Abstract:With the advantages of a high theoretical capacity, proper working voltage, and abundant reserves, silicon (Si) is regarded as a promising anode for lithium-ion batteries. However, huge volume expansion and low electronic conductivity impede the commercialization of Si anodes. We devised a one-step, vacuum-assisted reactive carbon coating technique to controllably produce micrometer-sized nanoporous silicon confined by homogeneous N-doped carbon nanosheet frameworks (), achieved by the solid state reaction of a commercial bulk precursor and the subsequent evaporation of byproducts. The graphitization degree, C and N contents of the carbon shell, as well as the porosity of Si can be regulated by adjusting the synthetic conditions. A rational structure can mitigate volume expansion to maintain structural integrity, enhance electronic conductivity to facilitate charge transport, and serve as a protected layer to stabilize the solid electrolyte interphase. The anode enables a stable cycling performance with 95.68% capacity retention for 4000 cycles at 5 A g–1. Furthermore, a flexible 2D/3D architecture is designed by conjugating with MXene. Lithiophilic homogenize Li nucleation and growth, evidenced by structural evolutions of @NCNF deposited Li. The application potential of and @NCNFs is estimated via assembling full cells with LiNi0.8Co0.1Mn0.1O2 and LiNi0.5Mn1.5O4 cathodes. This work offers a method for the rational design of alloy-based materials for advanced energy storage.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsnano.1c11098.Experimental section; XRD pattern and XPS spectra of Mg2Si and C3N4; ID/IG values, C and N contents, N2 adsorption/desorption isotherms, pore size distributions, TEM, HRTEM, and SAED of ; XRD, XPS, SEM and EDS mapping images of Nano-Si; charge/discharge curves of Nano-Si and anodes for LIBs at different rates; digital photograph (electrode and separator), SEM, thickness and thickness changes of Nano-Si and anodes before and after cycles; GITT and diffusion coefficients of and ; XRD, SEM, and EDS mapping images of NCM and LNMO; charge/discharge curves and capacity retentions of a full cell with Nano-Si and anodes at different rates (NCM and LNMO cathodes); EIS curves of a cycled full cell with Nano-Si and anodes (NCM and LNMO cathodes); XRD, SEM, and EDS mapping images of MAX; digital photograph of MXene solution; XRD, Raman, XPS, SEM, EDS mapping images, and digital photograph of MXene; SEM of @NCNFs; SEM of structural evolutions of Cu foil and @NCNFs deposited Li with different area capacities; voltage profiles on Cu and @NCNFs; EIS and SEM of Cu, @NCNFs, , and @ for Li metal anode after cycles; charge/discharge curves and capacity retentions of a full cell with and @ anodes at different rates (NCM and LNMO cathodes); EIS curves of a cycled full cell with and @ anodes (NCM and LNMO cathodes) (PDF)This article has not yet been cited by other publications.

Verticality Bridging Multilayered MXenes by NCNTs for Rapid Electron/Ion Bi‐Continuous Transport

Achieving Quick Charge/discharge Rate of 3.0 V S−1 by 2D Titanium Carbide (mxene) Via N-doped Carbon Intercalation

Composite of Two-Dimensional Titanium Carbonitride Mxene and Nano-Sulfur As Cathode for Li-S Batteries

Li-ion Uptake and Increase in Interlayer Spacing of Nb4C3 MXene

Concentrated Laminate Structure in Dense MXene Monoliths Promises High‐Capacity Sodium Storage

Nitrogen‐Doped Graphene‐Like Carbon Intercalated MXene Heterostructure Electrodes for Enhanced Sodium‐ and Lithium‐Ion Storage

Sandwich-like Na0.23TiO2 nanobelt/Ti3C2 MXene composites from a scalable in situ transformation reaction for long-life high-rate lithium/sodium-ion batteries

Layered CoS@NC in situ loaded onto Ti3C2Tx MXene as an efficient lithium-ion battery anode

In-situ synthesis of niobium-doped TiO2 nanosheet arrays on double transition metal MXene (TiNbCTx) as stable anode material for lithium-ion batteries

In situ growth of MOF-derived nitrogen-doped carbon nanotubes on hollow MXene spheres for K-ion storage

Atomic Sulfur Covalently Engineered Interlayers of Ti3C2 MXene for Ultra‐Fast Sodium‐Ion Storage by Enhanced Pseudocapacitance

CNT–MXene Ultralight Membranes: Fabrication, Surface Nano/Microstructure, 2D–3D Stacking Architecture, Ion-Transport Mechanism, and Potential Application as Interlayer for Li–O2 Batteries

Nb2CTx MXene: High Capacity and Ultra-Long Cycle Capability for Lithium-Ion Battery by Regulation of Functional Groups

Co Decoration of Molybdenum Sulfide and Carbon for Improving Lithium Ion Capacity of Large Monolayer MXene Cathodes

In-Plane Mesoporous 3D Flower-Like Mo2Ti2C3Clx MXene Anodes for Li-Ion Batteries: From Structure to Performance

MXene-based porous and robust 2D/2D hybrid architectures with dispersed Li3Ti2(PO4)3 as superior anodes for lithium-ion battery

Nb2CT MXene: High capacity and ultra-long cycle capability for lithium-ion battery by regulation of functional groups

Hierarchical Heterostructures of MXene and Mesoporous Hollow Carbon Sphere for Improved Ion Accessibility and Rate Performance

Surfactant-free self-assembled MXene/carbon nanotubes hybrids for high-rate sodium- and potassium-ion storage

One-Step, Vacuum-Assisted Construction of Micrometer-Sized Nanoporous Silicon Confined by Uniform Two-Dimensional N-Doped Carbon toward Advanced Li Ion and MXene-Based Li Metal Batteries

Partial Atomic Tin Nanocomplex Pillared Few-Layered Ti3C2Tx MXenes for Superior Lithium-Ion Storage