Abstract:The study effectively optimized the transesterification process of Jatropha oil to fatty acid methyl ester using response surface methodology (CCD) and Taguchi orthogonal method, leading to enhanced efficiency and product quality. The optimization of five process parameters was conducted to predict the biodiesel yield (%) from the transesterification of Jatropha oil. The procedure was made easier with the use of a nanocatalyst made from calcium oxide obtained from snail shells using the hydrothermal technique. The RSM approach yielded an optimal FAME of 94.10% under specific conditions: a methanol to oil ratio of 5 : 1, catalyst weight of 1.5 w/w, reaction temperature of 50 °C, reaction duration of 45 minutes, and an agitation speed of 250 rpm across 32 experimental trials. On the other hand, the Taguchi method predicted a higher FAME yield of 86.36% using specific operational parameters. These parameters included a methanol to oil ratio of 4 : 1, catalyst weight of 0.5 w/w, reaction temperature of 60 °C, reaction duration of 25 minutes, and an agitation speed of 200 rpm. These parameters were determined through 16 experimental trials. The RSM technique yielded impressive results with a determined coefficient of determination ( R 2 ) of 0.9943, adjusted R 2 of 0.9838, predicted R 2 of 0.8470, and a coefficient of variance (CV) of 0.65. On the other hand, the Taguchi method had coefficients of 0.8994, 0.7483, and 1.95. The FAME yield of RSM was slightly higher, but the Taguchi method was much more cost-efficient. The analysis of variance (ANOVA) results showed that the methanol to oil ratio had the highest influence on the yield, accounting for 49.61% of the variation. This highlights the significant impact of this factor on the overall process. The study highlights the significance of utilizing advanced techniques such as TOA and RSM, which are known for their effectiveness. The study aims to enhance the yield and efficiency of the transesterification process, thereby increasing the overall production of fatty acid methyl ester from Jatropha oil. This innovative approach efficiently generates biodiesel from renewable resources, like Jatropha oil, in a manner that is both environmentally friendly and maximizes the effectiveness of the process parameters.

Comprehensive analysis of in-situ transesterification for madhuca biodiesel: from synthesis to life cycle assessment

Optimization of biodiesel production process for mixed nonedible oil (processed dairy waste, mahua oil, and castor oil) using response surface methodology

Optimisation, experimental validation and thermodynamic study of the sequential oil extraction and biodiesel production processes from seeds of Sterculia foetida

Optimized biodiesel production from mixed non-edible oils using advanced computational techniques and a novel bifunctional liquified catalyst: Compatibility assessment in IC engines

Multi-response and multi-criteria decision-making optimization of transesterification reaction for biodiesel production based on critic weight determination method

Kinetic studies on the extraction of oil from a new feedstock (Chukrasia tabularis L. seed) for biodiesel production using a heterogeneous catalyst

Effectiveness of RSM based Central Composite Design for optimization of in-situ biodiesel production process from castor seeds

Modeling and optimization of transesterification of Jatropha oil to fatty acid methyl ester: application of response surface methodology (CCD) and Taguchi orthogonal method

Biodiesel production and selected fuel qualities from prospective non-edible oils: Hevea brasiliensis, Madhuca longifolia, Azadirachta indica, and Gossypium hirsutum

Biodiesel production and exploring properties of Datura stramonium L. oil with its optimization using combined approaches—Taguchi, grey relational analysis, and response surface methodology

Production and testing of mahua oil–based biodiesel synthesized through heterogeneous catalyst using experimental and numerical method

Experimental and numerical analysis to enhance the thermodynamic properties and biofuel stability: Sapindus mukorossi

Production of Biodiesel from Mixed Castor Seed and Microalgae Oils: Optimization of the Production and Fuel Quality Assessment

A comparative assessment of microbial biodiesel and its life cycle analysis

Application of Life Cycle Assessment Tool on Biodiesel Production: Assessing the Environmental Impact of Biodiesel

Response Surface Methodology Optimization of Lipase-Catalyzed Transesterification Ofjatropha CurcasL. Seed Oil for Biodiesel Production

Comparative Life-Cycle Assessment of Microalgal Biodiesel Production Via Various Emerging Wet Scenarios: Energy Conversion Characteristics and Environmental Impacts

Process optimization of one-step direct transesterification and dual-step extraction-transesterification of the Chlorococcum-Nannochloropsis consortium for biodiesel production

Sustainable Production of Biodiesel from Novel and Non-Edible Ailanthus altissima (Mill.) Seed Oil from Green and Recyclable Potassium Hydroxide Activated Ailanthus Cake and Cadmium Sulfide Catalyst

Pilot scale production of biodiesel from Azolla oil via heterogeneous catalysis and diesel engine analysis: kinetic and techno-economic analysis considerations

Modeling and global optimization of biodiesel synthesis using hybrid response surface methodology‐crow search algorithm: Case study of papaya seed waste oil utilization