Drying kinetic, quality, energy and exergy performance of hot air-rotary drum drying of green peas using adaptive neuro-fuzzy inference system
Mohammad Kaveh,Yousef Abbaspour-Gilandeh,Guangnan Chen
DOI: https://doi.org/10.1016/j.fbp.2020.08.011
IF: 5.105
2020-11-01
Food and Bioproducts Processing
Abstract:A novel hot air-rotary drum dryer has been developed and used for drying green peas.Reducing the temperature and speed of rotation reduced the drying quality.Exergy efficiency increased by increasing the rotary speed and drying temperature.ANFIS model was able to predict the energy and exergy performance with a high accuracy.The purpose of this paper was to study the drying kinetic, quality, energy and exergy performance of green peas in a hot air-rotary drum dryer using the Adaptive Neuro-Fuzzy Inference System (ANFIS) model. The effect of air temperature and rotary rotation speed was examined. The drying tests were performed at three air temperature levels of 40, 55 and 70 °C and three rotation speeds of 5, 10 and 15 rpm. The modeling of kinetic, quality (color, shrinkage, and rehydration ratio), energy and exergy indices of the green pea drying was also investigated using the adaptive neuro-fuzzy inference system (ANFIS). The results showed that the energy utilization rate of the process varied in the range of 0.0121–0.1556 kJ/s. The minimum and maximum values of energy utilization ratio were respectively obtained in the drying conditions at 70 °C and rotation speed of 15 rpm, and at 40 °C and rotation speed of 15 rpm. Reducing the drying temperature and speed of rotation reduced the quality properties. Minimum values of color (△E) and shrinkage was 64.95 ± 1.67 and 39.19 ± 1.05, respectively. The exergy loss rate and average exergy efficiency varied from 0.02 to 0.11 kJ/s and from 0.5434 to 0.8382, respectively. The average rate of exergy improvement potential increased with increasing air temperature and rotary rotation speed. The highest R2 value for the prediction of moisture ratio, energy utilization, energy utilization ratio, exergy loss and exergy efficiency with the ANFIS model was 0.9996, 0.9999, 0.9995, 0.9989 and 0.9996, respectively.Download : Download high-res image (175KB)Download : Download full-size imageSchematic diagram of hot air- rotary drum dryer chamber. (1) Air blow system (1 hp/3000 rpm), (2) Airflow control system, (3) Air heating chamber. (4) Out let temperature sensor (k- tyoe thermocouple), (5) Airflow transfer tube, (6) Control panel, (7) Motor for rotating the drum, (8) Anemometer for air velocity measurement, (9) Drying chamber, (10) Feed hopper, (11) Air exit opening, (12) Rotary drum, (13) Digital Balance, (14) Thermometer, (15) Computer and (16) Chassis.
food science & technology,biotechnology & applied microbiology,engineering, chemical