h of operation in high humidity (65% +/- 5% relative humidity) and rapid recovering ability after their removal from the humid environment. (C) 2021 Science Press and Dalian Institute of Chemical Physics, Chinese Academy of Sciences. Published by ELSEVIER B.V. and Science Press. All rights reserved.
A critical review on the moisture stability of halide perovskite films and solar cells

Bin Chen,Shurong Wang,Yuheng Song,Chengbo Li,Feng Hao

DOI: https://doi.org/10.1016/j.cej.2021.132701

IF: 15.1

2022-02-01

Chemical Engineering Journal

Abstract:In recent years, researchers have made incredible strides in raising the power conversion efficiency (PCE) to a certified PCE record of 25.5% for metal hybrid perovskite solar cells (PSCs). However, the degradation and instability of perovskite film has hindered its commercialization process. Achieving long life-span of PSCs remains to be a big challenge. As one of the notorious factors affecting the stability of PSCs, the moisture damage to the PSC devices cannot be neglected. Herein, the comprehensive effects of moisture on the halide perovskite films are discussed. First, we elucidate the peculiar structural properties of the hydrated perovskites and the corresponding degradation process. Then the carrier dynamics after water invasion are also elaborated including the free carrier density and mobility, decay kinetics and the absorption effect. We further recap the water-induced degradation through point defect processes in different hydrous compounds. On the basis of these analyses, recent measures taken to promote the moisture stability of perovskite thin films and solar cells are then summarized and discussed. Furthermore, the challenges and outlooks towards more stable PSCs are proposed. We believe this review will provide useful insights for future development of stable PSCs for commercial application.

engineering, chemical, environmental
Enhanced Moisture Stability of Cesium‐Containing Compositional Perovskites by a Feasible Interfacial Engineering

Nan Li,Zonglong Zhu,Qingshun Dong,Jiangwei Li,Zhanlue Yang,Chu-Chen Chueh,Alex K. -Y. Jen,Liduo Wang

DOI: https://doi.org/10.1002/admi.201700598

IF: 5.4

2017-01-01

Advanced Materials Interfaces

Abstract:The compositional perovskites have attracted broad attention due to the improved photovoltaic performance and enhanced stability compared with the single cation perovskite, such as methylammonium lead iodide and formamidinium lead iodide. In this study, the moisture stability of the widely used cesium and bromide-containing mixed perovskites is carefully studied by characterizing the morphology, crystallization, and device performance before and after the exposure to moisture. Though the mixed perovskites possess strong resistance to moisture in the ambient air, a rapid degradation is observed when the perovskites are exposed to a high relative humidity (RH) up to 70%. The degradation is evidenced by the obvious appearance of CsPbI3 phase along with needle-like morphology after several hours' storage in 70% RH. Moreover, to suppress the erosion of perovskites by the high-level moisture, an interfacial engineering is introduced with phenylethylammonium iodide (PEAI). The PEAI passivation not only shows a retarded degradation but also delivers an enhanced photovoltaic performance from 13% to > 17% with much improved stability under high-level moisture. The results imply the efficacy of interfacial engineering in fabricating high-efficiency and stable perovskite solar cells.
Moisture-triggered fast crystallization enables efficient and stable perovskite solar cells

Kaikai Liu,Yujie Luo,Yongbin Jin,Tianxiao Liu,Yuming Liang,Liu Yang,Peiquan Song,Zhiyong Liu,Chengbo Tian,Liqiang Xie,Zhanhua Wei

DOI: https://doi.org/10.1038/s41467-022-32482-y

IF: 16.6

2022-08-19

Nature Communications

Abstract:Abstract Understanding the function of moisture on perovskite is challenging since the random environmental moisture strongly disturbs the perovskite structure. Here, we develop various N 2 -protected characterization techniques to comprehensively study the effect of moisture on the efficient cesium, methylammonium, and formamidinium triple-cation perovskite (Cs 0.05 FA 0.75 MA 0.20 )Pb(I 0.96 Br 0.04 ) 3 . In contrast to the secondary measurements, the established air-exposure-free techniques allow us directly monitor the influence of moisture during perovskite crystallization. We find a controllable moisture treatment for the intermediate perovskite can promote the mass transportation of organic salts, and help them enter the buried bottom of the films. This process accelerates the quasi-solid-solid reaction between organic salts and PbI 2 , enables a spatially homogeneous intermediate phase, and translates to high-quality perovskites with much-suppressed defects. Consequently, we obtain a champion device efficiency of approaching 24% with negligible hysteresis. The devices exhibit an average T 80 -lifetime of 852 h (maximum 1210 h) working at the maximum power point.

multidisciplinary sciences
The Importance of Moisture in Hybrid Lead Halide Perovskite Thin Film Fabrication

Giles E. Eperon,Severin N. Habisreutinger,Tomas Leijtens,Bardo J. Bruijnaers,Jacobus J. van Franeker,Dane W. deQuilettes,Sandeep Pathak,Rebecca J. Sutton,Giulia Grancini,David S. Ginger,Rene A. J. Janssen,Annamaria Petrozza,Henry J. Snaith

DOI: https://doi.org/10.1021/acsnano.5b03626

IF: 17.1

2015-08-06

ACS Nano

Abstract:Moisture, in the form of ambient humidity, has a significant impact on methylammonium lead halide perovskite films. In particular, due to the hygroscopic nature of the methylammonium component, moisture plays a significant role during film formation. This issue has so far not been well understood and neither has the impact of moisture on the physical properties of resultant films. Herein, we carry out a comprehensive and well-controlled study of the effect of moisture exposure on methylammonium lead halide perovskite film formation and properties. We find that films formed in higher humidity atmospheres have a less continuous morphology but significantly improved photoluminescence, and that film formation is faster. In photovoltaic devices, we find that exposure to moisture, either in the precursor solution or in the atmosphere during formation, results in significantly improved open-circuit voltages and hence overall device performance. We then find that by post-treating dry films with moisture exposure, we can enhance photovoltaic performance and photoluminescence in a similar way. The enhanced photoluminescence and open-circuit voltage imply that the material quality is improved in films that have been exposed to moisture. We determine that this improvement stems from a reduction in trap density in the films, which we postulate to be due to the partial solvation of the methylammonium component and "self-healing" of the perovskite lattice. This work highlights the importance of controlled moisture exposure when fabricating high-performance perovskite devices and provides guidelines for the optimum environment for fabrication. Moreover, we note that often an unintentional water exposure is likely responsible for the high performance of solar cells produced in some laboratories, whereas careful synthesis and fabrication in a dry environment will lead to lower-performing devices.

materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology
Investigation of the Hydrolysis of Perovskite Organometallic Halide CH 3 NH 3 PbI 3 in Humidity Environment

Jiangtao Zhao,Bing Cai,Zhenlin Luo,Yongqi Dong,Yi Zhang,Han Xu,Bin Hong,Yuanjun Yang,Liangbin Li,Wenhua Zhang,Chen Gao

DOI: https://doi.org/10.1038/srep21976

IF: 4.6

2016-01-01

Scientific Reports

Abstract:Instability of emerging perovskite organometallic halide in humidity environment is the biggest obstacle for its potential applications in solar energy harvest and electroluminescent display. Understanding the detailed decay mechanism of these materials in moisture is a critical step towards the final appropriate solutions. As a model study presented in this work, in situ synchrotron radiation x-ray diffraction was combined with microscopy and gravimetric analysis to study the degradation process of CH 3 NH 3 PbI 3 in moisture and the results reveal that: 1) intermediate monohydrated CH 3 NH 3 PbI 3 ·H 2 O is detected in the degradation process of CH 3 NH 3 PbI 3 and the final decomposition products are PbI 2 and aqueous CH 3 NH 3 I; 2) the aqueous CH 3 NH 3 I could hardly further decompose into volatile CH 3 NH 2 , HI or I 2 ; 3) the moisture disintegrate CH 3 NH 3 PbI 3 and then alter the distribution of the decomposition products, which leads to an incompletely-reversible reaction of CH 3 NH 3 PbI 3 hydrolysis and degrades the photoelectric properties. These findings further elucidate the picture of hydrolysis process of perovskite organometallic halide in humidity environment.
Pathways of Water-Induced Lead-Halide Perovskite Surface Degradation: Insights from in Situ Atomic-Scale Analysis.

Joong Il Jake Choi,Luis K. Ono,Hunyoung Cho,Ki-Jeong Kim,Hyung-Been Kang,Yabing Qi,Jeong Young Park

DOI: https://doi.org/10.1021/acsnano.3c10611

IF: 17.1

2023-01-01

ACS Nano

Abstract:While organic-inorganic hybrid perovskites are emerging as promising materials for next-generation photovoltaic applications, the origins and pathways of perovskite instability remain speculative. In particular, the degradation of perovskite surfaces by ambient water is a crucial subject for determining the long-term viability of perovskite-based solar cells. Here, we conducted surface characterization and atomic-scale analysis of the reaction mechanisms for methylammonium lead bromide (MA-(CH3NH3)-PbBr3) single crystals using ambient-pressure atomic force microscopy (AP-AFM) and near-ambient-pressure X-ray photoelectron spectroscopy (NAP-XPS) in environments ranging from ultrahigh vacuum to 0.01 mbar of water vapor. MAPbBr(3 )single crystals, grown by a solution process, were mechanically cleaved under UHV conditions to obtain an atomically clean surface. Consecutive topography and friction force measurements in low-pressure water (p (water) approximate to 10(-5) mbar) revealed the formation of degraded patches, one atomic layer deep, gradually increasing their coverage until the surface was entirely covered at a water exposure of 4.7 x 10(4) langmuir (L). At the perimeters of these degraded patches, a higher friction coefficient was observed, along with an interstitial step height, which we attribute to a structure equivalent to that of the MA-Br terminated surface. Combined with NAP-XPS analysis, our results demonstrate that water vapor induces the dissociation of surface methylammonium ligands, eventually resulting in the depletion of the surface MA and the full coverage of hydrocarbon species after exposure to 0.01 mbar of water vapor.
Synergistic Role of Water and Oxygen Leads to Degradation in Formamidinium-Based Halide Perovskites

Juanita Hidalgo,Waldemar Kaiser,Yu An,Ruipeng Li,Zion Oh,Andrés-Felipe Castro-Méndez,Diana K LaFollette,Sanggyun Kim,Barry Lai,Joachim Breternitz,Susan Schorr,Carlo A R Perini,Edoardo Mosconi,Filippo De Angelis,Juan-Pablo Correa-Baena

DOI: https://doi.org/10.1021/jacs.3c05657

2023-11-02

Abstract:Mixed-cation metal halide perovskites have shown remarkable progress in photovoltaic applications with high power conversion efficiencies. However, to achieve large-scale deployment of this technology, efficiencies must be complemented by long-term durability. The latter is limited by external factors, such as exposure to humidity and air, which lead to the rapid degradation of the perovskite materials and devices. In this work, we study the mechanisms causing Cs and formamidinium (FA)-based halide perovskite phase transformations and stabilization during moisture and air exposure. We use in situ X-ray scattering, X-ray photoelectron spectroscopy, and first-principles calculations to study these chemical interactions and their effects on structure. We unravel a surface reaction pathway involving the dissolution of FAI by water and iodide oxidation by oxygen, driving the Cs/FA ratio into thermodynamically unstable regions, leading to undesirable phase transformations. This work demonstrates the interplay of bulk phase transformations with surface chemical reactions, providing a detailed understanding of the degradation mechanism and strategies for designing durable and efficient perovskite materials.
Insight into the Interaction between Perovskite and Water via In Situ PL Measurement

Yun Tang,Ruoche Wang,Weisong Wang,Yalou Xin,Xiaohu Ren,Ying Wei,Hudie Yuan

DOI: https://doi.org/10.1016/j.optmat.2024.115104

IF: 3.754

2024-02-20

Optical Materials

Abstract:Contrary to widely held view that water induces negative effect on lead halide perovskites, publications on active role of water in photoluminescence (PL) and stability of perovskites have been emerged recently. Until now, comprehensively understanding the interaction between perovskite and water is absolutely necessary for its highly correlation with the practical application and remains a significant challenge. In this study, we utilize in situ PL measurement, ex situ transmission electron microscopy, UV–vis spectroscopy and X-ray photoelectron spectroscopy to track and reveal the interaction of perovskite with water. For the organic-inorganic lead bromide perovskite, water induces amorphization, degradation of MAPbBr 3 , as well as formation of PbBrOH. As-obtained MAPbBr 3 @PbBrOH composites exhibit high PL quantum yield (QY) of 41.8–57.0% and robust water stability for the protection from PbBrOH. For cesium lead bromide perovskite, water facilitates the phase transition from non-luminescent Cs 4 PbBr 6 to luminescent CsPbBr 3 , and could also instigate the formation of PbBrOH. However, the water-induced Ostwald maturation of CsPbBr 3 and structure defects brought by the phase transition ultimately lead to the production of large CsPbBr 3 crystals or CsPbBr 3 @PbBrOH composites with ultralow PLQY. This work provides valuable insights into the interaction between perovskite and water, and holds important implications for comprehending the instability of lead halide perovskites.

materials science, multidisciplinary,optics
Abnormal Synergetic Effect of Organic and Halide Ions on the Stability and Optoelectronic Properties of a Mixed Perovskite via In Situ Characterizations

Mingzhu Long,Tiankai Zhang,Mingzhen Liu,Zefeng Chen,Chen Wang,Weiguang Xie,Fangyan Xie,Jian Chen,Gang Li,Jianbin Xu

DOI: https://doi.org/10.1002/adma.201801562

Abstract:The mixed cation lead mixed halide perovskite (MLMP) Csx FA1-x PbIy Br3-y is one of the most promising candidates for both single-junction and tandem solar cells due to its high efficiency and remarkable stability. However, the composition effect on thermal stability and photovoltaic performances has not yet been comprehensively investigated. Therefore, the interplay between composition, crystal structure, morphology, and optoelectronic properties under heat stress, is systematically elucidated here through a series of in situ characterizations. It is revealed for the first time that the FA+ and Br- release synchronously at first even under mild annealing. This leads to a serious FA- and Br-deficiency issue, with only 88.3% of Br and 90.2% of FA retained after annealing at 100 °C, which significantly magnifies the hysteresis, phase segregation, and instability issues. Finally, a trace amount of FA+ and Br- is introduced onto the post-annealed MLMP surface to compensate for the deficiency through vacancy filling. The degradation lifetime to 80% of the initial efficiency (t80 ) is improved from 504 to 1056 h and the hysteresis issue is also well resolved. This work highlights the importance of the synergetic composition effect of the organic cation and halide anion on stability and efficiency optimization for long-term applications.
Influence of intrinsic defects on the structure and dynamics of the mixed Pb–Sn perovskite: first-principles DFT and NAMD simulations

Qi Liu,Akang Li,Weibin Chu,Oleg V. Prezhdo,WanZhen Liang

DOI: https://doi.org/10.1039/d1ta09027e

IF: 11.9

2022-01-01

Journal of Materials Chemistry A

Abstract:The mixed tin (Sn) and lead (Pb) perovskite compositions have shown great potential in perovskite photovoltaic devices due to the significantly enhanced material stability and prolonged carrier lifetime, compared to the pure Sn halide perovskites.

materials science, multidisciplinary,chemistry, physical,energy & fuels
A study on the effects of mixed organic cations on the structure and properties in lead halide perovskites

Chao Wu,Daoyou Guo,Peigang Li,Shunli Wang,Aiping Liu,Fengmin Wu

DOI: https://doi.org/10.1039/c9cp06182g

2020-02-07

Abstract:Recently, organic-lead halide perovskites have emerged as strong competitors in photovoltaic and general optoelectronic applications owing to their remarkable characteristics, including high balance hole and electron mobility, strong absorption coefficient and long carrier lifetime. However, the commercial applicability of these materials is hampered by their relative lack of stability compared to established inorganic and organic semiconductors. It has been found that it is possible to tune the properties and stability of the organic-lead halide perovskite materials by site-substitution at A sites of the ABX3 perovskite structure. Here, organic cations (NH4+, HC (NH2)2+, and CH3CH2NH3+) were successfully incorporated in the methylammonium-based perovskite crystal to investigate the role of organic cation size on structure, optical features, thermal stability, and electrical transport properties. Powder X-ray diffraction results indicate that the size of organic cations can not only cause lattice strain by lattice contraction or dilation but also may induce phase transitions by octahedral tilting. Meanwhile, band gaps of these crystals show that organic cations could tune the band gap energy of the perovskites by changing the Pb-I bond angle, which agrees with previous reports. The result of thermogravimetric analysis indicates that thermal stability is related to the probability of HI formation, which is directly related to the acidity of the organic species. These results represent an important step to highlight the role of organic cations in hybrid perovskite materials, which will further benefit the fundamental understanding of materials and device optimization.
Moisture resistance in perovskite solar cells attributed to a water-splitting layer

Min Kim,Antonio Alfano,Giovanni Perotto,Michele Serri,Nicola Dengo,Alessandro Mezzetti,Silvia Gross,Mirko Prato,Marco Salerno,Antonio Rizzo,Roberto Sorrentino,Enrico Cescon,Gaudenzio Meneghesso,Fabio Di Fonzo,Annamaria Petrozza,Teresa Gatti,Francesco Lamberti

DOI: https://doi.org/10.1038/s43246-020-00104-z

2021-01-04

Communications Materials

Abstract:Abstract Commercialization of lead halide perovskite-based devices is hindered by their instability towards environmental conditions. In particular, water promotes fast decomposition, leading to a drastic decrease in device performance. Integrating water-splitting active species within ancillary layers to the perovskite absorber might be a solution to this, as they could convert incoming water into oxygen and hydrogen, preserving device performance. Here, we suggest that a CuSCN nanoplatelete/p-type semiconducting polymer composite, combining hole extraction and transport properties with water oxidation activity, transforms incoming water molecules and triggers the in situ p-doping of the conjugated polymer, improving transport of photocharges. Insertion of the nanocomposite into a lead perovskite solar cell with a direct photovoltaic architecture causes stable device performance for 28 days in high-moisture conditions. Our findings demonstrate that the engineering of a hole extraction layer with possible water-splitting additives could be a viable strategy to reduce the impact of moisture in perovskite devices.
Investigation of CH3NH3PbI3 degradation rates and mechanisms in controlled humidity environments using in situ techniques.

Jinli Yang,T. Kelly,Dianyi Liu,Braden D. Siempelkamp

DOI: https://doi.org/10.1021/nn506864k

IF: 17.1

2015-02-09

ACS Nano

Abstract:Perovskite solar cells have rapidly advanced to the forefront of solution-processable photovoltaic devices, but the CH3NH3PbI3 semiconductor decomposes rapidly in moist air, limiting their commercial utility. In this work, we report a quantitative and systematic investigation of perovskite degradation processes. By carefully controlling the relative humidity of an environmental chamber and using in situ absorption spectroscopy and in situ grazing incidence X-ray diffraction to monitor phase changes in perovskite degradation process, we demonstrate the formation of a hydrated intermediate containing isolated PbI6(4-) octahedra as the first step of the degradation mechanism. We also show that the identity of the hole transport layer can have a dramatic impact on the stability of the underlying perovskite film, suggesting a route toward perovskite solar cells with long device lifetimes and a resistance to humidity.

Medicine,Physics,Materials Science

The effect of moisture on the structures and properties of lead halide perovskites: a first-principles theoretical investigation

Ab initio study of the moisture stability of lead iodine perovskites

Imaging the Moisture-Induced Degradation Process of 2D Organolead Halide Perovskites

Study on the stability of organic–inorganic perovskite solar cell materials based on first principle

Mechanism of Interaction of Water above the Methylammonium Lead Iodide Perovskite Nanocluster: Size Effect and Water-Induced Defective States

Comprehensive Understanding of Heat-Induced Degradation of Triple-Cation Mixed Halide Perovskite for a Robust Solar Cell

Water Dopant Control of Structural Stability and Charge Recombination of Perovskite Solar Cells: A First-Principles Study

Improved Crystallinity and Self-Healing Effects in Perovskite Solar Cells Via Functional Incorporation of Polyvinylpyrrolidone

A critical review on the moisture stability of halide perovskite films and solar cells

Enhanced Moisture Stability of Cesium‐Containing Compositional Perovskites by a Feasible Interfacial Engineering

Moisture-triggered fast crystallization enables efficient and stable perovskite solar cells

The Importance of Moisture in Hybrid Lead Halide Perovskite Thin Film Fabrication

Investigation of the Hydrolysis of Perovskite Organometallic Halide CH 3 NH 3 PbI 3 in Humidity Environment

Pathways of Water-Induced Lead-Halide Perovskite Surface Degradation: Insights from in Situ Atomic-Scale Analysis.

Synergistic Role of Water and Oxygen Leads to Degradation in Formamidinium-Based Halide Perovskites

Insight into the Interaction between Perovskite and Water via In Situ PL Measurement

Abnormal Synergetic Effect of Organic and Halide Ions on the Stability and Optoelectronic Properties of a Mixed Perovskite via In Situ Characterizations

Influence of intrinsic defects on the structure and dynamics of the mixed Pb–Sn perovskite: first-principles DFT and NAMD simulations

A study on the effects of mixed organic cations on the structure and properties in lead halide perovskites

Moisture resistance in perovskite solar cells attributed to a water-splitting layer

Investigation of CH3NH3PbI3 degradation rates and mechanisms in controlled humidity environments using in situ techniques.