Abstract:Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, Ahead of Print. Low-cost hybrid-reinforced magnesium metal matrix composite (HMMC) materials present a revolutionary category of materials achieved by combining two or more distinct reinforcing elements within the magnesium (Mg) matrix. The main focus of this research is to fabricate Mg-based HMMCs with exceptional mechanical and other characteristics by utilizing Mg substrate AZ61A as the base material. To achieve this, nano-titanium carbide (TiC), nano-silicon carbide (SiC), and fly ash (FA) were selected as hybrid reinforcements, and the friction stir processing technique was employed for their incorporation. The microstructural, thermal, mechanical, wear, and fracture properties of synthesized HMMCs were carefully examined using a conventional testing approach. The findings demonstrate that the grain size of the base AZ61A alloy was measured at 32 μm, whereas the AZ61A/FA/TiC/SiC composite exhibited a remarkable reduction to 3.5 μm. Notably, this reduction in grain size leads to simultaneous enhancement in mechanical properties. The microhardness, ultimate tensile strength, and ultimate compressive strength of the developed HMMC showed an impressive increase, measuring 2.09 times, 2.75 times, and 2.10 times higher, respectively, compared to their initial values of the base material. Moreover, a significant enhancement in wear resistance was also observed, attributed to the increased hardness and homogenous hybrid reinforcement dispersion into the HMMCs. In addition, it was evident that the synergistic combination of different reinforcement particulates in Mg-based alloy improves overall fracture resistance and catastrophic failure and mitigates crack propagation.

Preparation of glass fiber-reinforced polyphenylene sulfide/magnesium hybrid based on micro-arc oxidation by hot pressing molding

Experimental study on properties and structure of magnesium alloy/PC/ABS hybrid materials prepared by hot-press molding technology

Development of AZ91D Magnesium Alloy-Graphene Nanoplatelets Composites Using Thixomolding Process

Highly Enhanced Joint Strength of Direct-Injection-moulded Polyphenylene Sulphide-Magnesium Composite by PEO Coated Interface

Interface needle structure induced high-performance aluminum alloy/PPS hybrids

Micro-nano interfacial mechanical interlocking structure-property of the ultrasonic-assisted hot press molded polypropylene/aluminum alloy hybrid

Simple hot water treatment to form nanostructures for the preparation of polyphenylene sulfide-aluminum alloy hybrids

Fabrication and mechanical properties of novel CFRP/Mg alloy hybrid laminates with enhanced interface adhesion

Graphene Nanoplatelets Reinforced Magnesium Matrix Composites Fabricated by Thixomolding

Mechanical Behavior of a Hybrid Reinforced Magnesium Composite Fabricated by Pressure Infiltration Method

Mechanical Properties of Glass Fiber and Liquid Crystalline Polymer Reinforced Polypropylene Hybrid Composites Toughened with Elastomers

Microstructural Evolution in Graphene Nanoplatelets Reinforced Magnesium Matrix Composites Fabricated Through Thixomolding Process

Mechanical property and structure of polycarbonate /aluminum alloy hybrid prepared by ultrasound-assisted hot-pressing technology

Improving the interfacial bonding strength and suppressing shrinkage porosity of 6061Al/GFRTP hot-pressing joints via interfacial modification

Exploring the mechanical, metallurgical, and fracture characteristics of hybrid-reinforced magnesium metal matrix composite synthesized via friction stir processing route

Synergistic strengthening mechanism and microstructural evolution of Al-Zn-Mg-Cu/ Al2O3/Y2O3 hybrid nanocomposite via mechanical alloying and hot pressing

Influence of silane coupling agents on the interfacial structure and properties of modified polypropylene/aluminum alloy composites prepared by hot-press molding

Preparation and Performance of the Magnesium Matrix Composite Reinforced with Al2O3-SiO2 Short Fibers

Melt Compounding and Mechanical Properties of Polyphenylene Sulfide/Low Melting-Temperature Glass Composites

Effects of surface treatments and bonding types on the interfacial behavior of fiber metal laminate based on magnesium alloy

Surface pre-oxidation for enhancing laser assisted joining between carbon fiber reinforced thermoplastic composites and AZ31B Mg alloy