Abstract:The development of a nonenzymatic electrochemical sensor with nanomolar detection of H2O2 has been highly desirable due to its wide applications in bioanalysis. In this paper, the glassy carbon electrode (GCE) modified by carbon-doping molybdenum carbide (β-Mo2C/C/GCE) was simply fabricated by simple drop-coating method and used to detect H2O2 in pretreated human serum. The β-Mo2C/C hierarchical structure is obtained by a one-step pyrolysis of the single-crystal [(H2L)2(Mo8O26)]n [L = N,N′-bis(3-pyridin)-1,4-xylyenediamine] and constructed from amounts of nanoparticles (∼10 nm) with a mesoporous size distribution of 42.46 nm. At room temperature, the β-Mo2C/C/GCE sensor has a high sensitivity of 247.73 μA mM–1 cm–2, a low detection limit of 90 nM (signal/noise = 3), as well as a wide linear range of 0.27 μM–2.39 mM, and it shows better electrocatalytic performance of H2O2 than the molybdenum oxide (obtained from the same precursor) modified glassy carbon electrode (α-MoO3/GCE). Such outstanding electrocatalytic performances are related to the synergistic effect of the inherent characteristics of the β-Mo2C/C material. The satisfactory test results of the human serum samples indicate that the β-Mo2C/C/GCE sensor can be used as a good candidate for real-time detection of H2O2 in biological, food, and environmental fields.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsanm.0c01106?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsanm.0c01106</a>.Chemical reagents, characterization instruments, synthesis of single crystal, crystallography details including data and structure refinement, selected bond lengths and angles, modified electrodes (fabrication and measurements), peak assignments of IR spectrum, TG curves, XPS spectra, SEM images, optimization of experimental conditions, plots of current versus time and current versus volume, comparison of electrodes, additional references (<a class="ext-link" href="/doi/suppl/10.1021/acsanm.0c01106/suppl_file/an0c01106_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Fabrication of CaTiO3 modified glassy carbon electrode-based hydrogen peroxide sensor

Electrodeposition of Monodispersed Cu Nanoparticles on Poly-P-Aminobenzene Sulfonic Acid Functionalized Glassy Carbon Electrode and the Electrocatalytic Reduction Toward H2o2

A Hydrogen Peroxide Sensor Prepared By Electropolymerization Of Pyrrole Based On Screen-Printed Carbon Paste Electrodes

Electrochemical Detection of Hydrogen Peroxide at the Sputtered Titanium Oxide Electrode

TiO2/MWCNT/Nafion-Modified Glassy Carbon Electrode as a Sensitive Voltammetric Sensor for the Determination of Hydrogen Peroxide

TiO 2 -doped LTA zeolite as a sensitive non-enzymatic electrochemical sensor toward hydrogen peroxide detection

Non‐enzymatic hydrogen peroxide sensor based on palladium‐decorated poly(thionine) modified glassy carbon electrode

Template-synthesizing Hollow Cubic CeO2/Co3O4 Heterostructure As Electrocatalysts for Sensing Hydrogen Peroxide

Electrochemical detection of hydrogen peroxide using micro and nanoporous CeO2 catalysts

TiO 2 sol-gel derived amperometric biosensor for H 2 O 2 on the electropolymerized phenazine methosulfate modified electrode

Electrochemical Sensor for Hydrogen Peroxide Based on Prussian Blue Electrochemically Deposited at the TiO2-ZrO2–Doped Carbon Nanotube Glassy Carbon-Modified Electrode

A Core-Shell Au@TiO2 and Multi-Walled Carbon Nanotube-Based Sensor for the Electroanalytical Determination of H2O2 in Human Blood Serum and Saliva

Detection of Hydrogen Peroxide Vapors Using Acidified Titanium(IV)-Based Test Strips

Carbon-Doping Mesoporous β-Mo 2 C Aggregates for Nanomolar Electrochemical Detection of Hydrogen Peroxide

A Glassy Carbon Electrode Modified with a Nanocomposite Consisting of Carbon Nanohorns and Poly(2-Aminopyridine) for Non-Enzymatic Amperometric Determination of Hydrogen Peroxide

Hydrogen Peroxide Electrochemical Detection for the Development of Protein Film-Modified Sensor

Pd Nanoparticle-Modified Electrodes for Nonenzymatic Hydrogen Peroxide Detection

Electrocatalysis Of Hydrogen Peroxide At A Screen Printed Electrode Modified By Titanic Sol-Gel Doping With Copper Hexacyanoferrate Nanoparticles

Fabrication of a Hydrogen Peroxide Biosensor Based on a Self-Assemble Composite Oxide Film

Fabrication of ultrafine PtPd alloy/ionic liquid-carbon dots nanocomposites modified flexible carbon fiber as enzyme-free amperometric sensing for H 2 O 2 in living cells

A Reagentless Hydrogen Peroxide Biosensor Based on the Coimmobilization of Thionine and Horseradish Peroxidase by Their Cross-Linking with Glutaraldehyde on Glassy Carbon Electrode