Abstract:Li-rich and Mn-based layered oxides are the most promising candidates for next-generation high energy density cathode materials. However, inherent problems including poor rate performance, continuous capacity degradation, and voltage fading hinder their commercial utilization. Herein, a lattice- and interfacial-modified Li1.2Mn0.54Co0.13Ni0.13O2 with a pristine-layered bulk structure, Na- and S-doped transition phase, and epitaxially grown Na2Mn (SO4)2 (C2/c symmetry) layer were constructed by Na2S treatment. The monoclinic Na2Mn(SO4)2 not only acts as an interface protective layer, alleviating the harmful electrode–electrolyte reactions, but also promotes formation of oxygen vacancy in the layered structure, enhancing reversibility of oxygen redox. The Na and S surface lattice doping leads to enhanced Li+ diffusion and alleviates the chance of oxygen release. With the positive effects provided by the stable interfacial layer and lattice modification, the modified cathodes with moderate Na2S treatment shows alleviated capacity and voltage decay and enhanced electrochemical kinetics. Especially, the washed cathode with 3 wt % Na2S treatment delivers a discharge specific capacity of 305 at 0.1 C and 219 mA h g–1 at 1 C, as well as 93.15% capacity retention and 88.20% voltage retention after 200 cycles at 1 C.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c08797?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c08797</a>.Rietveld refinement patterns using powder XRD of LMCN, LMCN-NS1, LMCN-NS3, LMCN-NS6, and WLMCN-NS3 samples; summary of structural refinement of the samples by a Rietveld method; HRTEM and FFT images of LMCN-NS3; the cross-section SEM image and corresponding Ni, Co, Mn, Na, S, and O distribution on the cross-sectioned particle for LMCN-NS3; EPR spectra of LMCN and LMCN-NS3; initial charge/discharge profiles of LMCN, LMCN-NS1, LMCN-NS3, and LMCN-NS6 at 0.1 C; cyclic performance of LMCN, LMCN-NS1, LMCN-NS3, and LMCN-NS6 at 1 C; initial charge/discharge profiles of LMCN, LMCN-N3, LMCN-S3, and LMCN-NS3 at 0.1 C; rate capability of LMCN, LMCN-N3, LMCN-S3, and LMCN-NS3; cyclic performance of LMCN, LMCN-N3, LMCN-S3, and LMCN-NS3 at 1 C; average voltage of discharging process for LMCN, LMCN-NS3, and W LMCN-NS3 at 1 C; XPS spectra of Mn 2p, Ni 2p, Co 2p, S 2p, Na 1s, and O 1s for LMCN and WLMCN-NS3 with different etching times; CV curves of the LMCN and WLMCN-NS3; and corresponding detailed data of Rs, Rct, σω, and DLi+ of the LMCN and WLMCN-NS3, respectively, for 1st and 300th (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c08797/suppl_file/am0c08797_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Superior Na-Storage Properties of Nickel-Substituted Na 2 FeSiO 4 @C Microspheres Encapsulated with the In Situ -Synthesized Alveolation-like Carbon Matrix

Rapid mechanochemical synthesis of high-performance Na4Fe2.94Al0.04(PO4)2(P2O7)/C cathode material for sodium-ion storage

Engineering Heterostructure-Incorporated Metal Silicates Anchored on Carbon Nanotubes for Highly Durable Lithium Storage

Na 2 S Treatment and Coherent Interface Modification of the Li-Rich Cathode to Address Capacity and Voltage Decay

Fabrication of a Sandwiched Core Carbon Sphere@Na 3 V 2 (PO 4 ) 2 O 2 F@N-Doped Carbon Cathode for Superior Sodium-Ion Batteries

Ni 3 S 2 Nanoparticles Anchored on d-Ti 3 C 2 Nanosheets with Enhanced Sodium Storage

Homologous Heterostructured NiS/NiS2@C Hollow Ultrathin Microspheres with Interfacial Electron Redistribution for High‐Performance Sodium Storage

Confining homogeneous Ni0.5Co0.5Se2 nanoparticles in Ti3C2T MXene architectures for enhanced sodium storage performance

Size Controlling and Surface Engineering Enable NaTi2(PO4)3/C Outstanding Sodium Storage Properties

Self-standing Na-storage anode of Fe2O3 nanodots encapsulated in porous N-doped carbon nanofibers with ultra-high cyclic stability

Fe 2 VO 4 Nanoparticles Anchored on Ordered Mesoporous Carbon with Pseudocapacitive Behaviors for Efficient Sodium Storage

In Situ Construction of (NiCo)3Se4 Nanobeads Embedded in N-Doped Carbon 3D Interconnected Networks for Enhanced Sodium Storage

Mesoporous Nickel Sulfide Microsphere Encapsulated in Nitrogen, Sulfur Dual‐Doped Carbon with Large Subsurface Region for Enhanced Sodium Storage

High-Voltage Na0.76Ni0.25- x/2Mgx/2Mn0.75O2- xFx Cathode Improved by One-Step In Situ MgF2 Doping with Superior Low-Temperature Performance and Extra-Stable Air Stability

Interface-Driven Pseudocapacitance Endowing Sandwiched CoSe 2 /N-Doped Carbon/TiO 2 Microcubes with Ultra-Stable Sodium Storage and Long-Term Cycling Stability

Confining Homogeneous Ni0.5Co0.5Se2 Nanoparticles in Ti3C2Tx MXene Architectures for Enhanced Sodium Storage Performance

Carbon‐Encapsulated Ni 3 Se 4 /CoSe 2 Heterostructured Nanospheres: Sodium/Potassium‐Ion Storage Anode with Prominent Electrochemical Properties

Structure Modulation and Performance Optimization of P2-Na0.7Mn0.75Fe0.25-x-yNixCoyO2 Through a Synergistic Substitution of Ni and Co for Fe

Encapsulating Highly Crystallized Mesoporous Fe3O4 in Hollow N-doped Carbon Nanospheres for High-Capacity Long-Life Sodium-Ion Batteries

Metal–Organic Framework Derived Ultrafine Sb@Porous Carbon Octahedron via In Situ Substitution for High-Performance Sodium-Ion Batteries

In Situsynthesis Of A Nickel Concentration Gradient Structure Of Ni-Rich Lini(0.8)Co(0.15)Al(0.05)O(2)With Promising Superior Electrochemical Properties At High Cut-Off Voltage