Abstract:Two-stage single-phase inverter system has found many applications in distributed generators and grid-connected systems. However, the existence of double-line frequency ripple on the dc-bus voltage due to single-phase inverter's operation has given rise to some design and reliability issues. Some of these are the degradation in the quality of inverter's output voltage and shortening of dc-bus capacitor's lifetime. The problem is rooted in the controller design of the front-end dc–dc converter, which is often designed based on a simplified mathematical model of the dc–dc converter that fails to account for some complex phenomena, such as system's nonlinearities and circuit parameter variations due to temperature and aging effects. In this paper, a disturbance-observer-based control is proposed where these unmodeled effects are treated in the form of lumped disturbance and compensated for in a feed-forward manner. The major advantage of this control solution is that only minimal plant information is needed for controller design and that a decoupled composite controller can be realized, where the feedback compensator is designed to meet certain stability criteria while the disturbance-observer-based feed-forward compensator is designed to handle fast transient events. A prototype of a dual-active-bridge (DAB) dc–dc converter implemented with disturbance-observer-based control is constructed to verify its effectiveness. Experimental results show that the dynamic response of the DAB converter is significantly improved and the double-line frequency ripple on the dc-bus voltage is effectively suppressed by the proposed control solution.

A DC Voltage Robust Control Strategy of Boost Converter Based on Load Impedance and Input Voltage Observation

A Digital Dual-Mode Lqr Optimal Controller for Boost Converter over A Wide Operation Range

Data-Driven Adaptive Extended State Observer-Based Model-Free Disturbance Rejection Control for DC–DC Converters

Dual-Mode Lqr-Feedforward Optimal Control for Non-Minimum Phase Boost Converter

Backstepping Control Of A Dc-Dc Boost Converters Under Unknown Disturbances

Robust Voltage Control of Floating Interleaved Boost Converter for Fuel Cell Systems

Robust Adaptive Flatness Based Control For Non-Ideal Boost Converter In Fuel Cell Electric Vehicles

State observation control strategy of bidirectional resonant DC/DC converter in building DC system

An Output Voltage Tracking Control Method With Overcurrent Protection Property for Disturbed DC–DC Boost Converters

Improved Control Strategy for Stand-Alone Distributed Generation System under Unbalanced and Non-Linear Loads

Robust Time-Delay Control for the DC–DC Boost Converter

Stabilization Of Dc-Dc Buck Power Converter Feeding A Mixed Load Using Passivity-Based Control With Nonlinear Disturbance Observer

Large-Signal Stability of Interleave Boost Converter System With Constant Power Load Using Sliding-Mode Control

Robust Control for DC-DC Buck Converters Based on Fully Actuated System Theory

Robust Adaptive Control of Interleaved Boost Converter for Fuel Cell Application

Nonlinear Disturbance Observer Based Sliding Mode Control for PWM-based DC-DC Boost Converter Systems

Robust Sliding-Mode Control Design for a Voltage Regulated Quadratic Boost Converter

Nonlinear Disturbance Rejection Control for a Buck-Boost Converter with Load Uncertainties

Disturbance-Observer-Based DC-Bus Voltage Control for Ripple Mitigation and Improved Dynamic Response in Two-Stage Single-Phase Inverter System

Disturbance Observer-based Finite-time Control for DC-DC Converter Feeding Constant Power Loads with Unknown Load Variation

DC-Link Voltage Regulation of Grid-Connected Converters Using Linear Disturbance Observer.