Abstract:Hydrophilic silica (SiO2) nanoparticles (average size=7nm), which act as inorganic acids at low pH (<2), were added together with a PEO–PPO–PEO triblock copolymer dispersant to a random disulfonated poly(arylene ether sulfone) copolymer in the potassium salt (SO3−K+) form in order to control permeation and rejection characteristics of the homopolymer. The dispersants (shell) absorbed on the surface of SiO2 nanoparticles (core) formed a distinctive core–shell structure. The PEO units located at the outside of the dispersant formed complexes with SO3−K+ groups of BPS-20 via ion–dipole interactions. These interactions induced a compatible binary system following the Flory–Fox equation associated with glass transition temperature (Tg) depression and prevented extraction of the water-soluble dispersant even under aqueous conditions. The ion–dipole interaction, combined with hydrogen bonding between SiO2 and the dispersant, caused SiO2 nanoparticles to be well distributed within the BPS-20 matrix up to a limit of 1wt.% of SiO2 and minimized the formation of non-selective cavities within the matrix's hydrophilic water channels. The resulting BPS-20_SiO2 nanocomposites showed improved salt rejection and reduced ionic conductivity. These trends are analogous to those of disulfonated copolymer systems, with polar groups creating hydrogen bonding or acid–base complexation with SO3−K+ groups in BPS copolymers. Well dispersed SiO2 nanoparticles in highly water-permeable desalination membranes are expected to result in an increase in salt rejection but very little change in water permeability. The addition of nanoparticles to desalination membranes may offset the permeability-selectivity tradeoff observed in polymer membranes. Above 1wt.%, SiO2 nanoparticles increased both the interchain distance between polymer chains and the water uptake. However, the increased hydrophilicity due to high SiO2 content did not yield improved water permeation of the nanocomposite membranes. The SiO2 nanoparticles acted as barriers, hindering water passage (restrictive diffusion) and lowering water permeability. Meanwhile, acidic hydroxyl groups (OH2+) on the SiO2 surface in the sulfonate matrix led to improved ionic conductivity, but NaCl rejection capability decreased because the concentration of SO3−K+ was diluted by highly absorbed water molecules, resulting in weakened Donnan exclusion. The mechanical properties and chlorine resistance of all BPS-20_SiO2 nanocomposites were comparable to those of BPS-20.

Water and salt transport properties of pentiptycene-containing sulfonated polysulfones for desalination membrane applications

Ionic Hyperbranched Poly(amido-amine)-Incorporated Nanofiltration Membranes for High-Efficiency Dye Desalination

Sulfonated Polyaryletherketone with Pendant Benzimidazole Groups for Proton Exchange Membranes

Tailoring the Selectivity of Quasi-Pims Nanofiltration Membrane Via Molecular Flexibility of Acyl Chloride Monomers for Desalination from Dye Effluents

Disulfonated Poly(arylene ether sulfone) Random Copolymers Containing Hierarchical Iptycene Units for Proton Exchange Membranes

Advances in Membrane Materials: Desalination Membranes Based on Directly Copolymerized Disulfonated Poly(Arylene Ether Sulfone) Random Copolymers

Water and salt transport properties of zwitterionic poly (arylene ether ketone) for desalination membrane applications

Hydrophilic Silica Additives for Disulfonated Poly(arylene Ether Sulfone) Random Copolymer Membranes

Elevating the water/salt selectivity of polybenzimidazole to the empirical upper bound of desalting polymers by marrying N-substitution with chlorination

Preparation, Characterization And Acid/Alkali Stabilities Of Aromatic Polyesteramide-Based Composite Membranes For Water Desalination

Hyperbranch-Crosslinked S-SEBS Block Copolymer Membranes for Desalination by Pervaporation

Synthesis of robust interface-anchored composite PVA/PSU/epoxy membrane for highly efficient pervaporation in concentrated brine desalination

Investigating the Impact of the Sulfonation Degree in Sulfonated Polyphenylsulfone (sPPSU) on PES/sPPSU Polymer Blend Membranes

Fundamental Salt and Water Transport Properties in Directly Copolymerized Disulfonated Poly(Arylene Ether Sulfone) Random Copolymers

Preparation and Properties of Sulfonated Poly(phthalazinone ether ketone) Membranes for Electrodialysis

Salt-resistant solar still based on hollow sphere porous ionic polymers for desalination

Disulfonated Poly(Arylene Ether Sulfone) Random Copolymer Blends Tuned for Rapid Water Permeation Via Cation Complexation with Poly(Ethylene Glycol) Oligomers

Highly improved permeation property of thin-film-composite polyamide membrane for water desalination

Hydrophilic and Anti-Fouling Polyethersulfone Ultrafiltration Membranes with Poly(2-Hydroxyethyl Methacrylate) Grafted Silica Nanoparticles As Additive

Polyphosphazene membrane for desulfurization: Selecting poly[bis(trifluoroethoxy) phosphazene] for pervaporative removal of thiophene

Electrospun Nanofibrous Polyphenylene Oxide Membranes for High-Salinity Water Desalination by Direct Contact Membrane Distillation