Abstract:It is crucial to reveal the energy conversion and heat and mass transfer characteristics in the electric arc furnaces (EAFs). In this paper, a transient mathematical model was built to adequately capture the distribution of multi-physical fields in EAF. The numerical modeling method was verified against brown corundum smelting experiment data. In addition, the influence on the brawn corundum smelting process of the typical operating parameters has been examined, and the major problems which limit the performance improvement of smelting were analyzed. Moreover, four indicators were proposed to comprehensively evaluate the EAF performance, consisting of liquid volume fraction β, energy efficiency η, temperature rise index ς, and temperature uniformity index ξ. Furthermore, the optimal combination of operating parameters was selected automatically based on the back propagation (BP) neural network predicting model and non-domestic sorting genetic algorithm II (NSGA-II). The results showed that the local overheating phenomenon is serious and that homogenizing the energy distribution in the furnace is the key to improving the melting performance. Increasing electrode immersion and voltage can significantly increase the rate of heat and mass transfer. In the case of ψ = 0.75, υ = 0.6, when χ is increased from 0.2 to 0.6, τmax is shortened by 13.3% and ηmax is increased by 12.0%. While with ψ = 0.75 and χ = 0.4, τmax is reduced by 36.0% when υ increases from 0.2 to 1.0, but ηmax is also decreased by 7.0%. It was found that decreasing the height diameter ratio will improve the overall EAF smelting performance, but it also increases the area of heat loss. In the case of χ = 0.4, υ = 0.6, ξave and ηmax improved by 3.1 and 14.5%, respectively, when ψ decreases from 1.0 to 0.5. The EAF performances are considerably enhanced in comparison to the operating basic parameters (ψ = 0.75, χ = 0.4 and υ = 0.6), subject to optimal operation parameters (ψ = 0.61, χ = 0.59 and υ = 0.59). In this case, τmax and ςmax reduced by 6.2 and 4.1%, respectively, while ηmax and ξave increased by 6.8 and 1.0%, respectively.

Prediction of burden distribution and electrical resistance in submerged arc furnaces using discrete element method modelling

VFM-based Modelling of Burden Descent under Varying Burden Charging Matrix for Blast Furnace

Ferrochrome Production in a Submerged Electric Arc Furnace: Fundamental Analysis Based upon the FactSage‐Macro Program Approach

A finite-element method model for a ferromanganese and silicomanganese pilot furnace

Prediction of silicon content of alloy in ferrochrome smelting using data-driven models

Modeling of Arcing, Scrap Melting, and Temperature Evolution in the Refractory of a Lab‐Scale Direct Current‐Electric Arc Furnace

Three-dimensional computational fluid dynamics analysis of an electric submerged arc furnace

Modeling, Optimization and Estimation in Electric Arc Furnace (EAF) Operation

A Comparative Study of the Performance of Different Particle Models in Simulating Particle Charging and Burden Distribution in a Blast Furnace Within the DEM Framework

Reliability Study of Super-Ellipsoid DEM in Representing the Packing Structure of Blast Furnace

Modeling and Energy Efficiency Analysis of Ferro-Silicon Submerged Arc Furnace under Flexible AC Power Supply in Balanced Steady State

Simulation of Scrap Melting Process in an AC Electric Arc Furnace: CFD Model Development and Experimental Validation

Modeling Framework for the Simulation of an Electric Smelting Furnace Considering Freeze Lining Formation

Modeling of Thermochemical Behavior in an Industrial-Scale Rotary Hearth Furnace for Metallurgical Dust Recycling

Optimizing Elemental Transfer Predictions in Submerged Arc Welding via CALPHAD Technology under Varying Heat Inputs: A Case Study into SiO2-Bearing Flux

Dynamic Optimization, State Estimation and Control of Electric Arc Furnace Operation

Real Time Modelling of Burden Components Distribution During Hopper Outflow and Burdening Via a Rotating Chute

The study of heat-mass transfer characteristics and multi-objective optimization on electric arc furnace

Thermophysical Model for Online Optimization and Control of the Electric Arc Furnace

Mathematical model for design of optimized multi-component slag for electroslag remelting

A Robust Static Model of Basic Oxygen Furnace for Analyzing Emerging Steelmaking Scenarios