Abstract:Mechanical pressing is widely used for producing high-quality vegetable oil in industry. However, mechanical pressing process faces a challenge from meeting the industrial demand for high yield with low energy consumption. Hence, the objective of this study was to optimize mechanical oil extraction process from Camellia oleifera seeds by maximizing the yield and minimizing the energy consumption. A Box-Behnken design of response surface methodology is adopted for the experiments of mechanical oil extraction from C. oleifera seeds. The effects of experimental factors namely moisture content (0-9% w.b.), applied pressure (10-45 MPa), pressing temperature (40-100 degrees C) and extraction time (10-40 min) on yield and energy consumption were investigated by modeling the oil extraction process. An analysis of variance (ANOVA) revealed that moisture content, applied pressure and extraction time significantly effect on yield while applied pressure, pressing temperature, and extraction time have an obvious influence on energy consumption. In addition, the oil extracted under the processing conditions investigated was validated to be of acceptable quality. The Pareto fronts based on multiobjective genetic algorithm provides a set of optimal process parameters to obtain sustainable end products. Practical Application Moisture content, applied pressure, pressing time, and pressing temperature are primary processing conditions affecting oil extraction from C. oleifera seeds during the mechanical process. The use of inappropriate processing parameters may lead to low yield and high-energy consumption. Understanding the mechanisms of oil extraction process thoroughly while taking important parameters into consideration is vital for the process to be efficient. This can be obtained by modeling oil extraction process using both experimental and theoretical methods. In this article, how these factors affect the yield and energy consumption of the system were investigated by modeling the oil extraction process. Processing conditions were optimized by multiobjective optimization technique based on NSGA-II. The oil extracted under the processing conditions investigated was of acceptable quality. The data collected during this study can be utilized to design the equipment and to obtain sustainable end products.

Semi-Continuous Microwave-Assisted Oil Extraction and Enzymatic Hydrolysis of Butia Odorata Seeds: Efficient Recovery of Oil and Fermentable Sugars in a Sequential Method

Recovery of Oil with Unsaturated Fatty Acids and Polyphenols from Chaenomelessinensis (Thouin) Koehne: Process Optimization of Pilot-Scale Subcritical Fluid Assisted Extraction

Microbial Fermentation Simultaneous Extraction Processing of Oil and Protein from Soybean

Microwave-assisted Aqueous Enzymatic Extraction of Oil from Isatis Indigotica Seeds and Its Evaluation of Physicochemical Properties, Fatty Acid Compositions and Antioxidant Activities

Enhancing the valorization efficiency of Camellia oil extraction wastes through sequential green acid pretreatment and solid-state fermentation-based enzymatic hydrolysis

Maximizing fermentable feedstocks from Camellia oleifera seed oil extraction residues: Green pretreatment and enzymatic hydrolysis for effective valorization

Extrusion process to enhance the pretreatment effect of ionic liquid for improving enzymatic hydrolysis of lignocellulosic biomass

Microwave-Assisted vs. Conventional Extraction of Moringa oleifera Seed Oil: Process Optimization and Efficiency Comparison

Decrypting solvent‐free microwave as a dual green extraction: studying simultaneous extraction of essential oil and phenolics from the same biomass – valorization and outperforming traditional approaches

Effect of Experimental Parameters on the Extraction of Grape Seed Oil Obtained by Low Pressure and Supercritical Fluid Extraction

A Method for Extracting Oil from Cherry Seed by Ultrasonic-Microwave Assisted Aqueous Enzymatic Process and Evaluation of Its Quality

Aqueous Enzymatic Process Assisted by Microwave Extraction of Oil from Yellow Horn (xanthoceras Sorbifolia Bunge.) Seed Kernels and Its Quality Evaluation

Supercritical Fluid Extraction of Phenolic Compounds from Mango (Mangifera indica L.) Seed Kernels and Their Application as an Antioxidant in an Edible Oil

Simultaneous extraction of sunflower oil and active compounds from olive leaves using pressurized propane

Innovative Açaí Seed Pre-treatment: Energized Dispersive Guided Extraction for Small-Scale Fixed-Bed Reactor Fast-Pyrolysis

Toward Sustainable Wax Extraction from the Saccharum officinarum L. Filter Cake Byproduct: Process Optimization, Physicochemical Characterization, and Antioxidant Performance

Effects of different alcoholic extraction conditions on soybean oil yield, fatty acid composition and protein solubility of defatted meal

Microwave -Assisted Aqueous Enzymatic Extraction of Oil from Tomato Seed and Evaluation of Its Physicochemical Properties

Optimization of Aqueous Enzymatic Microwave Assisted Extraction of Macadamia Oil and Evaluation of Its Chemical Composition, Physicochemical Properties, and Antioxidant Activities

Application of Cavitation System to Accelerate Aqueous Enzymatic Extraction of Seed Oil from Cucurbita Pepo L. and Evaluation of Hypoglycemic Effect.

Optimization of Mechanical Oil Extraction Process from Camellia Oleifera Seeds Regarding Oil Yield and Energy Consumption