Abstract:Considering the fact that the acoustic attenuation increases with the carrier frequency, the attention shifts towards the low-frequency ultrasonic waves in the field of ultrasonic nondestructive testing and structural health monitoring of highly attenuative materials. However, low-frequency ultrasonic waves may sharply reduce the imaging resolution, although it can propagate longer distance. When an ultrasonic primary longitudinal wave tone burst propagates through an elastic solid with quadratic nonlinearity, it results in the generation of the quasi-static component (QSC). The QSC has advantages of low attenuation and better sound beam directivity, so it is expected to be a novel tool for non-destructive testing of highly attenuative materials. Therefore, aimed at detecting defects and improving the imaging quality in highly attenuative materials, a novel synthetic aperture focusing technique in the time domain combined with nonlinear ultrasonic QSC is proposed. In this study, experimental examinations were carried out to evaluate the imaging performance of the proposed method and low-frequency ultrasonic waves, in which a pulse-echo transducer is used to detect the QSC pulse generated by a primary longitudinal wave. The imaging results indicate that the proposed method has significant advantages over low-frequency ultrasonic waves in terms of visual presentation of defects. The effect of the duration of the tone burst on imaging quality is also investigated, and the results show that the imaging quality is optimal when the cycle number meets the requirement for the maximum response of QSC. This study would open new perspectives for the research on ultrasonic imaging in highly attenuative materials.

Achieving Selective Damage Interrogation and Sub-Wavelength Resolution in Thin Plates with Embedded Metamaterial Acoustic Lenses

Nondestructive Evaluation of Special Defects Based on Ultrasound Metasurface

Escalated Deep-Subwavelength Acoustic Imaging with Field Enhancement Inside a Metalens

Broadband Ultrasonic Focusing in Water with an Ultra-Compact Metasurface Lens

A passively tunable non-resonant acoustic metamaterial lens for selective ultrasonic excitation

A Holey Structured Acoustic Metamaterial

Enhancing Ultrasound Transmission and Focusing Through a Stiff Plate with Inversely Optimized Auxiliary Meta-Lens

Acoustic Metasurface by Layered Concentric Structures

A Holey-Structured Metamaterial for Acoustic Deep-Subwavelength Imaging

Ultrasonic inspection of near surface defects with additive manufactured metasurface lens

Acoustic Subwavelength Imaging Of Subsurface Objects With Acoustic Resonant Metalens

Deep-subwavelength ultrasonic imaging by MHz column-structured metalens: First evidence of quantitative visualization of subsurface defects

High-precision identification and localization of noise sources based on acoustic metamaterials

Damage detection, quantification, and localization for resonant metamaterials using physics-based and data-driven methods

Programmable Waveguiding of Ultrasonic Waves for Regional Damage Detection Using Elastic Metamaterials

Acoustic Planar Antireflective Focusing Lens with Sub-Diffraction-limit Resolution Based on Metamaterials

Acoustic Metamaterials: Acoustic Magnifying Lens for Far‐Field High Resolution Imaging Based on Transformation Acoustics (adv. Mater. Technol. 9/2017)

Experimental Study on Acoustic Subwavelength Imaging of Holey-Structured Metamaterials by Resonant Tunneling

Synthetic Aperture Focusing Imaging for Defect Detection in Highly Attenuative Materials Using Quasi-Static Components of Ultrasonic Longitudinal Waves

Reconfigurable ultrasound focusing effect through acoustic barriers

Subwavelength Acoustic Focusing by Surface-Wave-resonance Enhanced Transmission in Doubly Negative Acoustic Metamaterials