Abstract:<p>When improving track design, a better understanding of the track's damage modes is needed, and the railway industry is then dependent on the availability of accurate simulations of the dynamic vehicle–track interaction. In the present study, the vertical dynamic interaction between a travelling railway vehicle and a slab track is simulated in the time domain by using an extended state-space vector approach. A three-dimensional slab track model is launched where the rails are modelled using Rayleigh–Timoshenko beam elements and the concrete panel and roadbed are represented by using either shell or solid finite elements. From the parameterised track model, which is developed in Abaqus using Python scripts, the system matrices are exported to Matlab where the simulation of the dynamic vehicle–track interaction is performed. A complex-valued modal superposition technique is employed, which reduces the computational cost of the simulation. In a post-processing step, calculated wheel–rail contact forces from the dynamic analysis are used as input to the Abaqus track model where various track responses are evaluated. In particular, the time history of principal stresses is determined at critical locations in the concrete panel. Also the influence of the speed of the vehicle on the wheel–rail contact forces, and the influence of a transverse culvert below the track (modelled as a local increase of the foundation bedding modulus) on the track stiffness variation at the rail level, are investigated. A mesh convergence study for a range of track responses has been conducted including investigations of when to use linear or quadratic elements and shell or solid elements. Finally, the presented three-dimensional models have been compared to an alternative two-dimensional model to determine in what situations a two-dimensional model is sufficient.</p>

A vehicle/track/soil model using co-simulation between multibody dynamics and finite element analysis

2D and 3D soil finite/infinite element models: modelling, comparison and application in vehicle-track dynamic interaction

On the interest of integrating vehicle dynamics for the ground propagation of vibrations: the case of urban railway traffic

Soil Models and Vehicle System Dynamics

Modelling of vehicle-track related dynamics: a development of multi-finite-element coupling method and multi-time-step solution method

A Parallel Coupling Framework for DEM-MBD: Model Verification and Application

A comparison of track model formulations for simulation of dynamic vehicle–track interaction in switches and crossings

Saturated Ground Vibration Analysis Based on a Three-Dimensional Coupled Train-Track-Soil Interaction Model

Using high-fidelity discrete element simulation to calibrate an expeditious terramechanics model in a multibody dynamics framework

Improving vehicle dynamics employing individual and coordinated sliding mode control in vehicle stability, active front wheel steering and active rear wheel steering systems in co-simulation environment

Development of a Multibody Dynamics Simulation Tool for Tracked Vehicles (Part I, Efficient Contact and Nonlinear Dynamic Modeling)

Field-scale Testing and Numerical Investigation of Soil-Boulder Interaction under Vehicular Impact Using FEM and Coupled FEM-SPH Formulations

Dynamic modelling and experimental validation of a dynamic track stabiliser vehicle–track spatially coupling dynamics system

Validation of a new road and contact model for vehicle–soft soil terrain interaction through an elaborate modelling of the FED-Alpha vehicle

Simulation of vertical dynamic vehicle–track interaction using a three-dimensional slab track model

Simulation of Train-Turnout Coupled Dynamics Using a Multibody Simulation Software

Fully three-dimensional analysis of high-speed train–track–soil-structure dynamic interaction

Time Varying Load Course Model for Co-Simulation of Multibody Dynamics and Finite Element

A new contact and road model for multi-body dynamic simulation of wheeled vehicles on soft-soil terrain

Research on Co-simulation and Test of Semi-active Suspension

Modeling Method of Underwater Vehicle Dynamic System Based on Simulink and Fluent Co Simulation