Durability properties of concrete containing copper heap leach residue as aggregates: experimental and analytical assessments

Sanjida Khair,Faiz Uddin Ahmed Shaikh,Prabir Kumar Sarker
DOI: https://doi.org/10.1080/21650373.2024.2397718
2024-09-04
Journal of Sustainable Cement-Based Materials
Abstract:This paper investigates durability related properties of concretes containing copper heap leach residue (CHLR) as partial replacement of natural fine and coarse aggregates. The use of CHLR as aggregates in concretes promotes the reduction of the dependance on natural aggregates, upcycling of the waste as aggregates and the reduction of carbon footprint associated with natural aggregate productions. In this study, CHLR was washed, dried, and sieved to separate fine aggregate and coarse aggregate, and concretes were prepared with a cement content of 400 kg/m 3 and water-cement ratio of 0.435 by replacing 25-75% natural fine and coarse aggregates. The concrete containing 50% CHLR as a partial replacement of natural CA and FA gained compressive strength of 52.9 and 54.0 MPa; drying shrinkage of 662 and 538 με; volume of permeable voids of 6.2 and 5.7%; 1485 and 2640 coulomb of charge passed in chloride permeability; and primary sorptivity coefficients of 4.0 × 10 −3 and 4.3 × 10 −3 mm/sec 0.5 at 180 days, respectively. In contrast, these properties for the control specimens at the same age were 59.1 MPa, 394 με, 5.19%, 1280 coulomb, and 2.5 × 10 −3 mm/sec 0.5 , respectively. The compressive strength and durability aspects declined in concretes using 75% CHLR coarse and fine aggregates. Existing analytical models for durability related properties of concrete containing natural aggregates are compared to that of the concretes using CHLR. Finally, backscattered electron images coupled with energy dispersive x-ray spectroscopy of the CHLR concretes were analyzed to understand the pore refinement, interfacial transition zones, microcracks, and hydration products influencing the durability aspects.
construction & building technology,materials science, multidisciplinary,green & sustainable science & technology
What problem does this paper attempt to address?