Abstract:In this paper, a Finite-Element (FE) numerical investigation on timber-to-timber joints and composite beams with inclined self-tapping screws (STSs) is presented. Based on past experimental data and numerical literature efforts, full 3D solid FE models of selected geometrical and mechanical configurations of technical interest are implemented in ABAQUS software package and analysed under static loading conditions. The typical push-out samples include GL24h timber members with several types (WT-T-8.2, 190 mm and 220 mm their length), layouts (2 + 2, 4 + 4, 2 + 2 X-shaped) and inclination of screws (up to ±45°). For the full-scale beam samples in bending (8 m their span), composite systems consisting of GL24h timber beam, wooden plank, spruce floorboards and STSs are investigated. There, the STS joints take the form of two-rows or X-shaped connections, respectively (45° or 90° their inclination), including four screw types and different spacing. In both the push-out and full-scale cases, simple modelling approaches are taken from the ABAQUS library and adapted to the timber-to-timber structural system under investigation, so as to explore their structural performance in the elastic and post-damage phases, up to failure. A key role in the typical FE models is assigned to input material properties and mechanical contacts, including damage constitutive laws so as to reproduce possible local failure phenomena in the timber or steel components, as well as cohesive damage interactions for the joints. The presented FE models are calibrated in accordance with past research studies, and validated – for the examined structural typology – against experimental results available in literature. Comparative calculations are hence presented, based on the collected numerical, experimental and analytical estimations for the selected samples. As shown, the examined modelling approach can reasonably capture the expected performance of timber-to-timber joints and composite systems.

Characterization of steel T-stub compressing timber parallel to the grain component

Experimental Dynamic Characterization of a New Composite Glubam-Steel Truss Structure

Experimental Studies on Roof Trusses Made of Glubam

Axially Loaded Single Threaded Rod Glued in Glubam Joint

Experimental Research on Novel RPC-steel Composite Connections for Prefabricated Glubam-Concrete Composite Beams

The Flexural Behavior of Cross Laminated Bamboo and Timber (CLBT) and Cross Laminated Timber (CLT) Beams

Experimental Studies on Bolted Glubam Connections

Axial load-deformation behavior and fracture characteristics of bolted steel to laminated timber and glubam connections

In-plane testing and hysteretic modeling of steel-spline cross-laminated timber diaphragm connection with self-tapping screws

Axial compression of steel–timber composite column consisting of H-shaped steel and glulam

Experimental and nonlinear analytical of the flexural performance of timber-filled steel tubular composite beams

Compressive behaviour of novel timber-filled steel tubular (TFST) columns

Mechanical properties of timber-concrete connections with steel tube connectors

Mechanical behavior of Glass fiber‐reinforced polymer‐timber‐steel tube‐concrete composite columns under axial compression

Axial compressive performance of cruciform timber-encased steel composite columns: Experimental investigation and buckling analysis through 3D laser scanning

Numerical analysis of timber-to-timber joints and composite beams with inclined self-tapping screws

Load-slip Behaviour of Glue Laminated Timber Connections with Glued-in Steel Rod Parallel to Grain

Glubam Roof Truss with Riveted Glubam Connections Adopting Thin-Walled Steel Tube: Experiment, Modeling, and Model-Updating

Finite Element Modeling on Shear Performance of Grouted Stud Connectors for Steel-Timber Composite Beams

Bolted steel to laminated timber and glubam connections: Axial behavior and finite-element modeling

Numerical Investigation of a Sustainable Composite Connection