Abstract:A novel pre-collision attitude adjustment (PCAA) modulation based on angular velocity and quaternions control is developed to more controllable and reliably adjust the non-spherical hopping rover's trajectory on small bodies. This corresponds to a hopping trajectory planning (HTP) framework that addresses inherent technical challenges, including attitude-trajectory coupled features, hard-to-depicting near-truth gravity and continues dynamical contact models, difficult-to-predetermine collision times with the small bodies’ surface, and complex judgments regarding whether the period of attitude adjustment is sufficient in current hops. Two main contributions are proposed, focusing on modeling and planning. To achieve a more realistic modeling of the rover's motion, its attitude-trajectory coupling dynamic model is researched, including a ground-truth irregular gravity model and continuous dynamical contact model. Additionally, a collision detection method based on the local surface smoothing technique is proposed for rapid and exact switching between the ballistic and contact motions for the subsequent planning purpose. On the other hand, redundancy planning and binary event-trigger techniques are combined for handling unpredictable available dimensions of optimization variables of PCAA-based HTP, which arise from the indeterminate scale of collision times and potential deficiency in ballistic flight time required for completing attitude maneuvers. Specifically, the solution space is preset to guarantee the unchanging dimensions of the design variables, which are activated or deactivated by coupling binary event variables for each dimension. These newly introduced events are triggered by comparing the realistic rebound time of the current hop with the necessary time for attitude maneuver, which is accurately computed by designing a first-order sliding mode controller. This approach enables an equivalent and easily implementable version of the problem to be obtained. Logically and numerically, the application of PCAA modulation is found to significantly enlarge or contract the area of the reachable region of the hopping rover and contribute to improving the convergence and reducing the relative final position error of the hopping trajectory planning problem.

Underactuated Motion Planning and Control for Jumping With Wheeled-Bipedal Robots

Stable and Fast Planar Jumping Control Design for a Compliant One-Legged Robot

Sprinting Motion Planning for Planar Bipedal Robots Based on Driving Coordination between the Knee and Ankle Joints

Untethered Quadrupedal Hopping and Bounding on a Trampoline

Efficient Motion Planning Based on Kinodynamic Model for Quadruped Robots Following Persons in Confined Spaces

Design of a Jumping Control Framework with Heuristic Landing for Bipedal Robots

Hopping Motion on Heavy-Legged Bipedal Robot Based on SLIP Model and Whole Body Control

Hierarchical Jumping Optimization for Hydraulic Biped Wheel-Legged Robots

Vertical hopping control of hydraulically actuated single-legged robot based on SLIP

Design and dynamic analysis of jumping wheel-legged robot in complex terrain environment

Planning and Execution of Dynamic Whole-body Locomotion for a Wheeled Biped Robot on Uneven Terrain

Design and Control of a Bio-inspired Wheeled Bipedal Robot

CDM-MPC: An Integrated Dynamic Planning and Control Framework for Bipedal Robots Jumping

Planning and Control of Forward Jumping Movement of Humanoid Robot

Dynamic Hopping Height Control of Single-Legged Hopping Robot

Bionic Jumping of Humanoid Robot via Online Centroid Trajectory Optimization and High Dynamic Motion Controller

Trajectory Planning for Hopping Rover on Small Bodies under Pre-Collision Attitude Adjustment Modulation

An Optimal Motion Planning Framework for Quadruped Jumping

Optimization-based dynamic motion planning and control for quadruped robots

Rapid and Reliable Quadruped Motion Planning with Omnidirectional Jumping

Optimal Motion Planning of a One-Legged Hopping Robot