The role of ceramic particles on the crack inhibition and mechanical properties improvement of Haynes 230 alloy fabricated by laser powder bed fusion

Yanan Zhao,Jun He,Bo Li,Zhengjiang Gao,Qianying Guo,Zongqing Ma,Yongchang Liu
DOI: https://doi.org/10.1016/j.jmatprotec.2023.118124
IF: 6.3
2023-11-01
Journal of Materials Processing Technology
Abstract:Extensive studies have proved that the addition of ceramic nanoparticles can improve the crack resistance of alloys fabricated by laser powder bed fusion (LPBF). However, there is still no consensus on mechanism of cracking inhibition of these ceramic particles. Here, we comparatively studied the evolution of grain structure, laser absorption and elemental segregation of Haynes 230 (H230) alloy with the addition of TiC or Y2O3 particles. The results reveal that compared to the H230 sample, cracking is effectively suppressed in the H230-TiC and H230-Y2O3 samples, whereas the grain size and the high/low angle grain boundary ratio fractions do not show significant variations in these samples. That means grain refinement as well as reduction of the high angle grain boundary ratio are not necessary conditions to suppress cracking in the LPBF fabricated alloys with the addition of ceramic particles. Moreover, the ceramic nanoparticles increased the laser absorption of the powders, but this does not have a direct link with cracking inhibition. It was found that the addition of TiC to the H230 alloy promoted the precipitation of intercellular Cr23C6, while the Y2O3 resulted in the purification of the cell boundaries, both of which contributed to the improved crack resistance. The distribution of TiC and Cr23C6 along grain boundaries can significantly improve the strength of the sample at the expense of part of the plasticity. The Y2O3 dispersed in the grain can allow the samples to maintain stable work hardening which is favorable to the enhancement of plasticity.
materials science, multidisciplinary,engineering, manufacturing, industrial
What problem does this paper attempt to address?