Improved flux and anti-fouling performance of a photocatalytic ZnO membrane on porous stainless steel substrate for microalgae harvesting

Amar K. Salih,Lisa Aditya,Fatima Matar,Long D. Nghiem,Cuong Ton-That

DOI: https://doi.org/10.1016/j.memsci.2023.122405

IF: 9.5

2024-01-02

Journal of Membrane Science

Abstract:Photocatalytic self-cleansing ZnO membranes were developed and used for pre-concentrating microalgae solution prior to harvesting. The inorganic membranes were fabricated via two different methods: (i) direct deposition of ZnO onto a porous stainless steel substrate and (ii) post-growth oxidation of a deposited metallic Zn layer. Systematic surface characterisation revealed a thin layer of homogeneous, crystalline ZnO on the porous membrane. Direct ZnO deposition resulted in a thicker layer with higher UV light absorption capability compared with the post-growth oxidization method. The ZnO coating made the membrane surface highly hydrophilic, resulting in two-fold increase in water permeability compared to the base stainless steel substrate. The high hydrophilicity of the ZnO-coated membrane also led to an increase in the permeate flux of the microalgae solution by up 100 %, making it suitable for microalgae pre-concentration. Upon UV light irradiation, the ZnO membrane demonstrated self-cleansing capability due to the photocatalytic activity of the ZnO coating layer. After 30 minutes of UV irradiation, the ZnO membrane could achieve 60 % permeability recovery after complete fouling. No recovery was observed with the base stainless steel membrane, which was used as the control.

engineering, chemical,polymer science